config

magit.info (540323B)

---

 This is magit.info, produced by makeinfo version 6.7 from magit.texi.
 
      Copyright (C) 2015-2024 Jonas Bernoulli
      <emacs.magit@jonas.bernoulli.dev>
 
      You can redistribute this document and/or modify it under the terms
      of the GNU General Public License as published by the Free Software
      Foundation, either version 3 of the License, or (at your option)
      any later version.
 
      This document is distributed in the hope that it will be useful,
      but WITHOUT ANY WARRANTY; without even the implied warranty of
      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
      General Public License for more details.
 
 INFO-DIR-SECTION Emacs
 START-INFO-DIR-ENTRY
 * Magit: (magit).       Using Git from Emacs with Magit.
 END-INFO-DIR-ENTRY
 
 
 File: magit.info,  Node: Top,  Next: Introduction,  Up: (dir)
 
 Magit User Manual
 *****************
 
 Magit is an interface to the version control system Git, implemented as
 an Emacs package.  Magit aspires to be a complete Git porcelain.  While
 we cannot (yet) claim that Magit wraps and improves upon each and every
 Git command, it is complete enough to allow even experienced Git users
 to perform almost all of their daily version control tasks directly from
 within Emacs.  While many fine Git clients exist, only Magit and Git
 itself deserve to be called porcelains.
 
 This manual is for Magit version 3.3.0.50-git.
 
      Copyright (C) 2015-2024 Jonas Bernoulli
      <emacs.magit@jonas.bernoulli.dev>
 
      You can redistribute this document and/or modify it under the terms
      of the GNU General Public License as published by the Free Software
      Foundation, either version 3 of the License, or (at your option)
      any later version.
 
      This document is distributed in the hope that it will be useful,
      but WITHOUT ANY WARRANTY; without even the implied warranty of
      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
      General Public License for more details.
 
 * Menu:
 
 * Introduction::
 * Installation::
 * Getting Started::
 * Interface Concepts::
 * Inspecting::
 * Manipulating::
 * Transferring::
 * Miscellaneous::
 * Customizing::
 * Plumbing::
 * FAQ::
 * Debugging Tools::
 * Keystroke Index::
 * Function and Command Index::
 * Variable Index::
 
 — The Detailed Node Listing —
 
 Installation
 
 * Installing from Melpa::
 * Installing from the Git Repository::
 * Post-Installation Tasks::
 
 Interface Concepts
 
 * Modes and Buffers::
 * Sections::
 * Transient Commands::
 * Transient Arguments and Buffer Variables::
 * Completion, Confirmation and the Selection: Completion Confirmation and the Selection.
 * Mouse Support::
 * Running Git::
 
 Modes and Buffers
 
 * Switching Buffers::
 * Naming Buffers::
 * Quitting Windows::
 * Automatic Refreshing of Magit Buffers::
 * Automatic Saving of File-Visiting Buffers::
 * Automatic Reverting of File-Visiting Buffers::
 
 
 Sections
 
 * Section Movement::
 * Section Visibility::
 * Section Hooks::
 * Section Types and Values::
 * Section Options::
 
 
 Completion, Confirmation and the Selection
 
 * Action Confirmation::
 * Completion and Confirmation::
 * The Selection::
 * The hunk-internal region::
 * Support for Completion Frameworks::
 * Additional Completion Options::
 
 
 Running Git
 
 * Viewing Git Output::
 * Git Process Status::
 * Running Git Manually::
 * Git Executable::
 * Global Git Arguments::
 
 
 Inspecting
 
 * Status Buffer::
 * Repository List::
 * Logging::
 * Diffing::
 * Ediffing::
 * References Buffer::
 * Bisecting::
 * Visiting Files and Blobs::
 * Blaming::
 
 Status Buffer
 
 * Status Sections::
 * Status Header Sections::
 * Status Module Sections::
 * Status Options::
 
 
 Logging
 
 * Refreshing Logs::
 * Log Buffer::
 * Log Margin::
 * Select from Log::
 * Reflog::
 * Cherries::
 
 
 Diffing
 
 * Refreshing Diffs::
 * Commands Available in Diffs::
 * Diff Options::
 * Revision Buffer::
 
 
 References Buffer
 
 * References Sections::
 
 
 Visiting Files and Blobs
 
 * General-Purpose Visit Commands::
 * Visiting Files and Blobs from a Diff::
 
 
 Manipulating
 
 * Creating Repository::
 * Cloning Repository::
 * Staging and Unstaging::
 * Applying::
 * Committing::
 * Branching::
 * Merging::
 * Resolving Conflicts::
 * Rebasing::
 * Cherry Picking::
 * Resetting::
 * Stashing::
 
 Staging and Unstaging
 
 * Staging from File-Visiting Buffers::
 
 
 Committing
 
 * Initiating a Commit::
 * Editing Commit Messages::
 
 
 Branching
 
 * The Two Remotes::
 * Branch Commands::
 * Branch Git Variables::
 * Auxiliary Branch Commands::
 
 
 Rebasing
 
 * Editing Rebase Sequences::
 * Information About In-Progress Rebase::
 
 
 Cherry Picking
 
 * Reverting::
 
 
 Transferring
 
 * Remotes::
 * Fetching::
 * Pulling::
 * Pushing::
 * Plain Patches::
 * Maildir Patches::
 
 Remotes
 
 * Remote Commands::
 * Remote Git Variables::
 
 
 Miscellaneous
 
 * Tagging::
 * Notes::
 * Submodules::
 * Subtree::
 * Worktree::
 * Sparse checkouts::
 * Bundle::
 * Common Commands::
 * Wip Modes::
 * Commands for Buffers Visiting Files::
 * Minor Mode for Buffers Visiting Blobs::
 
 Submodules
 
 * Listing Submodules::
 * Submodule Transient::
 
 
 Wip Modes
 
 * Wip Graph::
 * Legacy Wip Modes::
 
 
 Customizing
 
 * Per-Repository Configuration::
 * Essential Settings::
 
 Essential Settings
 
 * Safety::
 * Performance::
 * Global Bindings::
 
 
 Plumbing
 
 * Calling Git::
 * Section Plumbing::
 * Refreshing Buffers::
 * Conventions::
 
 Calling Git
 
 * Getting a Value from Git::
 * Calling Git for Effect::
 
 
 Section Plumbing
 
 * Creating Sections::
 * Section Selection::
 * Matching Sections::
 
 
 Conventions
 
 * Theming Faces::
 
 
 FAQ
 
 * FAQ - How to ...?::
 * FAQ - Issues and Errors::
 
 FAQ - How to ...?
 
 * How to pronounce Magit?::
 * How to show git's output?::
 * How to install the gitman info manual?::
 * How to show diffs for gpg-encrypted files?::
 * How does branching and pushing work?::
 * Should I disable VC?::
 
 
 FAQ - Issues and Errors
 
 * Magit is slow::
 * I changed several thousand files at once and now Magit is unusable::
 * I am having problems committing::
 * I am using MS Windows and cannot push with Magit::
 * I am using macOS and SOMETHING works in shell, but not in Magit: I am using macOS and SOMETHING works in shell but not in Magit.
 * Expanding a file to show the diff causes it to disappear::
 * Point is wrong in the COMMIT_EDITMSG buffer::
 * The mode-line information isn't always up-to-date::
 * A branch and tag sharing the same name breaks SOMETHING::
 * My Git hooks work on the command-line but not inside Magit::
 * git-commit-mode isn't used when committing from the command-line::
 * Point ends up inside invisible text when jumping to a file-visiting buffer::
 * I am no longer able to save popup defaults::
 
 
 
 
 File: magit.info,  Node: Introduction,  Next: Installation,  Prev: Top,  Up: Top
 
 1 Introduction
 **************
 
 Magit is an interface to the version control system Git, implemented as
 an Emacs package.  Magit aspires to be a complete Git porcelain.  While
 we cannot (yet) claim that Magit wraps and improves upon each and every
 Git command, it is complete enough to allow even experienced Git users
 to perform almost all of their daily version control tasks directly from
 within Emacs.  While many fine Git clients exist, only Magit and Git
 itself deserve to be called porcelains.
 
    Staging and otherwise applying changes is one of the most important
 features in a Git porcelain and here Magit outshines anything else,
 including Git itself.  Git’s own staging interface (‘git add --patch’)
 is so cumbersome that many users only use it in exceptional cases.  In
 Magit staging a hunk or even just part of a hunk is as trivial as
 staging all changes made to a file.
 
    The most visible part of Magit’s interface is the status buffer,
 which displays information about the current repository.  Its content is
 created by running several Git commands and making their output
 actionable.  Among other things, it displays information about the
 current branch, lists unpulled and unpushed changes and contains
 sections displaying the staged and unstaged changes.  That might sound
 noisy, but, since sections are collapsible, it’s not.
 
    To stage or unstage a change one places the cursor on the change and
 then types ‘s’ or ‘u’.  The change can be a file or a hunk, or when the
 region is active (i.e., when there is a selection) several files or
 hunks, or even just part of a hunk.  The change or changes that these
 commands - and many others - would act on are highlighted.
 
    Magit also implements several other "apply variants" in addition to
 staging and unstaging.  One can discard or reverse a change, or apply it
 to the working tree.  Git’s own porcelain only supports this for staging
 and unstaging and you would have to do something like ‘git diff ... |
 ??? | git apply ...’ to discard, revert, or apply a single hunk on the
 command line.  In fact that’s exactly what Magit does internally (which
 is what lead to the term "apply variants").
 
    Magit isn’t just for Git experts, but it does assume some prior
 experience with Git as well as Emacs.  That being said, many users have
 reported that using Magit was what finally taught them what Git is
 capable of and how to use it to its fullest.  Other users wished they
 had switched to Emacs sooner so that they would have gotten their hands
 on Magit earlier.
 
    While one has to know the basic features of Emacs to be able to make
 full use of Magit, acquiring just enough Emacs skills doesn’t take long
 and is worth it, even for users who prefer other editors.  Vim users are
 advised to give Evil (https://github.com/emacs-evil/evil), the
 "Extensible VI Layer for Emacs", and Spacemacs
 (https://github.com/syl20bnr/spacemacs), an "Emacs starter-kit focused
 on Evil" a try.
 
    Magit provides a consistent and efficient Git porcelain.  After a
 short learning period, you will be able to perform most of your daily
 version control tasks faster than you would on the command line.  You
 will likely also start using features that seemed too daunting in the
 past.
 
    Magit fully embraces Git.  It exposes many advanced features using a
 simple but flexible interface instead of only wrapping the trivial ones
 like many GUI clients do.  Of course Magit supports logging, cloning,
 pushing, and other commands that usually don’t fail in spectacular ways;
 but it also supports tasks that often cannot be completed in a single
 step.  Magit fully supports tasks such as merging, rebasing,
 cherry-picking, reverting, and blaming by not only providing a command
 to initiate these tasks but also by displaying context sensitive
 information along the way and providing commands that are useful for
 resolving conflicts and resuming the sequence after doing so.
 
    Magit wraps and in many cases improves upon at least the following
 Git porcelain commands: ‘add’, ‘am’, ‘bisect’, ‘blame’, ‘branch’,
 ‘checkout’, ‘cherry’, ‘cherry-pick’, ‘clean’, ‘clone’, ‘commit’,
 ‘config’, ‘describe’, ‘diff’, ‘fetch’, ‘format-patch’, ‘init’, ‘log’,
 ‘merge’, ‘merge-tree’, ‘mv’, ‘notes’, ‘pull’, ‘rebase’, ‘reflog’,
 ‘remote’, ‘request-pull’, ‘reset’, ‘revert’, ‘rm’, ‘show’, ‘stash’,
 ‘submodule’, ‘subtree’, ‘tag’, and ‘worktree.’ Many more Magit porcelain
 commands are implemented on top of Git plumbing commands.
 
 
 File: magit.info,  Node: Installation,  Next: Getting Started,  Prev: Introduction,  Up: Top
 
 2 Installation
 **************
 
 Magit can be installed using Emacs’ package manager or manually from its
 development repository.
 
 * Menu:
 
 * Installing from Melpa::
 * Installing from the Git Repository::
 * Post-Installation Tasks::
 
 
 File: magit.info,  Node: Installing from Melpa,  Next: Installing from the Git Repository,  Up: Installation
 
 2.1 Installing from Melpa
 =========================
 
 Magit is available from Melpa and Melpa-Stable.  If you haven’t used
 Emacs’ package manager before, then it is high time you familiarize
 yourself with it by reading the documentation in the Emacs manual, see
 *note (emacs)Packages::.  Then add one of the archives to
 ‘package-archives’:
 
    • To use Melpa:
 
      (require 'package)
      (add-to-list 'package-archives
                   '("melpa" . "https://melpa.org/packages/") t)
 
    • To use Melpa-Stable:
 
      (require 'package)
      (add-to-list 'package-archives
                   '("melpa-stable" . "https://stable.melpa.org/packages/") t)
 
    Once you have added your preferred archive, you need to update the
 local package list using:
 
      M-x package-refresh-contents RET
 
    Once you have done that, you can install Magit and its dependencies
 using:
 
      M-x package-install RET magit RET
 
    Now see *note Post-Installation Tasks::.
 
 
 File: magit.info,  Node: Installing from the Git Repository,  Next: Post-Installation Tasks,  Prev: Installing from Melpa,  Up: Installation
 
 2.2 Installing from the Git Repository
 ======================================
 
 Magit depends on the ‘compat’, ‘dash’, ‘transient’ and ‘with-editor’
 libraries which are available from Melpa and Melpa-Stable.  Install them
 using ‘M-x package-install RET <package> RET’.  Of course you may also
 install them manually from their repository.
 
    Then clone the Magit repository:
 
      $ git clone https://github.com/magit/magit.git ~/.emacs.d/site-lisp/magit
      $ cd ~/.emacs.d/site-lisp/magit
 
    Then compile the libraries and generate the info manuals:
 
      $ make
 
    If you haven’t installed ‘compat’, ‘dash’, ‘transient’ and
 ‘with-editor’ from Melpa or at ‘/path/to/magit/../<package>’, then you
 have to tell ‘make’ where to find them.  To do so create the file
 ‘/path/to/magit/config.mk’ with the following content before running
 ‘make’:
 
      LOAD_PATH  = -L ~/.emacs.d/site-lisp/magit/lisp
      LOAD_PATH += -L ~/.emacs.d/site-lisp/dash
      LOAD_PATH += -L ~/.emacs.d/site-lisp/transient/lisp
      LOAD_PATH += -L ~/.emacs.d/site-lisp/with-editor/lisp
      LOAD_PATH += -L ~/.emacs.d/site-lisp/compat
 
    Finally add this to your init file:
 
      (add-to-list 'load-path "~/.emacs.d/site-lisp/magit/lisp")
      (require 'magit)
 
      (with-eval-after-load 'info
        (info-initialize)
        (add-to-list 'Info-directory-list
                     "~/.emacs.d/site-lisp/magit/Documentation/"))
 
    Of course if you installed the dependencies manually as well, then
 you have to tell Emacs about them too, by prefixing the above with:
 
      (add-to-list 'load-path "~/.emacs.d/site-lisp/dash")
      (add-to-list 'load-path "~/.emacs.d/site-lisp/transient/lisp")
      (add-to-list 'load-path "~/.emacs.d/site-lisp/with-editor")
 
    Note that you have to add the ‘lisp’ subdirectory to the ‘load-path’,
 not the top-level of the repository, and that elements of ‘load-path’
 should not end with a slash, while those of ‘Info-directory-list’
 should.
 
    Instead of requiring the feature ‘magit’, you could load just the
 autoload definitions, by loading the file ‘magit-autoloads.el’.
 
      (load "/path/to/magit/lisp/magit-autoloads")
 
    Instead of running Magit directly from the repository by adding that
 to the ‘load-path’, you might want to instead install it in some other
 directory using ‘sudo make install’ and setting ‘load-path’ accordingly.
 
    To update Magit use:
 
      $ git pull
      $ make
 
    At times it might be necessary to run ‘make clean all’ instead.
 
    To view all available targets use ‘make help’.
 
    Now see *note Post-Installation Tasks::.
 
 
 File: magit.info,  Node: Post-Installation Tasks,  Prev: Installing from the Git Repository,  Up: Installation
 
 2.3 Post-Installation Tasks
 ===========================
 
 After installing Magit you should verify that you are indeed using the
 Magit, Git, and Emacs releases you think you are using.  It’s best to
 restart Emacs before doing so, to make sure you are not using an
 outdated value for ‘load-path’.
 
      M-x magit-version RET
 
    should display something like
 
      Magit 2.8.0, Git 2.10.2, Emacs 25.1.1, gnu/linux
 
    Then you might also want to read about options that many users likely
 want to customize.  See *note Essential Settings::.
 
    To be able to follow cross references to Git manpages found in this
 manual, you might also have to manually install the ‘gitman’ info
 manual, or advice ‘Info-follow-nearest-node’ to instead open the actual
 manpage.  See *note How to install the gitman info manual?::.
 
    If you are completely new to Magit then see *note Getting Started::.
 
    If you run into problems, then please see the *note FAQ::.  Also see
 the *note Debugging Tools::.
 
    And last but not least please consider making a donation, to ensure
 that I can keep working on Magit.  See <https://magit.vc/donations>.
 for various donation options.
 
 
 File: magit.info,  Node: Getting Started,  Next: Interface Concepts,  Prev: Installation,  Up: Top
 
 3 Getting Started
 *****************
 
 This short tutorial describes the most essential features that many
 Magitians use on a daily basis.  It only scratches the surface but
 should be enough to get you started.
 
    IMPORTANT: It is safest if you clone some repository just for this
 tutorial.  Alternatively you can use an existing local repository, but
 if you do that, then you should commit all uncommitted changes before
 proceeding.
 
    Type ‘C-x g’ to display information about the current Git repository
 in a dedicated buffer, called the status buffer.
 
    Most Magit commands are commonly invoked from the status buffer.  It
 can be considered the primary interface for interacting with Git using
 Magit.  Many other Magit buffers may exist at a given time, but they are
 often created from this buffer.
 
    Depending on what state your repository is in, this buffer may
 contain sections titled "Staged changes", "Unstaged changes", "Unmerged
 into origin/master", "Unpushed to origin/master", and many others.
 
    Since we are starting from a safe state, which you can easily return
 to (by doing a ‘git reset --hard PRE-MAGIT-STATE’), there currently are
 no staged or unstaged changes.  Edit some files and save the changes.
 Then go back to the status buffer, while at the same time refreshing it,
 by typing ‘C-x g’.  (When the status buffer, or any Magit buffer for
 that matter, is the current buffer, then you can also use just ‘g’ to
 refresh it).
 
    Move between sections using ‘p’ and ‘n’.  Note that the bodies of
 some sections are hidden.  Type ‘TAB’ to expand or collapse the section
 at point.  You can also use ‘C-tab’ to cycle the visibility of the
 current section and its children.  Move to a file section inside the
 section named "Unstaged changes" and type ‘s’ to stage the changes you
 have made to that file.  That file now appears under "Staged changes".
 
    Magit can stage and unstage individual hunks, not just complete
 files.  Move to the file you have just staged, expand it using ‘TAB’,
 move to one of the hunks using ‘n’, and unstage just that by typing ‘u’.
 Note how the staging (‘s’) and unstaging (‘u’) commands operate on the
 change at point.  Many other commands behave the same way.
 
    You can also un-/stage just part of a hunk.  Inside the body of a
 hunk section (move there using ‘C-n’), set the mark using ‘C-SPC’ and
 move down until some added and/or removed lines fall inside the region
 but not all of them.  Again type ‘s’ to stage.
 
    It is also possible to un-/stage multiple files at once.  Move to a
 file section, type ‘C-SPC’, move to the next file using ‘n’, and then
 ‘s’ to stage both files.  Note that both the mark and point have to be
 on the headings of sibling sections for this to work.  If the region
 looks like it does in other buffers, then it doesn’t select Magit
 sections that can be acted on as a unit.
 
    And then of course you want to commit your changes.  Type ‘c’.  This
 shows the available commit commands and arguments in a buffer at the
 bottom of the frame.  Each command and argument is prefixed with the key
 that invokes/sets it.  Do not worry about this for now.  We want to
 create a "normal" commit, which is done by typing ‘c’ again.
 
    Now two new buffers appear.  One is for writing the commit message,
 the other shows a diff with the changes that you are about to commit.
 Write a message and then type ‘C-c C-c’ to actually create the commit.
 
    You probably don’t want to push the commit you just created because
 you just committed some random changes, but if that is not the case you
 could push it by typing ‘P’ to show all the available push commands and
 arguments and then ‘p’ to push to a branch with the same name as the
 local branch onto the remote configured as the push-remote.  (If the
 push-remote is not configured yet, then you would first be prompted for
 the remote to push to.)
 
    So far we have mentioned the commit and push menu commands.  These
 are probably among the menus you will be using the most, but many others
 exist.  To show a menu that lists all other menus (as well as the
 various apply commands and some other essential commands), type ‘h’.
 Try a few.  (Such menus are also called "transient prefix commands" or
 just "transients".)
 
    The key bindings in that menu correspond to the bindings in Magit
 buffers, including but not limited to the status buffer.  So you could
 type ‘h d’ to bring up the diff menu, but once you remember that "d"
 stands for "diff", you would usually do so by just typing ‘d’.
 
    This "prefix of prefixes" is useful even once you have memorized all
 the bindings, as it can provide easy access to Magit commands from
 non-Magit buffers.  So, by default, it is globally bound to ‘C-x M-g’.
 
    A similar menu featuring (for the most part) commands that act on
 just the file being visited in the current buffer, is globally bound to
 ‘C-c M-g’.  That binding can also be used in buffers, which do not visit
 a file, but then only a subset of the commands is available.
 
    The global key bindings mentioned in the previous two paragraphs are
 quite inconvenient.  We recommend using ‘C-c g’ and ‘C-c f’ instead, but
 cannot use those key sequences by default because they are strickly
 reserved for bindings added by the user.  See *note Global Bindings::,
 if you want to explicitly opt-in to the recommended key bindings.
 
    Magit also provides context menus and other mouse commands, see *note
 Mouse Support::.
 
    It is not necessary that you do so now, but if you stick with Magit,
 then it is highly recommended that you read the next section too.
 
 
 File: magit.info,  Node: Interface Concepts,  Next: Inspecting,  Prev: Getting Started,  Up: Top
 
 4 Interface Concepts
 ********************
 
 * Menu:
 
 * Modes and Buffers::
 * Sections::
 * Transient Commands::
 * Transient Arguments and Buffer Variables::
 * Completion, Confirmation and the Selection: Completion Confirmation and the Selection.
 * Mouse Support::
 * Running Git::
 
 
 File: magit.info,  Node: Modes and Buffers,  Next: Sections,  Up: Interface Concepts
 
 4.1 Modes and Buffers
 =====================
 
 Magit provides several major-modes.  For each of these modes there
 usually exists only one buffer per repository.  Separate modes and thus
 buffers exist for commits, diffs, logs, and some other things.
 
    Besides these special purpose buffers, there also exists an overview
 buffer, called the *status buffer*.  It’s usually from this buffer that
 the user invokes Git commands, or creates or visits other buffers.
 
    In this manual we often speak about "Magit buffers".  By that we mean
 buffers whose major-modes derive from ‘magit-mode’.
 
 ‘M-x magit-toggle-buffer-lock’
      This command locks the current buffer to its value or if the buffer
      is already locked, then it unlocks it.
 
      Locking a buffer to its value prevents it from being reused to
      display another value.  The name of a locked buffer contains its
      value, which allows telling it apart from other locked buffers and
      the unlocked buffer.
 
      Not all Magit buffers can be locked to their values; for example,
      it wouldn’t make sense to lock a status buffer.
 
      There can only be a single unlocked buffer using a certain
      major-mode per repository.  So when a buffer is being unlocked and
      another unlocked buffer already exists for that mode and
      repository, then the former buffer is instead deleted and the
      latter is displayed in its place.
 
 * Menu:
 
 * Switching Buffers::
 * Naming Buffers::
 * Quitting Windows::
 * Automatic Refreshing of Magit Buffers::
 * Automatic Saving of File-Visiting Buffers::
 * Automatic Reverting of File-Visiting Buffers::
 
 
 File: magit.info,  Node: Switching Buffers,  Next: Naming Buffers,  Up: Modes and Buffers
 
 4.1.1 Switching Buffers
 -----------------------
 
  -- Function: magit-display-buffer buffer &optional display-function
      This function is a wrapper around ‘display-buffer’ and is used to
      display any Magit buffer.  It displays BUFFER in some window and,
      unlike ‘display-buffer’, also selects that window, provided
      ‘magit-display-buffer-noselect’ is ‘nil’.  It also runs the hooks
      mentioned below.
 
      If optional DISPLAY-FUNCTION is non-nil, then that is used to
      display the buffer.  Usually that is ‘nil’ and the function
      specified by ‘magit-display-buffer-function’ is used.
 
  -- Variable: magit-display-buffer-noselect
      When this is non-nil, then ‘magit-display-buffer’ only displays the
      buffer but forgoes also selecting the window.  This variable should
      not be set globally, it is only intended to be let-bound, by code
      that automatically updates "the other window".  This is used for
      example when the revision buffer is updated when you move inside
      the log buffer.
 
  -- User Option: magit-display-buffer-function
      The function specified here is called by ‘magit-display-buffer’
      with one argument, a buffer, to actually display that buffer.  This
      function should call ‘display-buffer’ with that buffer as first and
      a list of display actions as second argument.
 
      Magit provides several functions, listed below, that are suitable
      values for this option.  If you want to use different rules, then a
      good way of doing that is to start with a copy of one of these
      functions and then adjust it to your needs.
 
      Instead of using a wrapper around ‘display-buffer’, that function
      itself can be used here, in which case the display actions have to
      be specified by adding them to ‘display-buffer-alist’ instead.
 
      To learn about display actions, see *note (elisp)Choosing Window::.
 
  -- Function: magit-display-buffer-traditional buffer
      This function is the current default value of the option
      ‘magit-display-buffer-function’.  Before that option and this
      function were added, the behavior was hard-coded in many places all
      over the code base but now all the rules are contained in this one
      function (except for the "noselect" special case mentioned above).
 
  -- Function: magit-display-buffer-same-window-except-diff-v1
      This function displays most buffers in the currently selected
      window.  If a buffer’s mode derives from ‘magit-diff-mode’ or
      ‘magit-process-mode’, it is displayed in another window.
 
  -- Function: magit-display-buffer-fullframe-status-v1
      This function fills the entire frame when displaying a status
      buffer.  Otherwise, it behaves like
      ‘magit-display-buffer-traditional’.
 
  -- Function: magit-display-buffer-fullframe-status-topleft-v1
      This function fills the entire frame when displaying a status
      buffer.  It behaves like ‘magit-display-buffer-fullframe-status-v1’
      except that it displays buffers that derive from ‘magit-diff-mode’
      or ‘magit-process-mode’ to the top or left of the current buffer
      rather than to the bottom or right.  As a result, Magit buffers
      tend to pop up on the same side as they would if
      ‘magit-display-buffer-traditional’ were in use.
 
  -- Function: magit-display-buffer-fullcolumn-most-v1
      This function displays most buffers so that they fill the entire
      height of the frame.  However, the buffer is displayed in another
      window if (1) the buffer’s mode derives from ‘magit-process-mode’,
      or (2) the buffer’s mode derives from ‘magit-diff-mode’, provided
      that the mode of the current buffer derives from ‘magit-log-mode’
      or ‘magit-cherry-mode’.
 
  -- User Option: magit-pre-display-buffer-hook
      This hook is run by ‘magit-display-buffer’ before displaying the
      buffer.
 
  -- Function: magit-save-window-configuration
      This function saves the current window configuration.  Later when
      the buffer is buried, it may be restored by
      ‘magit-restore-window-configuration’.
 
  -- User Option: magit-post-display-buffer-hook
      This hook is run by ‘magit-display-buffer’ after displaying the
      buffer.
 
  -- Function: magit-maybe-set-dedicated
      This function remembers if a new window had to be created to
      display the buffer, or whether an existing window was reused.  This
      information is later used by ‘magit-mode-quit-window’, to determine
      whether the window should be deleted when its last Magit buffer is
      buried.
 
 
 File: magit.info,  Node: Naming Buffers,  Next: Quitting Windows,  Prev: Switching Buffers,  Up: Modes and Buffers
 
 4.1.2 Naming Buffers
 --------------------
 
  -- User Option: magit-generate-buffer-name-function
      The function used to generate the names of Magit buffers.
 
      Such a function should take the options
      ‘magit-uniquify-buffer-names’ as well as ‘magit-buffer-name-format’
      into account.  If it doesn’t, then should be clearly stated in the
      doc-string.  And if it supports %-sequences beyond those mentioned
      in the doc-string of the option ‘magit-buffer-name-format’, then
      its own doc-string should describe the additions.
 
  -- Function: magit-generate-buffer-name-default-function mode
      This function returns a buffer name suitable for a buffer whose
      major-mode is MODE and which shows information about the repository
      in which ‘default-directory’ is located.
 
      This function uses ‘magit-buffer-name-format’ and supporting all of
      the %-sequences mentioned the documentation of that option.  It
      also respects the option ‘magit-uniquify-buffer-names’.
 
  -- User Option: magit-buffer-name-format
      The format string used to name Magit buffers.
 
      At least the following %-sequences are supported:
 
         • ‘%m’
 
           The name of the major-mode, but with the ‘-mode’ suffix
           removed.
 
         • ‘%M’
 
           Like ‘%m’ but abbreviate ‘magit-status-mode’ as ‘magit’.
 
         • ‘%v’
 
           The value the buffer is locked to, in parentheses, or an empty
           string if the buffer is not locked to a value.
 
         • ‘%V’
 
           Like ‘%v’, but the string is prefixed with a space, unless it
           is an empty string.
 
         • ‘%t’
 
           The top-level directory of the working tree of the repository,
           or if ‘magit-uniquify-buffer-names’ is non-nil an abbreviation
           of that.
 
         • ‘%x’
 
           If ‘magit-uniquify-buffer-names’ is nil "*", otherwise the
           empty string.  Due to limitations of the ‘uniquify’ package,
           buffer names must end with the path.
 
      The value should always contain ‘%m’ or ‘%M’, ‘%v’ or ‘%V’, and
      ‘%t’.  If ‘magit-uniquify-buffer-names’ is non-nil, then the value
      must end with ‘%t’ or ‘%t%x’.  See issue #2841.
 
  -- User Option: magit-uniquify-buffer-names
      This option controls whether the names of Magit buffers are
      uniquified.  If the names are not being uniquified, then they
      contain the full path of the top-level of the working tree of the
      corresponding repository.  If they are being uniquified, then they
      end with the basename of the top-level, or if that would conflict
      with the name used for other buffers, then the names of all these
      buffers are adjusted until they no longer conflict.
 
      This is done using the ‘uniquify’ package; customize its options to
      control how buffer names are uniquified.
 
 
 File: magit.info,  Node: Quitting Windows,  Next: Automatic Refreshing of Magit Buffers,  Prev: Naming Buffers,  Up: Modes and Buffers
 
 4.1.3 Quitting Windows
 ----------------------
 
 ‘q’ (‘magit-mode-bury-buffer’)
      This command buries or kills the current Magit buffer.  The
      function specified by option ‘magit-bury-buffer-function’ is used
      to bury the buffer when called without a prefix argument or to kill
      it when called with a single prefix argument.
 
      When called with two or more prefix arguments then it always kills
      all Magit buffers, associated with the current project, including
      the current buffer.
 
  -- User Option: magit-bury-buffer-function
      The function used to actually bury or kill the current buffer.
 
      ‘magit-mode-bury-buffer’ calls this function with one argument.  If
      the argument is non-nil, then the function has to kill the current
      buffer.  Otherwise it has to bury it alive.  The default value
      currently is ‘magit-mode-quit-window’.
 
  -- Function: magit-restore-window-configuration kill-buffer
      Bury or kill the current buffer using ‘quit-window’, which is
      called with KILL-BUFFER as first and the selected window as second
      argument.
 
      Then restore the window configuration that existed right before the
      current buffer was displayed in the selected frame.  Unfortunately
      that also means that point gets adjusted in all the buffers, which
      are being displayed in the selected frame.
 
  -- Function: magit-mode-quit-window kill-buffer
      Bury or kill the current buffer using ‘quit-window’, which is
      called with KILL-BUFFER as first and the selected window as second
      argument.
 
      Then, if the window was originally created to display a Magit
      buffer and the buried buffer was the last remaining Magit buffer
      that was ever displayed in the window, then that is deleted.
 
 
 File: magit.info,  Node: Automatic Refreshing of Magit Buffers,  Next: Automatic Saving of File-Visiting Buffers,  Prev: Quitting Windows,  Up: Modes and Buffers
 
 4.1.4 Automatic Refreshing of Magit Buffers
 -------------------------------------------
 
 After running a command which may change the state of the current
 repository, the current Magit buffer and the corresponding status buffer
 are refreshed.  The status buffer can be automatically refreshed
 whenever a buffer is saved to a file inside the respective repository by
 adding a hook, like so:
 
      (with-eval-after-load 'magit-mode
        (add-hook 'after-save-hook 'magit-after-save-refresh-status t))
 
    Automatically refreshing Magit buffers ensures that the displayed
 information is up-to-date most of the time but can lead to a noticeable
 delay in big repositories.  Other Magit buffers are not refreshed to
 keep the delay to a minimum and also because doing so can sometimes be
 undesirable.
 
    Buffers can also be refreshed explicitly, which is useful in buffers
 that weren’t current during the last refresh and after changes were made
 to the repository outside of Magit.
 
 ‘g’ (‘magit-refresh’)
      This command refreshes the current buffer if its major mode derives
      from ‘magit-mode’ as well as the corresponding status buffer.
 
      If the option ‘magit-revert-buffers’ calls for it, then it also
      reverts all unmodified buffers that visit files being tracked in
      the current repository.
 
 ‘G’ (‘magit-refresh-all’)
      This command refreshes all Magit buffers belonging to the current
      repository and also reverts all unmodified buffers that visit files
      being tracked in the current repository.
 
      The file-visiting buffers are always reverted, even if
      ‘magit-revert-buffers’ is nil.
 
  -- User Option: magit-refresh-buffer-hook
      This hook is run in each Magit buffer that was refreshed during the
      current refresh - normally the current buffer and the status
      buffer.
 
  -- User Option: magit-refresh-status-buffer
      When this option is non-nil, then the status buffer is
      automatically refreshed after running git for side-effects, in
      addition to the current Magit buffer, which is always refreshed
      automatically.
 
      Only set this to nil after exhausting all other options to improve
      performance.
 
  -- Function: magit-after-save-refresh-status
      This function is intended to be added to ‘after-save-hook’.  After
      doing that the corresponding status buffer is refreshed whenever a
      buffer is saved to a file inside a repository.
 
      Note that refreshing a Magit buffer is done by re-creating its
      contents from scratch, which can be slow in large repositories.  If
      you are not satisfied with Magit’s performance, then you should
      obviously not add this function to that hook.
 
 
 File: magit.info,  Node: Automatic Saving of File-Visiting Buffers,  Next: Automatic Reverting of File-Visiting Buffers,  Prev: Automatic Refreshing of Magit Buffers,  Up: Modes and Buffers
 
 4.1.5 Automatic Saving of File-Visiting Buffers
 -----------------------------------------------
 
 File-visiting buffers are by default saved at certain points in time.
 This doesn’t guarantee that Magit buffers are always up-to-date, but,
 provided one only edits files by editing them in Emacs and uses only
 Magit to interact with Git, one can be fairly confident.  When in doubt
 or after outside changes, type ‘g’ (‘magit-refresh’) to save and refresh
 explicitly.
 
  -- User Option: magit-save-repository-buffers
      This option controls whether file-visiting buffers are saved before
      certain events.
 
      If this is non-nil then all modified file-visiting buffers
      belonging to the current repository may be saved before running
      commands, before creating new Magit buffers, and before explicitly
      refreshing such buffers.  If this is ‘dontask’ then this is done
      without user intervention.  If it is ‘t’ then the user has to
      confirm each save.
 
 
 File: magit.info,  Node: Automatic Reverting of File-Visiting Buffers,  Prev: Automatic Saving of File-Visiting Buffers,  Up: Modes and Buffers
 
 4.1.6 Automatic Reverting of File-Visiting Buffers
 --------------------------------------------------
 
 By default Magit automatically reverts buffers that are visiting files
 that are being tracked in a Git repository, after they have changed on
 disk.  When using Magit one often changes files on disk by running Git,
 i.e., "outside Emacs", making this a rather important feature.
 
    For example, if you discard a change in the status buffer, then that
 is done by running ‘git apply --reverse ...’, and Emacs considers the
 file to have "changed on disk".  If Magit did not automatically revert
 the buffer, then you would have to type ‘M-x revert-buffer RET RET’ in
 the visiting buffer before you could continue making changes.
 
  -- User Option: magit-auto-revert-mode
      When this mode is enabled, then buffers that visit tracked files
      are automatically reverted after the visited files change on disk.
 
  -- User Option: global-auto-revert-mode
      When this mode is enabled, then any file-visiting buffer is
      automatically reverted after the visited file changes on disk.
 
      If you like buffers that visit tracked files to be automatically
      reverted, then you might also like any buffer to be reverted, not
      just those visiting tracked files.  If that is the case, then
      enable this mode _instead of_ ‘magit-auto-revert-mode’.
 
  -- User Option: magit-auto-revert-immediately
      This option controls whether Magit reverts buffers immediately.
 
      If this is non-nil and either ‘global-auto-revert-mode’ or
      ‘magit-auto-revert-mode’ is enabled, then Magit immediately reverts
      buffers by explicitly calling ‘auto-revert-buffers’ after running
      Git for side-effects.
 
      If ‘auto-revert-use-notify’ is non-nil (and file notifications are
      actually supported), then ‘magit-auto-revert-immediately’ does not
      have to be non-nil, because the reverts happen immediately anyway.
 
      If ‘magit-auto-revert-immediately’ and ‘auto-revert-use-notify’ are
      both ‘nil’, then reverts happen after ‘auto-revert-interval’
      seconds of user inactivity.  That is not desirable.
 
  -- User Option: auto-revert-use-notify
      This option controls whether file notification functions should be
      used.  Note that this variable unfortunately defaults to ‘t’ even
      on systems on which file notifications cannot be used.
 
  -- User Option: magit-auto-revert-tracked-only
      This option controls whether ‘magit-auto-revert-mode’ only reverts
      tracked files or all files that are located inside Git
      repositories, including untracked files and files located inside
      Git’s control directory.
 
  -- User Option: auto-revert-mode
      The global mode ‘magit-auto-revert-mode’ works by turning on this
      local mode in the appropriate buffers (but
      ‘global-auto-revert-mode’ is implemented differently).  You can
      also turn it on or off manually, which might be necessary if Magit
      does not notice that a previously untracked file now is being
      tracked or vice-versa.
 
  -- User Option: auto-revert-stop-on-user-input
      This option controls whether the arrival of user input suspends the
      automatic reverts for ‘auto-revert-interval’ seconds.
 
  -- User Option: auto-revert-interval
      This option controls how many seconds Emacs waits for before
      resuming suspended reverts.
 
  -- User Option: auto-revert-buffer-list-filter
      This option specifies an additional filter used by
      ‘auto-revert-buffers’ to determine whether a buffer should be
      reverted or not.
 
      This option is provided by Magit, which also advises
      ‘auto-revert-buffers’ to respect it.  Magit users who do not turn
      on the local mode ‘auto-revert-mode’ themselves, are best served by
      setting the value to ‘magit-auto-revert-repository-buffer-p’.
 
      However the default is nil, so as not to disturb users who do use
      the local mode directly.  If you experience delays when running
      Magit commands, then you should consider using one of the
      predicates provided by Magit - especially if you also use Tramp.
 
      Users who do turn on ‘auto-revert-mode’ in buffers in which Magit
      doesn’t do that for them, should likely not use any filter.  Users
      who turn on ‘global-auto-revert-mode’, do not have to worry about
      this option, because it is disregarded if the global mode is
      enabled.
 
  -- User Option: auto-revert-verbose
      This option controls whether Emacs reports when a buffer has been
      reverted.
 
    The options with the ‘auto-revert-’ prefix are located in the Custom
 group named ‘auto-revert’.  The other, Magit-specific, options are
 located in the ‘magit’ group.
 
 * Menu:
 
 * Risk of Reverting Automatically::
 
 
 File: magit.info,  Node: Risk of Reverting Automatically,  Up: Automatic Reverting of File-Visiting Buffers
 
 Risk of Reverting Automatically
 ...............................
 
 For the vast majority of users, automatically reverting file-visiting
 buffers after they have changed on disk is harmless.
 
    If a buffer is modified (i.e., it contains changes that haven’t been
 saved yet), then Emacs will refuse to automatically revert it.  If you
 save a previously modified buffer, then that results in what is seen by
 Git as an uncommitted change.  Git will then refuse to carry out any
 commands that would cause these changes to be lost.  In other words, if
 there is anything that could be lost, then either Git or Emacs will
 refuse to discard the changes.
 
    However, if you use file-visiting buffers as a sort of ad hoc
 "staging area", then the automatic reverts could potentially cause data
 loss.  So far I have heard from only one user who uses such a workflow.
 
    An example: You visit some file in a buffer, edit it, and save the
 changes.  Then, outside of Emacs (or at least not using Magit or by
 saving the buffer) you change the file on disk again.  At this point the
 buffer is the only place where the intermediate version still exists.
 You have saved the changes to disk, but that has since been overwritten.
 Meanwhile Emacs considers the buffer to be unmodified (because you have
 not made any changes to it since you last saved it to the visited file)
 and therefore would not object to it being automatically reverted.  At
 this point an Auto-Revert mode would kick in.  It would check whether
 the buffer is modified and since that is not the case it would revert
 it.  The intermediate version would be lost.  (Actually you could still
 get it back using the ‘undo’ command.)
 
    If your workflow depends on Emacs preserving the intermediate version
 in the buffer, then you have to disable all Auto-Revert modes.  But
 please consider that such a workflow would be dangerous even without
 using an Auto-Revert mode, and should therefore be avoided.  If Emacs
 crashes or if you quit Emacs by mistake, then you would also lose the
 buffer content.  There would be no autosave file still containing the
 intermediate version (because that was deleted when you saved the
 buffer) and you would not be asked whether you want to save the buffer
 (because it isn’t modified).
 
 
 File: magit.info,  Node: Sections,  Next: Transient Commands,  Prev: Modes and Buffers,  Up: Interface Concepts
 
 4.2 Sections
 ============
 
 Magit buffers are organized into nested sections, which can be collapsed
 and expanded, similar to how sections are handled in Org mode.  Each
 section also has a type, and some sections also have a value.  For each
 section type there can also be a local keymap, shared by all sections of
 that type.
 
    Taking advantage of the section value and type, many commands operate
 on the current section, or when the region is active and selects
 sections of the same type, all of the selected sections.  Commands that
 only make sense for a particular section type (as opposed to just
 behaving differently depending on the type) are usually bound in section
 type keymaps.
 
 * Menu:
 
 * Section Movement::
 * Section Visibility::
 * Section Hooks::
 * Section Types and Values::
 * Section Options::
 
 
 File: magit.info,  Node: Section Movement,  Next: Section Visibility,  Up: Sections
 
 4.2.1 Section Movement
 ----------------------
 
 To move within a section use the usual keys (‘C-p’, ‘C-n’, ‘C-b’, ‘C-f’
 etc), whose global bindings are not shadowed.  To move to another
 section use the following commands.
 
 ‘p’ (‘magit-section-backward’)
      When not at the beginning of a section, then move to the beginning
      of the current section.  At the beginning of a section, instead
      move to the beginning of the previous visible section.
 
 ‘n’ (‘magit-section-forward’)
      Move to the beginning of the next visible section.
 
 ‘M-p’ (‘magit-section-backward-siblings’)
      Move to the beginning of the previous sibling section.  If there is
      no previous sibling section, then move to the parent section
      instead.
 
 ‘M-n’ (‘magit-section-forward-siblings’)
      Move to the beginning of the next sibling section.  If there is no
      next sibling section, then move to the parent section instead.
 
 ‘^’ (‘magit-section-up’)
      Move to the beginning of the parent of the current section.
 
    The above commands all call the hook ‘magit-section-movement-hook’.
 Any of the functions listed below can be used as members of this hook.
 
    You might want to remove some of the functions that Magit adds using
 ‘add-hook’.  In doing so you have to make sure you do not attempt to
 remove function that haven’t even been added yet, for example:
 
      (with-eval-after-load 'magit-diff
        (remove-hook 'magit-section-movement-hook
                     'magit-hunk-set-window-start))
 
  -- Variable: magit-section-movement-hook
      This hook is run by all of the above movement commands, after
      arriving at the destination.
 
  -- Function: magit-hunk-set-window-start
      This hook function ensures that the beginning of the current
      section is visible, provided it is a ‘hunk’ section.  Otherwise, it
      does nothing.
 
      Loading ‘magit-diff’ adds this function to the hook.
 
  -- Function: magit-section-set-window-start
      This hook function ensures that the beginning of the current
      section is visible, regardless of the section’s type.  If you add
      this to ‘magit-section-movement-hook’, then you must remove the
      hunk-only variant in turn.
 
  -- Function: magit-log-maybe-show-more-commits
      This hook function only has an effect in log buffers, and ‘point’
      is on the "show more" section.  If that is the case, then it
      doubles the number of commits that are being shown.
 
      Loading ‘magit-log’ adds this function to the hook.
 
  -- Function: magit-log-maybe-update-revision-buffer
      When moving inside a log buffer, then this function updates the
      revision buffer, provided it is already being displayed in another
      window of the same frame.
 
      Loading ‘magit-log’ adds this function to the hook.
 
  -- Function: magit-log-maybe-update-blob-buffer
      When moving inside a log buffer and another window of the same
      frame displays a blob buffer, then this function instead displays
      the blob buffer for the commit at point in that window.
 
  -- Function: magit-status-maybe-update-revision-buffer
      When moving inside a status buffer, then this function updates the
      revision buffer, provided it is already being displayed in another
      window of the same frame.
 
  -- Function: magit-status-maybe-update-stash-buffer
      When moving inside a status buffer, then this function updates the
      stash buffer, provided it is already being displayed in another
      window of the same frame.
 
  -- Function: magit-status-maybe-update-blob-buffer
      When moving inside a status buffer and another window of the same
      frame displays a blob buffer, then this function instead displays
      the blob buffer for the commit at point in that window.
 
  -- Function: magit-stashes-maybe-update-stash-buffer
      When moving inside a buffer listing stashes, then this function
      updates the stash buffer, provided it is already being displayed in
      another window of the same frame.
 
  -- User Option: magit-update-other-window-delay
      Delay before automatically updating the other window.
 
      When moving around in certain buffers, then certain other buffers,
      which are being displayed in another window, may optionally be
      updated to display information about the section at point.
 
      When holding down a key to move by more than just one section, then
      that would update that buffer for each section on the way.  To
      prevent that, updating the revision buffer is delayed, and this
      option controls for how long.  For optimal experience you might
      have to adjust this delay and/or the keyboard repeat rate and delay
      of your graphical environment or operating system.
 
 
 File: magit.info,  Node: Section Visibility,  Next: Section Hooks,  Prev: Section Movement,  Up: Sections
 
 4.2.2 Section Visibility
 ------------------------
 
 Magit provides many commands for changing the visibility of sections,
 but all you need to get started are the next two.
 
 ‘<TAB>’ (‘magit-section-toggle’)
      Toggle the visibility of the body of the current section.
 
 ‘C-c <TAB>’ (‘magit-section-cycle’)
 ‘C-<tab>’ (‘magit-section-cycle’)
      Cycle the visibility of current section and its children.
 
      If this command is invoked using ‘C-<tab>’ and that is globally
      bound to ‘tab-next’, then this command pivots to behave like that
      command, and you must instead use ‘C-c TAB’ to cycle section
      visibility.
 
      If you would like to keep using ‘C-<tab>’ to cycle section
      visibility but also want to use ‘tab-bar-mode’, then you have to
      prevent that mode from using this key and instead bind another key
      to ‘tab-next’.  Because ‘tab-bar-mode’ does not use a mode map but
      instead manipulates the global map, this involves advising
      ‘tab-bar--define-keys’.
 
 ‘M-<tab>’ (‘magit-section-cycle-diffs’)
      Cycle the visibility of diff-related sections in the current
      buffer.
 
 ‘S-<tab>’ (‘magit-section-cycle-global’)
      Cycle the visibility of all sections in the current buffer.
 
 ‘1’ (‘magit-section-show-level-1’)
 ‘2’ (‘magit-section-show-level-2’)
 ‘3’ (‘magit-section-show-level-3’)
 ‘4’ (‘magit-section-show-level-4’)
      Show sections surrounding the current section up to level N.
 
 ‘M-1’ (‘magit-section-show-level-1-all’)
 ‘M-2’ (‘magit-section-show-level-2-all’)
 ‘M-3’ (‘magit-section-show-level-3-all’)
 ‘M-4’ (‘magit-section-show-level-4-all’)
      Show all sections up to level N.
 
    Some functions, which are used to implement the above commands, are
 also exposed as commands themselves.  By default no keys are bound to
 these commands, as they are generally perceived to be much less useful.
 But your mileage may vary.
 
  -- Command: magit-section-show
      Show the body of the current section.
 
  -- Command: magit-section-hide
      Hide the body of the current section.
 
  -- Command: magit-section-show-headings
      Recursively show headings of children of the current section.  Only
      show the headings.  Previously shown text-only bodies are hidden.
 
  -- Command: magit-section-show-children
      Recursively show the bodies of children of the current section.
      With a prefix argument show children down to the level of the
      current section, and hide deeper children.
 
  -- Command: magit-section-hide-children
      Recursively hide the bodies of children of the current section.
 
  -- Command: magit-section-toggle-children
      Toggle visibility of bodies of children of the current section.
 
    When a buffer is first created then some sections are shown expanded
 while others are not.  This is hard coded.  When a buffer is refreshed
 then the previous visibility is preserved.  The initial visibility of
 certain sections can also be overwritten using the hook
 ‘magit-section-set-visibility-hook’.
 
  -- User Option: magit-section-initial-visibility-alist
      This options can be used to override the initial visibility of
      sections.  In the future it will also be used to define the
      defaults, but currently a section’s default is still hardcoded.
 
      The value is an alist.  Each element maps a section type or lineage
      to the initial visibility state for such sections.  The state has
      to be one of ‘show’ or ‘hide’, or a function that returns one of
      these symbols.  A function is called with the section as the only
      argument.
 
      Use the command ‘magit-describe-section-briefly’ to determine a
      section’s lineage or type.  The vector in the output is the section
      lineage and the type is the first element of that vector.
      Wildcards can be used, see ‘magit-section-match’.
 
  -- User Option: magit-section-cache-visibility
      This option controls for which sections the previous visibility
      state should be restored if a section disappears and later appears
      again.  The value is a boolean or a list of section types.  If t,
      then the visibility of all sections is cached.  Otherwise this is
      only done for sections whose type matches one of the listed types.
 
      This requires that the function ‘magit-section-cached-visibility’
      is a member of ‘magit-section-set-visibility-hook’.
 
  -- Variable: magit-section-set-visibility-hook
      This hook is run when first creating a buffer and also when
      refreshing an existing buffer, and is used to determine the
      visibility of the section currently being inserted.
 
      Each function is called with one argument, the section being
      inserted.  It should return ‘hide’ or ‘show’, or to leave the
      visibility undefined ‘nil’.  If no function decides on the
      visibility and the buffer is being refreshed, then the visibility
      is preserved; or if the buffer is being created, then the hard
      coded default is used.
 
      Usually this should only be used to set the initial visibility but
      not during refreshes.  If ‘magit-insert-section--oldroot’ is
      non-nil, then the buffer is being refreshed and these functions
      should immediately return ‘nil’.
 
  -- User Option: magit-section-visibility-indicator
      This option controls whether and how to indicate that a section can
      be expanded/collapsed.
 
      If nil, then no visibility indicators are shown.  Otherwise the
      value has to have one of these two forms:
 
         • ‘(EXPANDABLE-BITMAP . COLLAPSIBLE-BITMAP)’
 
           Both values have to be variables whose values are fringe
           bitmaps.  In this case every section that can be expanded or
           collapsed gets an indicator in the left fringe.
 
           To provide extra padding around the indicator, set
           ‘left-fringe-width’ in ‘magit-mode-hook’, e.g.:
 
                (add-hook 'magit-mode-hook (lambda ()
                                             (setq left-fringe-width 20)))
 
         • ‘(STRING . BOOLEAN)’
 
           In this case STRING (usually an ellipsis) is shown at the end
           of the heading of every collapsed section.  Expanded sections
           get no indicator.  The cdr controls whether the appearance of
           these ellipsis take section highlighting into account.  Doing
           so might potentially have an impact on performance, while not
           doing so is kinda ugly.
 
 
 File: magit.info,  Node: Section Hooks,  Next: Section Types and Values,  Prev: Section Visibility,  Up: Sections
 
 4.2.3 Section Hooks
 -------------------
 
 Which sections are inserted into certain buffers is controlled with
 hooks.  This includes the status and the refs buffers.  For other
 buffers, e.g., log and diff buffers, this is not possible.  The command
 ‘magit-describe-section’ can be used to see which hook (if any) was
 responsible for inserting the section at point.
 
    For buffers whose sections can be customized by the user, a hook
 variable called ‘magit-TYPE-sections-hook’ exists.  This hook should be
 changed using ‘magit-add-section-hook’.  Avoid using ‘add-hooks’ or the
 Custom interface.
 
    The various available section hook variables are described later in
 this manual along with the appropriate "section inserter functions".
 
  -- Function: magit-add-section-hook hook function &optional at append
           local
      Add the function FUNCTION to the value of section hook HOOK.
 
      Add FUNCTION at the beginning of the hook list unless optional
      APPEND is non-nil, in which case FUNCTION is added at the end.  If
      FUNCTION already is a member then move it to the new location.
 
      If optional AT is non-nil and a member of the hook list, then add
      FUNCTION next to that instead.  Add before or after AT, or replace
      AT with FUNCTION depending on APPEND.  If APPEND is the symbol
      ‘replace’, then replace AT with FUNCTION.  For any other non-nil
      value place FUNCTION right after AT.  If nil, then place FUNCTION
      right before AT.  If FUNCTION already is a member of the list but
      AT is not, then leave FUNCTION where ever it already is.
 
      If optional LOCAL is non-nil, then modify the hook’s buffer-local
      value rather than its global value.  This makes the hook local by
      copying the default value.  That copy is then modified.
 
      HOOK should be a symbol.  If HOOK is void, it is first set to nil.
      HOOK’s value must not be a single hook function.  FUNCTION should
      be a function that takes no arguments and inserts one or multiple
      sections at point, moving point forward.  FUNCTION may choose not
      to insert its section(s), when doing so would not make sense.  It
      should not be abused for other side-effects.
 
    To remove a function from a section hook, use ‘remove-hook’.
 
 
 File: magit.info,  Node: Section Types and Values,  Next: Section Options,  Prev: Section Hooks,  Up: Sections
 
 4.2.4 Section Types and Values
 ------------------------------
 
 Each section has a type, for example ‘hunk’, ‘file’, and ‘commit’.
 Instances of certain section types also have a value.  The value of a
 section of type ‘file’, for example, is a file name.
 
    Users usually do not have to worry about a section’s type and value,
 but knowing them can be handy at times.
 
 ‘H’ (‘magit-describe-section’)
      This command shows information about the section at point in a
      separate buffer.
 
  -- Command: magit-describe-section-briefly
      This command shows information about the section at point in the
      echo area, as ‘#<magit-section VALUE [TYPE PARENT-TYPE...]
      BEGINNING-END>’.
 
    Many commands behave differently depending on the type of the section
 at point and/or somehow consume the value of that section.  But that is
 only one of the reasons why the same key may do something different,
 depending on what section is current.
 
    Additionally for each section type a keymap *might* be defined, named
 ‘magit-TYPE-section-map’.  That keymap is used as text property keymap
 of all text belonging to any section of the respective type.  If such a
 map does not exist for a certain type, then you can define it yourself,
 and it will automatically be used.
 
 
 File: magit.info,  Node: Section Options,  Prev: Section Types and Values,  Up: Sections
 
 4.2.5 Section Options
 ---------------------
 
 This section describes options that have an effect on more than just a
 certain type of sections.  As you can see there are not many of those.
 
  -- User Option: magit-section-show-child-count
      Whether to append the number of children to section headings.  This
      only affects sections that could benefit from this information.
 
 
 File: magit.info,  Node: Transient Commands,  Next: Transient Arguments and Buffer Variables,  Prev: Sections,  Up: Interface Concepts
 
 4.3 Transient Commands
 ======================
 
 Many Magit commands are implemented as *transient* commands.  First the
 user invokes a *prefix* command, which causes its *infix* arguments and
 *suffix* commands to be displayed in the echo area.  The user then
 optionally sets some infix arguments and finally invokes one of the
 suffix commands.
 
    This is implemented in the library ‘transient’.  Earlier Magit
 releases used the package ‘magit-popup’ and even earlier versions
 library ‘magit-key-mode’.
 
    Transient is documented in *note (transient)Top::.
 
 ‘C-x M-g’ (‘magit-dispatch’)
 ‘C-c g’ (‘magit-dispatch’)
      This transient prefix command binds most of Magit’s other prefix
      commands as suffix commands and displays them in a temporary buffer
      until one of them is invoked.  Invoking such a sub-prefix causes
      the suffixes of that command to be bound and displayed instead of
      those of ‘magit-dispatch’.
 
      This command is also, or especially, useful outside Magit buffers,
      so Magit by default binds it to ‘C-c M-g’ in the global keymap.
      ‘C-c g’ would be a better binding, but we cannot use that by
      default, because that key sequence is reserved for the user.  See
      *note Global Bindings:: to learn more default and recommended key
      bindings.
 
 
 File: magit.info,  Node: Transient Arguments and Buffer Variables,  Next: Completion Confirmation and the Selection,  Prev: Transient Commands,  Up: Interface Concepts
 
 4.4 Transient Arguments and Buffer Variables
 ============================================
 
 The infix arguments of many of Magit’s transient prefix commands cease
 to have an effect once the ‘git’ command that is called with those
 arguments has returned.  Commands that create a commit are a good
 example for this.  If the user changes the arguments, then that only
 affects the next invocation of a suffix command.  If the same transient
 prefix command is later invoked again, then the arguments are initially
 reset to the default value.  This default value can be set for the
 current Emacs session or saved permanently, see *note (transient)Saving
 Values::.  It is also possible to cycle through previously used sets of
 arguments using ‘C-M-p’ and ‘C-M-n’, see *note (transient)Using
 History::.
 
    However the infix arguments of many other transient commands continue
 to have an effect even after the ‘git’ command that was called with
 those arguments has returned.  The most important commands like this are
 those that display a diff or log in a dedicated buffer.  Their arguments
 obviously continue to have an effect for as long as the respective diff
 or log is being displayed.  Furthermore the used arguments are stored in
 buffer-local variables for future reference.
 
    For commands in the second group it isn’t always desirable to reset
 their arguments to the global value when the transient prefix command is
 invoked again.
 
    As mentioned above, it is possible to cycle through previously used
 sets of arguments while a transient popup is visible.  That means that
 we could always reset the infix arguments to the default because the set
 of arguments that is active in the existing buffer is only a few ‘C-M-p’
 away.  Magit can be configured to behave like that, but because I expect
 that most users would not find that very convenient, it is not the
 default.
 
    Also note that it is possible to change the diff and log arguments
 used in the current buffer (including the status buffer, which contains
 both diff and log sections) using the respective "refresh" transient
 prefix commands on ‘D’ and ‘L’.  (‘d’ and ‘l’ on the other hand are
 intended to change *what* diff or log is being displayed.  It is
 possible to also change *how* the diff or log is being displayed at the
 same time, but if you only want to do the latter, then you should use
 the refresh variants.)  Because these secondary diff and log transient
 prefixes are about *changing* the arguments used in the current buffer,
 they *always* start out with the set of arguments that are currently in
 effect in that buffer.
 
    Some commands are usually invoked directly even though they can also
 be invoked as the suffix of a transient prefix command.  Most
 prominently ‘magit-show-commit’ is usually invoked by typing ‘RET’ while
 point is on a commit in a log, but it can also be invoked from the
 ‘magit-diff’ transient prefix.
 
    When such a command is invoked directly, then it is important to
 reuse the arguments as specified by the respective buffer-local values,
 instead of using the default arguments.  Imagine you press ‘RET’ in a
 log to display the commit at point in a different buffer and then use
 ‘D’ to change how the diff is displayed in that buffer.  And then you
 press ‘RET’ on another commit to show that instead and the diff
 arguments are reset to the default.  Not cool; so Magit does not do that
 by default.
 
  -- User Option: magit-prefix-use-buffer-arguments
      This option controls whether the infix arguments initially shown in
      certain transient prefix commands are based on the arguments that
      are currently in effect in the buffer that their suffixes update.
 
      The ‘magit-diff’ and ‘magit-log’ transient prefix commands are
      affected by this option.
 
  -- User Option: magit-direct-use-buffer-arguments
      This option controls whether certain commands, when invoked
      directly (i.e., not as the suffix of a transient prefix command),
      use the arguments that are currently active in the buffer that they
      are about to update.  The alternative is to use the default value
      for these arguments, which might change the arguments that are used
      in the buffer.
 
 Valid values for both of the above options are:
 
    • ‘always’: Always use the set of arguments that is currently active
      in the respective buffer, provided that buffer exists of course.
    • ‘selected’ or ‘t’: Use the set of arguments from the respective
      buffer, but only if it is displayed in a window of the current
      frame.  This is the default for both variables.
    • ‘current’: Use the set of arguments from the respective buffer, but
      only if it is the current buffer.
    • ‘never’: Never use the set of arguments from the respective buffer.
 
 I am afraid it gets more complicated still:
 
    • The global diff and log arguments are set for each supported mode
      individually.  The diff arguments for example have different values
      in ‘magit-diff-mode’, ‘magit-revision-mode’,
      ‘magit-merge-preview-mode’ and ‘magit-status-mode’ buffers.
      Setting or saving the value for one mode does not change the value
      for other modes.  The history however is shared.
 
    • When ‘magit-show-commit’ is invoked directly from a log buffer,
      then the file filter is picked up from that buffer, not from the
      revision buffer or the mode’s global diff arguments.
 
    • Even though they are suffixes of the diff prefix
      ‘magit-show-commit’ and ‘magit-stash-show’ do not use the diff
      buffer used by the diff commands, instead they use the dedicated
      revision and stash buffers.
 
      At the time you invoke the diff prefix it is unknown to Magit which
      of the suffix commands you are going to invoke.  While not certain,
      more often than not users invoke one of the commands that use the
      diff buffer, so the initial infix arguments are those used in that
      buffer.  However if you invoke one of these commands directly, then
      Magit knows that it should use the arguments from the revision
      resp.  stash buffer.
 
    • The log prefix also features reflog commands, but these commands do
      not use the log arguments.
 
    • If ‘magit-show-refs’ is invoked from a ‘magit-refs-mode’ buffer,
      then it acts as a refresh prefix and therefore unconditionally uses
      the buffer’s arguments as initial arguments.  If it is invoked
      elsewhere with a prefix argument, then it acts as regular prefix
      and therefore respects ‘magit-prefix-use-buffer-arguments’.  If it
      is invoked elsewhere without a prefix argument, then it acts as a
      direct command and therefore respects
      ‘magit-direct-use-buffer-arguments’.
 
 
 File: magit.info,  Node: Completion Confirmation and the Selection,  Next: Mouse Support,  Prev: Transient Arguments and Buffer Variables,  Up: Interface Concepts
 
 4.5 Completion, Confirmation and the Selection
 ==============================================
 
 * Menu:
 
 * Action Confirmation::
 * Completion and Confirmation::
 * The Selection::
 * The hunk-internal region::
 * Support for Completion Frameworks::
 * Additional Completion Options::
 
 
 File: magit.info,  Node: Action Confirmation,  Next: Completion and Confirmation,  Up: Completion Confirmation and the Selection
 
 4.5.1 Action Confirmation
 -------------------------
 
 By default many actions that could potentially lead to data loss have to
 be confirmed.  This includes many very common actions, so this can
 quickly become annoying.  Many of these actions can be undone and if you
 have thought about how to undo certain mistakes, then it should be safe
 to disable confirmation for the respective actions.
 
    The option ‘magit-no-confirm’ can be used to tell Magit to perform
 certain actions without the user having to confirm them.  Note that
 while this option can only be used to disable confirmation for a
 specific set of actions, the next section explains another way of
 telling Magit to ask fewer questions.
 
  -- User Option: magit-no-confirm
      The value of this option is a list of symbols, representing actions
      that do not have to be confirmed by the user before being carried
      out.
 
      By default many potentially dangerous commands ask the user for
      confirmation.  Each of the below symbols stands for an action
      which, when invoked unintentionally or without being fully aware of
      the consequences, could lead to tears.  In many cases there are
      several commands that perform variations of a certain action, so we
      don’t use the command names but more generic symbols.
 
         • Applying changes:
 
              • ‘discard’ Discarding one or more changes (i.e., hunks or
                the complete diff for a file) loses that change,
                obviously.
 
              • ‘reverse’ Reverting one or more changes can usually be
                undone by reverting the reversion.
 
              • ‘stage-all-changes’, ‘unstage-all-changes’ When there are
                both staged and unstaged changes, then un-/staging
                everything would destroy that distinction.  Of course
                that also applies when un-/staging a single change, but
                then less is lost and one does that so often that having
                to confirm every time would be unacceptable.
 
         • Files:
 
              • ‘delete’ When a file that isn’t yet tracked by Git is
                deleted, then it is completely lost, not just the last
                changes.  Very dangerous.
 
              • ‘trash’ Instead of deleting a file it can also be move to
                the system trash.  Obviously much less dangerous than
                deleting it.
 
                Also see option ‘magit-delete-by-moving-to-trash’.
 
              • ‘resurrect’ A deleted file can easily be resurrected by
                "deleting" the deletion, which is done using the same
                command that was used to delete the same file in the
                first place.
 
              • ‘untrack’ Untracking a file can be undone by tracking it
                again.
 
              • ‘rename’ Renaming a file can easily be undone.
 
         • Sequences:
 
              • ‘reset-bisect’ Aborting (known to Git as "resetting") a
                bisect operation loses all information collected so far.
 
              • ‘abort-cherry-pick’ Aborting a cherry-pick throws away
                all conflict resolutions which have already been carried
                out by the user.
 
              • ‘abort-revert’ Aborting a revert throws away all conflict
                resolutions which have already been carried out by the
                user.
 
              • ‘abort-rebase’ Aborting a rebase throws away all already
                modified commits, but it’s possible to restore those from
                the reflog.
 
              • ‘abort-merge’ Aborting a merge throws away all conflict
                resolutions which have already been carried out by the
                user.
 
              • ‘merge-dirty’ Merging with a dirty worktree can make it
                hard to go back to the state before the merge was
                initiated.
 
         • References:
 
              • ‘delete-unmerged-branch’ Once a branch has been deleted,
                it can only be restored using low-level recovery tools
                provided by Git.  And even then the reflog is gone.  The
                user always has to confirm the deletion of a branch by
                accepting the default choice (or selecting another
                branch), but when a branch has not been merged yet, also
                make sure the user is aware of that.
 
              • ‘delete-pr-remote’ When deleting a branch that was
                created from a pull-request and if no other branches
                still exist on that remote, then ‘magit-branch-delete’
                offers to delete the remote as well.  This should be safe
                because it only happens if no other refs exist in the
                remotes namespace, and you can recreate the remote if
                necessary.
 
              • ‘drop-stashes’ Dropping a stash is dangerous because Git
                stores stashes in the reflog.  Once a stash is removed,
                there is no going back without using low-level recovery
                tools provided by Git.  When a single stash is dropped,
                then the user always has to confirm by accepting the
                default (or selecting another).  This action only
                concerns the deletion of multiple stashes at once.
 
         • Publishing:
 
              • ‘set-and-push’ When pushing to the upstream or the
                push-remote and that isn’t actually configured yet, then
                the user can first set the target.  If s/he confirms the
                default too quickly, then s/he might end up pushing to
                the wrong branch and if the remote repository is
                configured to disallow fixing such mistakes, then that
                can be quite embarrassing and annoying.
 
         • Edit published history:
 
           Without adding these symbols here, you will be warned before
           editing commits that have already been pushed to one of the
           branches listed in ‘magit-published-branches’.
 
              • ‘amend-published’ Affects most commands that amend to
                "HEAD".
 
              • ‘rebase-published’ Affects commands that perform
                interactive rebases.  This includes commands from the
                commit transient that modify a commit other than "HEAD",
                namely the various fixup and squash variants.
 
              • ‘edit-published’ Affects the commands
                ‘magit-edit-line-commit’ and
                ‘magit-diff-edit-hunk-commit’.  These two commands make
                it quite easy to accidentally edit a published commit, so
                you should think twice before configuring them not to ask
                for confirmation.
 
           To disable confirmation completely, add all three symbols here
           or set ‘magit-published-branches’ to ‘nil’.
 
         • Various:
 
              • ‘stash-apply-3way’ When a stash cannot be applied using
                ‘git stash apply’, then Magit uses ‘git apply’ instead,
                possibly using the ‘--3way’ argument, which isn’t always
                perfectly safe.  See also ‘magit-stash-apply’.
 
              • ‘kill-process’ There seldom is a reason to kill a
                process.
 
         • Global settings:
 
           Instead of adding all of the above symbols to the value of
           this option, you can also set it to the atom ‘t’, which has
           the same effect as adding all of the above symbols.  Doing
           that most certainly is a bad idea, especially because other
           symbols might be added in the future.  So even if you don’t
           want to be asked for confirmation for any of these actions,
           you are still better of adding all of the respective symbols
           individually.
 
           When ‘magit-wip-before-change-mode’ is enabled, then the
           following actions can be undone fairly easily: ‘discard’,
           ‘reverse’, ‘stage-all-changes’, and ‘unstage-all-changes’.  If
           and only if this mode is enabled, then ‘safe-with-wip’ has the
           same effect as adding all of these symbols individually.
 
 
 File: magit.info,  Node: Completion and Confirmation,  Next: The Selection,  Prev: Action Confirmation,  Up: Completion Confirmation and the Selection
 
 4.5.2 Completion and Confirmation
 ---------------------------------
 
 Many Magit commands ask the user to select from a list of possible
 things to act on, while offering the most likely choice as the default.
 For many of these commands the default is the thing at point, provided
 that it actually is a valid thing to act on.  For many commands that act
 on a branch, the current branch serves as the default if there is no
 branch at point.
 
    These commands combine asking for confirmation and asking for a
 target to act on into a single action.  The user can confirm the default
 target using ‘RET’ or abort using ‘C-g’.  This is similar to a
 ‘y-or-n-p’ prompt, but the keys to confirm or abort differ.
 
    At the same time the user is also given the opportunity to select
 another target, which is useful because for some commands and/or in some
 situations you might want to select the action before selecting the
 target by moving to it.
 
    However you might find that for some commands you always want to use
 the default target, if any, or even that you want the command to act on
 the default without requiring any confirmation at all.  The option
 ‘magit-dwim-selection’ can be used to configure certain commands to that
 effect.
 
    Note that when the region is active then many commands act on the
 things that are selected using a mechanism based on the region, in many
 cases after asking for confirmation.  This region-based mechanism is
 called the "selection" and is described in detail in the next section.
 When a selection exists that is valid for the invoked command, then that
 command never offers to act on something else, and whether it asks for
 confirmation is not controlled by this option.
 
    Also note that Magit asks for confirmation of certain actions that
 are not coupled with completion (or the selection).  Such dialogs are
 also not affected by this option and are described in the previous
 section.
 
  -- User Option: magit-dwim-selection
    This option can be used to tell certain commands to use the thing at
 point instead of asking the user to select a candidate to act on, with
 or without confirmation.
 
    The value has the form ‘((COMMAND nil|PROMPT DEFAULT)...)’.
 
    • COMMAND is the command that should not prompt for a choice.  To
      have an effect, the command has to use the function
      ‘magit-completing-read’ or a utility function which in turn uses
      that function.
 
    • If the command uses ‘magit-completing-read’ multiple times, then
      PROMPT can be used to only affect one of these uses.  PROMPT, if
      non-nil, is a regular expression that is used to match against the
      PROMPT argument passed to ‘magit-completing-read’.
 
    • DEFAULT specifies how to use the default.  If it is ‘t’, then the
      DEFAULT argument passed to ‘magit-completing-read’ is used without
      confirmation.  If it is ‘ask’, then the user is given a chance to
      abort.  DEFAULT can also be ‘nil’, in which case the entry has no
      effect.
 
 
 File: magit.info,  Node: The Selection,  Next: The hunk-internal region,  Prev: Completion and Confirmation,  Up: Completion Confirmation and the Selection
 
 4.5.3 The Selection
 -------------------
 
 If the region is active, then many Magit commands act on the things that
 are selected using a mechanism based on the region instead of one single
 thing.  When the region is not active, then these commands act on the
 thing at point or read a single thing to act on.  This is described in
 the previous section — this section only covers how multiple things are
 selected, how that is visualized, and how certain commands behave when
 that is the case.
 
    Magit’s mechanism for selecting multiple things, or rather sections
 that represent these things, is based on the Emacs region, but the area
 that Magit considers to be selected is typically larger than the region
 and additional restrictions apply.
 
    Magit makes a distinction between a region that qualifies as forming
 a valid Magit selection and a region that does not.  If the region does
 not qualify, then it is displayed as it is in other Emacs buffers.  If
 the region does qualify as a Magit selection, then the selection is
 always visualized, while the region itself is only visualized if it
 begins and ends on the same line.
 
    For a region to qualify as a Magit selection, it must begin in the
 heading of one section and end in the heading of a sibling section.
 Note that if the end of the region is at the very beginning of section
 heading (i.e., at the very beginning of a line) then that section is
 considered to be *inside* the selection.
 
    This is not consistent with how the region is normally treated in
 Emacs — if the region ends at the beginning of a line, then that line is
 outside the region.  Due to how Magit visualizes the selection, it
 should be obvious that this difference exists.
 
    Not every command acts on every valid selection.  Some commands do
 not even consider the location of point, others may act on the section
 at point but not support acting on the selection, and even commands that
 do support the selection of course only do so if it selects things that
 they can act on.
 
    This is the main reason why the selection must include the section at
 point.  Even if a selection exists, the invoked command may disregard
 it, in which case it may act on the current section only.  It is much
 safer to only act on the current section but not the other selected
 sections than it is to act on the current section *instead* of the
 selected sections.  The latter would be much more surprising and if the
 current section always is part of the selection, then that cannot
 happen.
 
  -- Variable: magit-keep-region-overlay
      This variable controls whether the region is visualized as usual
      even when a valid Magit selection or a hunk-internal region exists.
      See the doc-string for more information.
 
 
 File: magit.info,  Node: The hunk-internal region,  Next: Support for Completion Frameworks,  Prev: The Selection,  Up: Completion Confirmation and the Selection
 
 4.5.4 The hunk-internal region
 ------------------------------
 
 Somewhat related to the Magit selection described in the previous
 section is the hunk-internal region.
 
    Like the selection, the hunk-internal region is based on the Emacs
 region but causes that region to not be visualized as it would in other
 Emacs buffers, and includes the line on which the region ends even if it
 ends at the very beginning of that line.
 
    Unlike the selection, which is based on a region that must begin in
 the heading of one section and ends in the section of a sibling section,
 the hunk-internal region must begin inside the *body* of a hunk section
 and end in the body of the *same* section.
 
    The hunk-internal region is honored by "apply" commands, which can,
 among other targets, act on a hunk.  If the hunk-internal region is
 active, then such commands act only on the marked part of the hunk
 instead of on the complete hunk.
 
 
 File: magit.info,  Node: Support for Completion Frameworks,  Next: Additional Completion Options,  Prev: The hunk-internal region,  Up: Completion Confirmation and the Selection
 
 4.5.5 Support for Completion Frameworks
 ---------------------------------------
 
 The built-in option ‘completing-read-function’ specifies the low-level
 function used by ‘completing-read’ to ask a user to select from a list
 of choices.  Its default value is ‘completing-read-default’.
 Alternative completion frameworks typically activate themselves by
 substituting their own implementation.
 
    Mostly for historic reasons Magit provides a similar option named
 ‘magit-completing-read-function’, which only controls the low-level
 function used by ‘magit-completing-read’.  This option also makes it
 possible to use a different completing mechanism for Magit than for the
 rest of Emacs, but doing that is not recommend.
 
    You most likely don’t have to customize the magit-specific option to
 use an alternative completion framework.  For example, if you enable
 ‘ivy-mode’, then Magit will respect that, and if you enable ‘helm-mode’,
 then you are done too.
 
    However if you want to use Ido, then ‘ido-mode’ won’t do the trick.
 You will also have to install the ‘ido-completing-read+’ package and use
 ‘magit-ido-completing-read’ as ‘magit-completing-read-function’.
 
  -- User Option: magit-completing-read-function
      The value of this variable is the low-level function used to
      perform completion by code that uses ‘magit-completing-read’ (as
      opposed to the built-in ‘completing-read’).
 
      The default value, ‘magit-builtin-completing-read’, is suitable for
      the standard completion mechanism, ‘ivy-mode’, and ‘helm-mode’ at
      least.
 
      The built-in ‘completing-read’ and ‘completing-read-default’ are
      *not* suitable to be used here.  ‘magit-builtin-completing-read’
      performs some additional work, and any function used in its place
      has to do the same.
 
  -- Function: magit-builtin-completing-read prompt choices &optional
           predicate require-match initial-input hist def
      This function performs completion using the built-in
      ‘completing-read’ and does some additional magit-specific work.
 
  -- Function: magit-ido-completing-read prompt choices &optional
           predicate require-match initial-input hist def
      This function performs completion using ‘ido-completing-read+’ from
      the package by the same name (which you have to explicitly install)
      and does some additional magit-specific work.
 
      We have to use ‘ido-completing-read+’ instead of the
      ‘ido-completing-read’ that comes with Ido itself, because the
      latter, while intended as a drop-in replacement, cannot serve that
      purpose because it violates too many of the implicit conventions.
 
  -- Function: magit-completing-read prompt choices &optional predicate
           require-match initial-input hist def fallback
      This is the function that Magit commands use when they need the
      user to select a single thing to act on.  The arguments have the
      same meaning as for ‘completing-read’, except for FALLBACK, which
      is unique to this function and is described below.
 
      Instead of asking the user to choose from a list of possible
      candidates, this function may just return the default specified by
      DEF, with or without requiring user confirmation.  Whether that is
      the case depends on PROMPT, ‘this-command’ and
      ‘magit-dwim-selection’.  See the documentation of the latter for
      more information.
 
      If it does read a value in the minibuffer, then this function acts
      similar to ‘completing-read’, except for the following:
 
         • COLLECTION must be a list of choices.  A function is not
           supported.
 
         • If REQUIRE-MATCH is ‘nil’ and the user exits without a choice,
           then ‘nil’ is returned instead of an empty string.
 
         • If REQUIRE-MATCH is non-nil and the users exits without a
           choice, an user-error is raised.
 
         • FALLBACK specifies a secondary default that is only used if
           the primary default DEF is ‘nil’.  The secondary default is
           not subject to ‘magit-dwim-selection’ — if DEF is ‘nil’ but
           FALLBACK is not, then this function always asks the user to
           choose a candidate, just as if both defaults were ‘nil’.
 
         • ": " is appended to PROMPT.
 
         • PROMPT is modified to end with \" (default DEF|FALLBACK): \"
           provided that DEF or FALLBACK is non-nil, that neither
           ‘ivy-mode’ nor ‘helm-mode’ is enabled, and that
           ‘magit-completing-read-function’ is set to its default value
           of ‘magit-builtin-completing-read’.
 
 
 File: magit.info,  Node: Additional Completion Options,  Prev: Support for Completion Frameworks,  Up: Completion Confirmation and the Selection
 
 4.5.6 Additional Completion Options
 -----------------------------------
 
  -- User Option: magit-list-refs-sortby
      For many commands that read a ref or refs from the user, the value
      of this option can be used to control the order of the refs.  Valid
      values include any key accepted by the ‘--sort’ flag of ‘git
      for-each-ref’.  By default, refs are sorted alphabetically by their
      full name (e.g., "refs/heads/master").
 
 
 File: magit.info,  Node: Mouse Support,  Next: Running Git,  Prev: Completion Confirmation and the Selection,  Up: Interface Concepts
 
 4.6 Mouse Support
 =================
 
 Double clicking on a section heading toggles the visibility of its body,
 if any.  Likewise clicking in the left fringe toggles the visibility of
 the appropriate section.
 
    A context menu is provided but has to be enabled explicitly.  In
 Emacs 28 and greater, enable the global mode ‘context-menu-mode’.  If
 you use an older Emacs release, set
 ‘magit-section-show-context-menu-for-emacs<28’.
 
 
 File: magit.info,  Node: Running Git,  Prev: Mouse Support,  Up: Interface Concepts
 
 4.7 Running Git
 ===============
 
 * Menu:
 
 * Viewing Git Output::
 * Git Process Status::
 * Running Git Manually::
 * Git Executable::
 * Global Git Arguments::
 
 
 File: magit.info,  Node: Viewing Git Output,  Next: Git Process Status,  Up: Running Git
 
 4.7.1 Viewing Git Output
 ------------------------
 
 Magit runs Git either for side-effects (e.g., when pushing) or to get
 some value (e.g., the name of the current branch).
 
    When Git is run for side-effects, the process output is logged in a
 per-repository log buffer, which can be consulted using the
 ‘magit-process’ command when things don’t go as expected.
 
    The output/errors for up to ‘magit-process-log-max’ Git commands are
 retained.
 
 ‘$’ (‘magit-process’)
      This commands displays the process buffer for the current
      repository.
 
    Inside that buffer, the usual key bindings for navigating and showing
 sections are available.  There is one additional command.
 
 ‘k’ (‘magit-process-kill’)
      This command kills the process represented by the section at point.
 
  -- Variable: magit-git-debug
      This option controls whether additional reporting of git errors is
      enabled.
 
      Magit basically calls git for one of these two reasons: for
      side-effects or to do something with its standard output.
 
      When git is run for side-effects then its output, including error
      messages, go into the process buffer which is shown when using ‘$’.
 
      When git’s output is consumed in some way, then it would be too
      expensive to also insert it into this buffer, but when this option
      is non-nil and git returns with a non-zero exit status, then at
      least its standard error is inserted into this buffer.
 
      This is only intended for debugging purposes.  Do not enable this
      permanently, that would negatively affect performance.
 
      This is only intended for debugging purposes.  Do not enable this
      permanently, that would negatively affect performance.  Also note
      that just because git exits with a non-zero exit status and prints
      an error message that usually doesn’t mean that it is an error as
      far as Magit is concerned, which is another reason we usually hide
      these error messages.  Whether some error message is relevant in
      the context of some unexpected behavior has to be judged on a case
      by case basis.
 
      The command ‘magit-toggle-git-debug’ changes the value of this
      variable.
 
  -- Variable: magit-process-extreme-logging
      This option controls whether ‘magit-process-file’ logs to the
      ‘*Messages*’ buffer.
 
      Only intended for temporary use when you try to figure out how
      Magit uses Git behind the scene.  Output that normally goes to the
      magit-process buffer continues to go there.  Not all output goes to
      either of these two buffers.
 
 
 File: magit.info,  Node: Git Process Status,  Next: Running Git Manually,  Prev: Viewing Git Output,  Up: Running Git
 
 4.7.2 Git Process Status
 ------------------------
 
 When a Git process is running for side-effects, Magit displays an
 indicator in the mode line, using the ‘magit-mode-line-process’ face.
 
    If the Git process exits successfully, the process indicator is
 removed from the mode line immediately.
 
    In the case of a Git error, the process indicator is not removed, but
 is instead highlighted with the ‘magit-mode-line-process-error’ face,
 and the error details from the process buffer are provided as a tooltip
 for mouse users.  This error indicator persists in the mode line until
 the next magit buffer refresh.
 
    If you do not wish process errors to be indicated in the mode line,
 customize the ‘magit-process-display-mode-line-error’ user option.
 
    Process errors are additionally indicated at the top of the status
 buffer.
 
 
 File: magit.info,  Node: Running Git Manually,  Next: Git Executable,  Prev: Git Process Status,  Up: Running Git
 
 4.7.3 Running Git Manually
 --------------------------
 
 While Magit provides many Emacs commands to interact with Git, it does
 not cover everything.  In those cases your existing Git knowledge will
 come in handy.  Magit provides some commands for running arbitrary Git
 commands by typing them into the minibuffer, instead of having to switch
 to a shell.
 
 ‘!’ (‘magit-run’)
      This transient prefix command binds the following suffix commands
      and displays them in a temporary buffer until a suffix is invoked.
 
 ‘! !’ (‘magit-git-command-topdir’)
      This command reads a command from the user and executes it in the
      top-level directory of the current working tree.
 
      The string "git " is used as initial input when prompting the user
      for the command.  It can be removed to run another command.
 
 ‘:’ (‘magit-git-command’)
 ‘! p’
      This command reads a command from the user and executes it in
      ‘default-directory’.  With a prefix argument the command is
      executed in the top-level directory of the current working tree
      instead.
 
      The string "git " is used as initial input when prompting the user
      for the command.  It can be removed to run another command.
 
 ‘! s’ (‘magit-shell-command-topdir’)
      This command reads a command from the user and executes it in the
      top-level directory of the current working tree.
 
 ‘! S’ (‘magit-shell-command’)
      This command reads a command from the user and executes it in
      ‘default-directory’.  With a prefix argument the command is
      executed in the top-level directory of the current working tree
      instead.
 
  -- User Option: magit-shell-command-verbose-prompt
      Whether the prompt, used by the above commands when reading a shell
      command, shows the directory in which it will be run.
 
    These suffix commands start external gui tools.
 
 ‘! k’ (‘magit-run-gitk’)
      This command runs ‘gitk’ in the current repository.
 
 ‘! a’ (‘magit-run-gitk-all’)
      This command runs ‘gitk --all’ in the current repository.
 
 ‘! b’ (‘magit-run-gitk-branches’)
      This command runs ‘gitk --branches’ in the current repository.
 
 ‘! g’ (‘magit-run-git-gui’)
      This command runs ‘git gui’ in the current repository.
 
 ‘! m’ (‘magit-git-mergetool’)
      This command runs ‘git mergetool --gui’ in the current repository.
 
      With a prefix argument this acts as a transient prefix command,
      allowing the user to select the mergetool and change some settings.
 
 
 File: magit.info,  Node: Git Executable,  Next: Global Git Arguments,  Prev: Running Git Manually,  Up: Running Git
 
 4.7.4 Git Executable
 --------------------
 
 When Magit calls Git, then it may do so using the absolute path to the
 ‘git’ executable, or using just its name.
 
    When running ‘git’ locally and the ‘system-type’ is ‘windows-nt’ (any
 Windows version) or ‘darwin’ (macOS) then ‘magit-git-executable’ is set
 to an absolute path when Magit is loaded.
 
    On Windows it is necessary to use an absolute path because Git comes
 with several wrapper scripts for the actual ‘git’ binary, which are also
 placed on ‘$PATH’, and using one of these wrappers instead of the binary
 would degrade performance horribly.  For some macOS users using just the
 name of the executable also performs horribly, so we avoid doing that on
 that platform as well.  On other platforms, using just the name seems to
 work just fine.
 
    Using an absolute path when running ‘git’ on a remote machine over
 Tramp, would be problematic to use an absolute path that is suitable on
 the local machine, so a separate option is used to control the name or
 path that is used on remote machines.
 
  -- User Option: magit-git-executable
      The ‘git’ executable used by Magit on the local host.  This should
      be either the absolute path to the executable, or the string "git"
      to let Emacs find the executable itself, using the standard
      mechanism for doing such things.
 
  -- User Option: magit-remote-git-executable
      The ‘git’ executable used by Magit on remote machines over Tramp.
      Normally this should be just the string "git".  Consider
      customizing ‘tramp-remote-path’ instead of this option.
 
    If Emacs is unable to find the correct executable, then you can work
 around that by explicitly setting the value of one of these two options.
 Doing that should be considered a kludge; it is better to make sure that
 the order in ‘exec-path’ or ‘tramp-remote-path’ is correct.
 
    Note that ‘exec-path’ is set based on the value of the ‘PATH’
 environment variable that is in effect when Emacs is started.  If you
 set ‘PATH’ in your shell’s init files, then that only has an effect on
 Emacs if you start it from that shell (because the environment of a
 process is only passed to its child processes, not to arbitrary other
 processes).  If that is not how you start Emacs, then the
 ‘exec-path-from-shell’ package can help; though honestly I consider that
 a kludge too.
 
    The command ‘magit-debug-git-executable’ can be useful to find out
 where Emacs is searching for ‘git’.
 
 ‘M-x magit-debug-git-executable’
      This command displays a buffer with information about
      ‘magit-git-executable’ and ‘magit-remote-git-executable’.
 
 ‘M-x magit-version’
      This command shows the currently used versions of Magit, Git, and
      Emacs in the echo area.  Non-interactively this just returns the
      Magit version.
 
 
 File: magit.info,  Node: Global Git Arguments,  Prev: Git Executable,  Up: Running Git
 
 4.7.5 Global Git Arguments
 --------------------------
 
  -- User Option: magit-git-global-arguments
      The arguments set here are used every time the git executable is
      run as a subprocess.  They are placed right after the executable
      itself and before the git command - as in ‘git HERE... COMMAND
      REST’.  For valid arguments see *note (gitman)git::.
 
      Be careful what you add here, especially if you are using Tramp to
      connect to servers with ancient Git versions.  Never remove
      anything that is part of the default value, unless you really know
      what you are doing.  And think very hard before adding something;
      it will be used every time Magit runs Git for any purpose.
 
 
 File: magit.info,  Node: Inspecting,  Next: Manipulating,  Prev: Interface Concepts,  Up: Top
 
 5 Inspecting
 ************
 
 The functionality provided by Magit can be roughly divided into three
 groups: inspecting existing data, manipulating existing data or adding
 new data, and transferring data.  Of course that is a rather crude
 distinction that often falls short, but it’s more useful than no
 distinction at all.  This section is concerned with inspecting data, the
 next two with manipulating and transferring it.  Then follows a section
 about miscellaneous functionality, which cannot easily be fit into this
 distinction.
 
    Of course other distinctions make sense too, e.g., Git’s distinction
 between porcelain and plumbing commands, which for the most part is
 equivalent to Emacs’ distinction between interactive commands and
 non-interactive functions.  All of the sections mentioned before are
 mainly concerned with the porcelain – Magit’s plumbing layer is
 described later.
 
 * Menu:
 
 * Status Buffer::
 * Repository List::
 * Logging::
 * Diffing::
 * Ediffing::
 * References Buffer::
 * Bisecting::
 * Visiting Files and Blobs::
 * Blaming::
 
 
 File: magit.info,  Node: Status Buffer,  Next: Repository List,  Up: Inspecting
 
 5.1 Status Buffer
 =================
 
 While other Magit buffers contain, e.g., one particular diff or one
 particular log, the status buffer contains the diffs for staged and
 unstaged changes, logs for unpushed and unpulled commits, lists of
 stashes and untracked files, and information related to the current
 branch.
 
    During certain incomplete operations – for example when a merge
 resulted in a conflict – additional information is displayed that helps
 proceeding with or aborting the operation.
 
    The command ‘magit-status’ displays the status buffer belonging to
 the current repository in another window.  This command is used so often
 that it should be bound globally.  We recommend using ‘C-x g’:
 
      (global-set-key (kbd "C-x g") 'magit-status)
 
 ‘C-x g’ (‘magit-status’)
      When invoked from within an existing Git repository, then this
      command shows the status of that repository in a buffer.
 
      If the current directory isn’t located within a Git repository,
      then this command prompts for an existing repository or an
      arbitrary directory, depending on the option
      ‘magit-repository-directories’, and the status for the selected
      repository is shown instead.
 
         • If that option specifies any existing repositories, then the
           user is asked to select one of them.
 
         • Otherwise the user is asked to select an arbitrary directory
           using regular file-name completion.  If the selected directory
           is the top-level directory of an existing working tree, then
           the status buffer for that is shown.
 
         • Otherwise the user is offered to initialize the selected
           directory as a new repository.  After creating the repository
           its status buffer is shown.
 
      These fallback behaviors can also be forced using one or more
      prefix arguments:
 
         • With two prefix arguments (or more precisely a numeric prefix
           value of 16 or greater) an arbitrary directory is read, which
           is then acted on as described above.  The same could be
           accomplished using the command ‘magit-init’.
 
         • With a single prefix argument an existing repository is read
           from the user, or if no repository can be found based on the
           value of ‘magit-repository-directories’, then the behavior is
           the same as with two prefix arguments.
 
  -- User Option: magit-repository-directories
      List of directories that are Git repositories or contain Git
      repositories.
 
      Each element has the form ‘(DIRECTORY . DEPTH)’.  DIRECTORY has to
      be a directory or a directory file-name, a string.  DEPTH, an
      integer, specifies the maximum depth to look for Git repositories.
      If it is 0, then only add DIRECTORY itself.
 
      This option controls which repositories are being listed by
      ‘magit-list-repositories’.  It also affects ‘magit-status’ (which
      see) in potentially surprising ways (see above).
 
  -- Command: magit-status-quick
      This command is an alternative to ‘magit-status’ that usually
      avoids refreshing the status buffer.
 
      If the status buffer of the current Git repository exists but isn’t
      being displayed in the selected frame, then it is displayed without
      being refreshed.
 
      If the status buffer is being displayed in the selected frame, then
      this command refreshes it.
 
      Prefix arguments have the same meaning as for ‘magit-status’, and
      additionally cause the buffer to be refresh.
 
      To use this command add this to your init file:
 
           (global-set-key (kbd "C-x g") 'magit-status-quick).
 
      If you do that and then for once want to redisplay the buffer and
      also immediately refresh it, then type ‘C-x g’ followed by ‘g’.
 
      A possible alternative command is
      ‘magit-display-repository-buffer’.  It supports displaying any
      existing Magit buffer that belongs to the current repository; not
      just the status buffer.
 
  -- Command: ido-enter-magit-status
      From an Ido prompt used to open a file, instead drop into
      ‘magit-status’.  This is similar to ‘ido-magic-delete-char’, which,
      despite its name, usually causes a Dired buffer to be created.
 
      To make this command available, use something like:
 
           (add-hook 'ido-setup-hook
                     (lambda ()
                       (define-key ido-completion-map
                         (kbd \"C-x g\") 'ido-enter-magit-status)))
 
      Starting with Emacs 25.1 the Ido keymaps are defined just once
      instead of every time Ido is invoked, so now you can modify it like
      pretty much every other keymap:
 
           (define-key ido-common-completion-map
             (kbd \"C-x g\") 'ido-enter-magit-status)
 
 * Menu:
 
 * Status Sections::
 * Status Header Sections::
 * Status Module Sections::
 * Status Options::
 
 
 File: magit.info,  Node: Status Sections,  Next: Status Header Sections,  Up: Status Buffer
 
 5.1.1 Status Sections
 ---------------------
 
 The contents of status buffers is controlled using the hook
 ‘magit-status-sections-hook’.  See *note Section Hooks:: to learn about
 such hooks and how to customize them.
 
  -- User Option: magit-status-sections-hook
      Hook run to insert sections into a status buffer.
 
    The first function on that hook by default is
 ‘magit-insert-status-headers’; it is described in the next section.  By
 default the following functions are also members of that hook:
 
  -- Function: magit-insert-merge-log
      Insert section for the on-going merge.  Display the heads that are
      being merged.  If no merge is in progress, do nothing.
 
  -- Function: magit-insert-rebase-sequence
      Insert section for the on-going rebase sequence.  If no such
      sequence is in progress, do nothing.
 
  -- Function: magit-insert-am-sequence
      Insert section for the on-going patch applying sequence.  If no
      such sequence is in progress, do nothing.
 
  -- Function: magit-insert-sequencer-sequence
      Insert section for the on-going cherry-pick or revert sequence.  If
      no such sequence is in progress, do nothing.
 
  -- Function: magit-insert-bisect-output
      While bisecting, insert section with output from ‘git bisect’.
 
  -- Function: magit-insert-bisect-rest
      While bisecting, insert section visualizing the bisect state.
 
  -- Function: magit-insert-bisect-log
      While bisecting, insert section logging bisect progress.
 
  -- Function: magit-insert-untracked-files
      Maybe insert a list or tree of untracked files.
 
      Do so depending on the value of ‘status.showUntrackedFiles’.  Note
      that even if the value is ‘all’, Magit still initially only shows
      directories.  But the directory sections can then be expanded using
      ‘TAB’.
 
  -- Function: magit-insert-unstaged-changes
      Insert section showing unstaged changes.
 
  -- Function: magit-insert-staged-changes
      Insert section showing staged changes.
 
  -- Function: magit-insert-stashes &optional ref heading
      Insert the ‘stashes’ section showing reflog for "refs/stash".  If
      optional REF is non-nil show reflog for that instead.  If optional
      HEADING is non-nil use that as section heading instead of
      "Stashes:".
 
  -- Function: magit-insert-unpulled-from-upstream
      Insert section showing commits that haven’t been pulled from the
      upstream branch yet.
 
  -- Function: magit-insert-unpulled-from-pushremote
      Insert section showing commits that haven’t been pulled from the
      push-remote branch yet.
 
  -- Function: magit-insert-unpushed-to-upstream
      Insert section showing commits that haven’t been pushed to the
      upstream yet.
 
  -- Function: magit-insert-unpushed-to-pushremote
      Insert section showing commits that haven’t been pushed to the
      push-remote yet.
 
    The following functions can also be added to the above hook:
 
  -- Function: magit-insert-tracked-files
      Insert a tree of tracked files.
 
  -- Function: magit-insert-ignored-files
      Insert a tree of ignored files.  Its possible to limit the logs in
      the current buffer to a certain directory using ‘D = f <DIRECTORY>
      RET g’.  If you do that, then that that also affects this command.
 
      The log filter can be used to limit to multiple files.  In that
      case this function only respects the first of the files and only if
      it is a directory.
 
  -- Function: magit-insert-skip-worktree-files
      Insert a tree of skip-worktree files.  If the first element of
      ‘magit-buffer-diff-files’ is a directory, then limit the list to
      files below that.  The value of that variable can be set using ‘D
      -- DIRECTORY RET g’.
 
  -- Function: magit-insert-assumed-unchanged-files
      Insert a tree of files that are assumed to be unchanged.  If the
      first element of ‘magit-buffer-diff-files’ is a directory, then
      limit the list to files below that.  The value of that variable can
      be set using ‘D -- DIRECTORY RET g’.
 
  -- Function: magit-insert-unpulled-or-recent-commits
      Insert section showing unpulled or recent commits.  If an upstream
      is configured for the current branch and it is ahead of the current
      branch, then show the missing commits.  Otherwise, show the last
      ‘magit-log-section-commit-count’ commits.
 
  -- Function: magit-insert-recent-commits
      Insert section showing the last ‘magit-log-section-commit-count’
      commits.
 
  -- User Option: magit-log-section-commit-count
      How many recent commits ‘magit-insert-recent-commits’ and
      ‘magit-insert-unpulled-or-recent-commits’ (provided there are no
      unpulled commits) show.
 
  -- Function: magit-insert-unpulled-cherries
      Insert section showing unpulled commits.  Like
      ‘magit-insert-unpulled-commits’ but prefix each commit that has not
      been applied yet (i.e., a commit with a patch-id not shared with
      any local commit) with "+", and all others with "-".
 
  -- Function: magit-insert-unpushed-cherries
      Insert section showing unpushed commits.  Like
      ‘magit-insert-unpushed-commits’ but prefix each commit which has
      not been applied to upstream yet (i.e., a commit with a patch-id
      not shared with any upstream commit) with "+" and all others with
      "-".
 
    See *note References Buffer:: for some more section inserters, which
 could be used here.
 
 
 File: magit.info,  Node: Status Header Sections,  Next: Status Module Sections,  Prev: Status Sections,  Up: Status Buffer
 
 5.1.2 Status Header Sections
 ----------------------------
 
 The contents of status buffers is controlled using the hook
 ‘magit-status-sections-hook’ (see *note Status Sections::).
 
    By default ‘magit-insert-status-headers’ is the first member of that
 hook variable.
 
  -- Function: magit-insert-status-headers
      Insert headers sections appropriate for ‘magit-status-mode’
      buffers.  The sections are inserted by running the functions on the
      hook ‘magit-status-headers-hook’.
 
  -- User Option: magit-status-headers-hook
      Hook run to insert headers sections into the status buffer.
 
      This hook is run by ‘magit-insert-status-headers’, which in turn
      has to be a member of ‘magit-status-sections-hook’ to be used at
      all.
 
    By default the following functions are members of the above hook:
 
  -- Function: magit-insert-error-header
      Insert a header line showing the message about the Git error that
      just occurred.
 
      This function is only aware of the last error that occur when Git
      was run for side-effects.  If, for example, an error occurs while
      generating a diff, then that error won’t be inserted.  Refreshing
      the status buffer causes this section to disappear again.
 
  -- Function: magit-insert-diff-filter-header
      Insert a header line showing the effective diff filters.
 
  -- Function: magit-insert-head-branch-header
      Insert a header line about the current branch or detached ‘HEAD’.
 
  -- Function: magit-insert-upstream-branch-header
      Insert a header line about the branch that is usually pulled into
      the current branch.
 
  -- Function: magit-insert-push-branch-header
      Insert a header line about the branch that the current branch is
      usually pushed to.
 
  -- Function: magit-insert-tags-header
      Insert a header line about the current and/or next tag, along with
      the number of commits between the tag and ‘HEAD’.
 
    The following functions can also be added to the above hook:
 
  -- Function: magit-insert-repo-header
      Insert a header line showing the path to the repository top-level.
 
  -- Function: magit-insert-remote-header
      Insert a header line about the remote of the current branch.
 
      If no remote is configured for the current branch, then fall back
      showing the "origin" remote, or if that does not exist the first
      remote in alphabetic order.
 
  -- Function: magit-insert-user-header
      Insert a header line about the current user.
 
 
 File: magit.info,  Node: Status Module Sections,  Next: Status Options,  Prev: Status Header Sections,  Up: Status Buffer
 
 5.1.3 Status Module Sections
 ----------------------------
 
 The contents of status buffers is controlled using the hook
 ‘magit-status-sections-hook’ (see *note Status Sections::).
 
    By default ‘magit-insert-modules’ is _not_ a member of that hook
 variable.
 
  -- Function: magit-insert-modules
      Insert submodule sections.
 
      Hook ‘magit-module-sections-hook’ controls which module sections
      are inserted, and option ‘magit-module-sections-nested’ controls
      whether they are wrapped in an additional section.
 
  -- User Option: magit-module-sections-hook
      Hook run by ‘magit-insert-modules’.
 
  -- User Option: magit-module-sections-nested
      This option controls whether ‘magit-insert-modules’ wraps inserted
      sections in an additional section.
 
      If this is non-nil, then only a single top-level section is
      inserted.  If it is nil, then all sections listed in
      ‘magit-module-sections-hook’ become top-level sections.
 
  -- Function: magit-insert-modules-overview
      Insert sections for all submodules.  For each section insert the
      path, the branch, and the output of ‘git describe --tags’, or,
      failing that, the abbreviated HEAD commit hash.
 
      Press ‘RET’ on such a submodule section to show its own status
      buffer.  Press ‘RET’ on the "Modules" section to display a list of
      submodules in a separate buffer.  This shows additional information
      not displayed in the super-repository’s status buffer.
 
  -- Function: magit-insert-modules-unpulled-from-upstream
      Insert sections for modules that haven’t been pulled from the
      upstream yet.  These sections can be expanded to show the
      respective commits.
 
  -- Function: magit-insert-modules-unpulled-from-pushremote
      Insert sections for modules that haven’t been pulled from the
      push-remote yet.  These sections can be expanded to show the
      respective commits.
 
  -- Function: magit-insert-modules-unpushed-to-upstream
      Insert sections for modules that haven’t been pushed to the
      upstream yet.  These sections can be expanded to show the
      respective commits.
 
  -- Function: magit-insert-modules-unpushed-to-pushremote
      Insert sections for modules that haven’t been pushed to the
      push-remote yet.  These sections can be expanded to show the
      respective commits.
 
 
 File: magit.info,  Node: Status Options,  Prev: Status Module Sections,  Up: Status Buffer
 
 5.1.4 Status Options
 --------------------
 
  -- User Option: magit-status-margin
      This option specifies whether the margin is initially shown in
      Magit-Status mode buffers and how it is formatted.
 
      The value has the form ‘(INIT STYLE WIDTH AUTHOR AUTHOR-WIDTH)’.
 
         • If INIT is non-nil, then the margin is shown initially.
         • STYLE controls how to format the author or committer date.  It
           can be one of ‘age’ (to show the age of the commit),
           ‘age-abbreviated’ (to abbreviate the time unit to a
           character), or a string (suitable for ‘format-time-string’) to
           show the actual date.  Option
           ‘magit-log-margin-show-committer-date’ controls which date is
           being displayed.
         • WIDTH controls the width of the margin.  This exists for
           forward compatibility and currently the value should not be
           changed.
         • AUTHOR controls whether the name of the author is also shown
           by default.
         • AUTHOR-WIDTH has to be an integer.  When the name of the
           author is shown, then this specifies how much space is used to
           do so.
 
    Also see the proceeding section for more options concerning status
 buffers.
 
 
 File: magit.info,  Node: Repository List,  Next: Logging,  Prev: Status Buffer,  Up: Inspecting
 
 5.2 Repository List
 ===================
 
  -- Command: magit-list-repositories
      This command displays a list of repositories in a separate buffer.
 
      The option ‘magit-repository-directories’ controls which
      repositories are displayed.
 
  -- User Option: magit-repolist-columns
      This option controls what columns are displayed by the command
      ‘magit-list-repositories’ and how they are displayed.
 
      Each element has the form ‘(HEADER WIDTH FORMAT PROPS)’.
 
      HEADER is the string displayed in the header.  WIDTH is the width
      of the column.  FORMAT is a function that is called with one
      argument, the repository identification (usually its basename), and
      with ‘default-directory’ bound to the toplevel of its working tree.
      It has to return a string to be inserted or nil.  PROPS is an alist
      that supports the keys ‘:right-align’, ‘:pad-right’ and ‘:sort’.
 
      The ‘:sort’ function has a weird interface described in the
      docstring of ‘tabulated-list--get-sort’.  Alternatively ‘<’ and
      ‘magit-repolist-version<’ can be used as those functions are
      automatically replaced with functions that satisfy the interface.
      Set ‘:sort’ to ‘nil’ to inhibit sorting; if unspecified, then the
      column is sortable using the default sorter.
 
      You may wish to display a range of numeric columns using just one
      character per column and without any padding between columns, in
      which case you should use an appropriate HEADER, set WIDTH to 1,
      and set ‘:pad-right’ to 9.  ‘+’ is substituted for numbers higher
      than 9.
 
 The following functions can be added to the above option:
 
  -- Function: magit-repolist-column-ident
      This function inserts the identification of the repository.
      Usually this is just its basename.
 
  -- Function: magit-repolist-column-path
      This function inserts the absolute path of the repository.
 
  -- Function: magit-repolist-column-version
      This function inserts a description of the repository’s ‘HEAD’
      revision.
 
  -- Function: magit-repolist-column-branch
      This function inserts the name of the current branch.
 
  -- Function: magit-repolist-column-upstream
      This function inserts the name of the upstream branch of the
      current branch.
 
  -- Function: magit-repolist-column-branches
      This function inserts the number of branches.
 
  -- Function: magit-repolist-column-stashes
      This function inserts the number of stashes.
 
  -- Function: magit-repolist-column-flag
      This function inserts a flag as specified by
      ‘magit-repolist-column-flag-alist’.
 
      By default this indicates whether there are uncommitted changes.
 
         • ‘N’ if there is at least one untracked file.
         • ‘U’ if there is at least one unstaged file.
         • ‘S’ if there is at least one staged file.
 
      Only the first one of these that applies is shown.
 
  -- Function: magit-repolist-column-flags
      This functions insert all flags as specified by
      ‘magit-repolist-column-flag-alist’.
 
      This is an alternative to function ‘magit-repolist-column-flag’,
      which only lists the first one found.
 
  -- Function: magit-repolist-column-unpulled-from-upstream
      This function inserts the number of upstream commits not in the
      current branch.
 
  -- Function: magit-repolist-column-unpulled-from-pushremote
      This function inserts the number of commits in the push branch but
      not the current branch.
 
  -- Function: magit-repolist-column-unpushed-to-upstream
      This function inserts the number of commits in the current branch
      but not its upstream.
 
  -- Function: magit-repolist-column-unpushed-to-pushremote
      This function inserts the number of commits in the current branch
      but not its push branch.
 
 The following commands are available in repolist buffers:
 
 ‘<RET>’ (‘magit-repolist-status’)
      This command shows the status for the repository at point.
 
 ‘m’ (‘magit-repolist-mark’)
      This command marks the repository at point.
 
 ‘u’ (‘magit-repolist-unmark’)
      This command unmarks the repository at point.
 
 ‘f’ (‘magit-repolist-fetch’)
      This command fetches all marked repositories.  If no repositories
      are marked, then it offers to fetch all displayed repositories.
 
 ‘5’ (‘magit-repolist-find-file-other-frame’)
      This command reads a relative file-name (without completion) and
      opens the respective file in each marked repository in a new frame.
      If no repositories are marked, then it offers to do this for all
      displayed repositories.
 
 
 File: magit.info,  Node: Logging,  Next: Diffing,  Prev: Repository List,  Up: Inspecting
 
 5.3 Logging
 ===========
 
 The status buffer contains logs for the unpushed and unpulled commits,
 but that obviously isn’t enough.  The transient prefix command
 ‘magit-log’, on ‘l’, features several suffix commands, which show a
 specific log in a separate log buffer.
 
    Like other transient prefix commands, ‘magit-log’ also features
 several infix arguments that can be changed before invoking one of the
 suffix commands.  However, in the case of the log transient, these
 arguments may be taken from those currently in use in the current
 repository’s log buffer, depending on the value of
 ‘magit-prefix-use-buffer-arguments’ (see *note Transient Arguments and
 Buffer Variables::).
 
    For information about the various arguments, see *note
 (gitman)git-log::.
 
    The switch ‘++order=VALUE’ is converted to one of
 ‘--author-date-order’, ‘--date-order’, or ‘--topo-order’ before being
 passed to ‘git log’.
 
    The log transient also features several reflog commands.  See *note
 Reflog::.
 
 ‘l’ (‘magit-log’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
 ‘l l’ (‘magit-log-current’)
      Show log for the current branch.  When ‘HEAD’ is detached or with a
      prefix argument, show log for one or more revs read from the
      minibuffer.
 
 ‘l h’ (‘magit-log-head’)
      Show log for ‘HEAD’.
 
 ‘l u’ (‘magit-log-related’)
      Show log for the current branch, its upstream and its push target.
      When the upstream is a local branch, then also show its own
      upstream.  When ‘HEAD’ is detached, then show log for that, the
      previously checked out branch and its upstream and push-target.
 
 ‘l o’ (‘magit-log-other’)
      Show log for one or more revs read from the minibuffer.  The user
      can input any revision or revisions separated by a space, or even
      ranges, but only branches, tags, and a representation of the commit
      at point are available as completion candidates.
 
 ‘l L’ (‘magit-log-branches’)
      Show log for all local branches and ‘HEAD’.
 
 ‘l b’ (‘magit-log-all-branches’)
      Show log for all local and remote branches and ‘HEAD’.
 
 ‘l a’ (‘magit-log-all’)
      Show log for all references and ‘HEAD’.
 
    Two additional commands that show the log for the file or blob that
 is being visited in the current buffer exists, see *note Commands for
 Buffers Visiting Files::.  The command ‘magit-cherry’ also shows a log,
 see *note Cherries::.
 
 * Menu:
 
 * Refreshing Logs::
 * Log Buffer::
 * Log Margin::
 * Select from Log::
 * Reflog::
 * Cherries::
 
 
 File: magit.info,  Node: Refreshing Logs,  Next: Log Buffer,  Up: Logging
 
 5.3.1 Refreshing Logs
 ---------------------
 
 The transient prefix command ‘magit-log-refresh’, on ‘L’, can be used to
 change the log arguments used in the current buffer, without changing
 which log is shown.  This works in dedicated log buffers, but also in
 the status buffer.
 
 ‘L’ (‘magit-log-refresh’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
 ‘L g’ (‘magit-log-refresh’)
      This suffix command sets the local log arguments for the current
      buffer.
 
 ‘L s’ (‘magit-log-set-default-arguments’)
      This suffix command sets the default log arguments for buffers of
      the same type as that of the current buffer.  Other existing
      buffers of the same type are not affected because their local
      values have already been initialized.
 
 ‘L w’ (‘magit-log-save-default-arguments’)
      This suffix command sets the default log arguments for buffers of
      the same type as that of the current buffer, and saves the value
      for future sessions.  Other existing buffers of the same type are
      not affected because their local values have already been
      initialized.
 
 ‘L L’ (‘magit-toggle-margin’)
      Show or hide the margin.
 
 
 File: magit.info,  Node: Log Buffer,  Next: Log Margin,  Prev: Refreshing Logs,  Up: Logging
 
 5.3.2 Log Buffer
 ----------------
 
 ‘L’ (‘magit-log-refresh’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
      See *note Refreshing Logs::.
 
 ‘q’ (‘magit-log-bury-buffer’)
      Bury the current buffer or the revision buffer in the same frame.
      Like ‘magit-mode-bury-buffer’ (which see) but with a negative
      prefix argument instead bury the revision buffer, provided it is
      displayed in the current frame.
 
 ‘C-c C-b’ (‘magit-go-backward’)
      Move backward in current buffer’s history.
 
 ‘C-c C-f’ (‘magit-go-forward’)
      Move forward in current buffer’s history.
 
 ‘C-c C-n’ (‘magit-log-move-to-parent’)
      Move to a parent of the current commit.  By default, this is the
      first parent, but a numeric prefix can be used to specify another
      parent.
 
 ‘j’ (‘magit-log-move-to-revision’)
      Read a revision and move to it in current log buffer.
 
      If the chosen reference or revision isn’t being displayed in the
      current log buffer, then inform the user about that and do nothing
      else.
 
      If invoked outside any log buffer, then display the log buffer of
      the current repository first; creating it if necessary.
 
 ‘<SPC>’ (‘magit-diff-show-or-scroll-up’)
      Update the commit or diff buffer for the thing at point.
 
      Either show the commit or stash at point in the appropriate buffer,
      or if that buffer is already being displayed in the current frame
      and contains information about that commit or stash, then instead
      scroll the buffer up.  If there is no commit or stash at point,
      then prompt for a commit.
 
 ‘<DEL>’ (‘magit-diff-show-or-scroll-down’)
      Update the commit or diff buffer for the thing at point.
 
      Either show the commit or stash at point in the appropriate buffer,
      or if that buffer is already being displayed in the current frame
      and contains information about that commit or stash, then instead
      scroll the buffer down.  If there is no commit or stash at point,
      then prompt for a commit.
 
 ‘=’ (‘magit-log-toggle-commit-limit’)
      Toggle the number of commits the current log buffer is limited to.
      If the number of commits is currently limited, then remove that
      limit.  Otherwise set it to 256.
 
 ‘+’ (‘magit-log-double-commit-limit’)
      Double the number of commits the current log buffer is limited to.
 
 ‘-’ (‘magit-log-half-commit-limit’)
      Half the number of commits the current log buffer is limited to.
 
  -- User Option: magit-log-auto-more
      Insert more log entries automatically when moving past the last
      entry.  Only considered when moving past the last entry with
      ‘magit-goto-*-section’ commands.
 
  -- User Option: magit-log-show-refname-after-summary
      Whether to show the refnames after the commit summaries.  This is
      useful if you use really long branch names.
 
  -- User Option: magit-log-show-color-graph-limit
      When showing more commits than specified by this option, then the
      ‘--color’ argument, if specified, is silently dropped.  This is
      necessary because the ‘ansi-color’ library, which is used to turn
      control sequences into faces, is just too slow.
 
  -- User Option: magit-log-show-signatures-limit
      When showing more commits than specified by this option, then the
      ‘--show-signature’ argument, if specified, is silently dropped.
      This is necessary because checking the signature of a large number
      of commits is just too slow.
 
    Magit displays references in logs a bit differently from how Git does
 it.
 
    Local branches are blue and remote branches are green.  Of course
 that depends on the used theme, as do the colors used for other types of
 references.  The current branch has a box around it, as do remote
 branches that are their respective remote’s ‘HEAD’ branch.
 
    If a local branch and its push-target point at the same commit, then
 their names are combined to preserve space and to make that relationship
 visible.  For example:
 
      origin/feature
      [green][blue-]
 
      instead of
 
      feature origin/feature
      [blue-] [green-------]
 
    Also note that while the transient features the ‘--show-signature’
 argument, that won’t actually be used when enabled, because Magit
 defaults to use just one line per commit.  Instead the commit colorized
 to indicate the validity of the signed commit object, using the faces
 named ‘magit-signature-*’ (which see).
 
    For a description of ‘magit-log-margin’ see *note Log Margin::.
 
 
 File: magit.info,  Node: Log Margin,  Next: Select from Log,  Prev: Log Buffer,  Up: Logging
 
 5.3.3 Log Margin
 ----------------
 
 In buffers which show one or more logs, it is possible to show
 additional information about each commit in the margin.  The options
 used to configure the margin are named ‘magit-INFIX-margin’, where INFIX
 is the same as in the respective major-mode ‘magit-INFIX-mode’.  In
 regular log buffers that would be ‘magit-log-margin’.
 
  -- User Option: magit-log-margin
      This option specifies whether the margin is initially shown in
      Magit-Log mode buffers and how it is formatted.
 
      The value has the form ‘(INIT STYLE WIDTH AUTHOR AUTHOR-WIDTH)’.
 
         • If INIT is non-nil, then the margin is shown initially.
         • STYLE controls how to format the author or committer date.  It
           can be one of ‘age’ (to show the age of the commit),
           ‘age-abbreviated’ (to abbreviate the time unit to a
           character), or a string (suitable for ‘format-time-string’) to
           show the actual date.  Option
           ‘magit-log-margin-show-committer-date’ controls which date is
           being displayed.
         • WIDTH controls the width of the margin.  This exists for
           forward compatibility and currently the value should not be
           changed.
         • AUTHOR controls whether the name of the author is also shown
           by default.
         • AUTHOR-WIDTH has to be an integer.  When the name of the
           author is shown, then this specifies how much space is used to
           do so.
 
    You can change the STYLE and AUTHOR-WIDTH of all ‘magit-INFIX-margin’
 options to the same values by customizing ‘magit-log-margin’ *before*
 ‘magit’ is loaded.  If you do that, then the respective values for the
 other options will default to what you have set for that variable.
 Likewise if you set INIT in ‘magit-log-margin’ to ‘nil’, then that is
 used in the default of all other options.  But setting it to ‘t’, i.e.
 re-enforcing the default for that option, does not carry to other
 options.
 
  -- User Option: magit-log-margin-show-committer-date
      This option specifies whether to show the committer date in the
      margin.  This option only controls whether the committer date is
      displayed instead of the author date.  Whether some date is
      displayed in the margin and whether the margin is displayed at all
      is controlled by other options.
 
 ‘L’ (‘magit-margin-settings’)
      This transient prefix command binds the following suffix commands,
      each of which changes the appearance of the margin in some way.
 
    In some buffers that support the margin, ‘L’ is instead bound to
 ‘magit-log-refresh’, but that transient features the same commands, and
 then some other unrelated commands.
 
 ‘L L’ (‘magit-toggle-margin’)
      This command shows or hides the margin.
 
 ‘L l’ (‘magit-cycle-margin-style’)
      This command cycles the style used for the margin.
 
 ‘L d’ (‘magit-toggle-margin-details’)
      This command shows or hides details in the margin.
 
 
 File: magit.info,  Node: Select from Log,  Next: Reflog,  Prev: Log Margin,  Up: Logging
 
 5.3.4 Select from Log
 ---------------------
 
 When the user has to select a recent commit that is reachable from
 ‘HEAD’, using regular completion would be inconvenient (because most
 humans cannot remember hashes or "HEAD~5", at least not without double
 checking).  Instead a log buffer is used to select the commit, which has
 the advantage that commits are presented in order and with the commit
 message.
 
    Such selection logs are used when selecting the beginning of a rebase
 and when selecting the commit to be squashed into.
 
    In addition to the key bindings available in all log buffers, the
 following additional key bindings are available in selection log
 buffers:
 
 ‘C-c C-c’ (‘magit-log-select-pick’)
      Select the commit at point and act on it.  Call
      ‘magit-log-select-pick-function’ with the selected commit as
      argument.
 
 ‘C-c C-k’ (‘magit-log-select-quit’)
      Abort selecting a commit, don’t act on any commit.
 
  -- User Option: magit-log-select-margin
      This option specifies whether the margin is initially shown in
      Magit-Log-Select mode buffers and how it is formatted.
 
      The value has the form ‘(INIT STYLE WIDTH AUTHOR AUTHOR-WIDTH)’.
 
         • If INIT is non-nil, then the margin is shown initially.
         • STYLE controls how to format the author or committer date.  It
           can be one of ‘age’ (to show the age of the commit),
           ‘age-abbreviated’ (to abbreviate the time unit to a
           character), or a string (suitable for ‘format-time-string’) to
           show the actual date.  Option
           ‘magit-log-margin-show-committer-date’ controls which date is
           being displayed.
         • WIDTH controls the width of the margin.  This exists for
           forward compatibility and currently the value should not be
           changed.
         • AUTHOR controls whether the name of the author is also shown
           by default.
         • AUTHOR-WIDTH has to be an integer.  When the name of the
           author is shown, then this specifies how much space is used to
           do so.
 
 
 File: magit.info,  Node: Reflog,  Next: Cherries,  Prev: Select from Log,  Up: Logging
 
 5.3.5 Reflog
 ------------
 
 Also see *note (gitman)git-reflog::.
 
    These reflog commands are available from the log transient.  See
 *note Logging::.
 
 ‘l r’ (‘magit-reflog-current’)
      Display the reflog of the current branch.
 
 ‘l O’ (‘magit-reflog-other’)
      Display the reflog of a branch or another ref.
 
 ‘l H’ (‘magit-reflog-head’)
      Display the ‘HEAD’ reflog.
 
  -- User Option: magit-reflog-margin
      This option specifies whether the margin is initially shown in
      Magit-Reflog mode buffers and how it is formatted.
 
      The value has the form ‘(INIT STYLE WIDTH AUTHOR AUTHOR-WIDTH)’.
 
         • If INIT is non-nil, then the margin is shown initially.
         • STYLE controls how to format the author or committer date.  It
           can be one of ‘age’ (to show the age of the commit),
           ‘age-abbreviated’ (to abbreviate the time unit to a
           character), or a string (suitable for ‘format-time-string’) to
           show the actual date.  Option
           ‘magit-log-margin-show-committer-date’ controls which date is
           being displayed.
         • WIDTH controls the width of the margin.  This exists for
           forward compatibility and currently the value should not be
           changed.
         • AUTHOR controls whether the name of the author is also shown
           by default.
         • AUTHOR-WIDTH has to be an integer.  When the name of the
           author is shown, then this specifies how much space is used to
           do so.
 
 
 File: magit.info,  Node: Cherries,  Prev: Reflog,  Up: Logging
 
 5.3.6 Cherries
 --------------
 
 Cherries are commits that haven’t been applied upstream (yet), and are
 usually visualized using a log.  Each commit is prefixed with ‘-’ if it
 has an equivalent in the upstream and ‘+’ if it does not, i.e., if it is
 a cherry.
 
    The command ‘magit-cherry’ shows cherries for a single branch, but
 the references buffer (see *note References Buffer::) can show cherries
 for multiple "upstreams" at once.
 
    Also see *note (gitman)git-reflog::.
 
 ‘Y’ (‘magit-cherry’)
      Show commits that are in a certain branch but that have not been
      merged in the upstream branch.
 
  -- User Option: magit-cherry-margin
      This option specifies whether the margin is initially shown in
      Magit-Cherry mode buffers and how it is formatted.
 
      The value has the form ‘(INIT STYLE WIDTH AUTHOR AUTHOR-WIDTH)’.
 
         • If INIT is non-nil, then the margin is shown initially.
         • STYLE controls how to format the author or committer date.  It
           can be one of ‘age’ (to show the age of the commit),
           ‘age-abbreviated’ (to abbreviate the time unit to a
           character), or a string (suitable for ‘format-time-string’) to
           show the actual date.  Option
           ‘magit-log-margin-show-committer-date’ controls which date is
           being displayed.
         • WIDTH controls the width of the margin.  This exists for
           forward compatibility and currently the value should not be
           changed.
         • AUTHOR controls whether the name of the author is also shown
           by default.
         • AUTHOR-WIDTH has to be an integer.  When the name of the
           author is shown, then this specifies how much space is used to
           do so.
 
 
 File: magit.info,  Node: Diffing,  Next: Ediffing,  Prev: Logging,  Up: Inspecting
 
 5.4 Diffing
 ===========
 
 The status buffer contains diffs for the staged and unstaged commits,
 but that obviously isn’t enough.  The transient prefix command
 ‘magit-diff’, on ‘d’, features several suffix commands, which show a
 specific diff in a separate diff buffer.
 
    Like other transient prefix commands, ‘magit-diff’ also features
 several infix arguments that can be changed before invoking one of the
 suffix commands.  However, in the case of the diff transient, these
 arguments may be taken from those currently in use in the current
 repository’s diff buffer, depending on the value of
 ‘magit-prefix-use-buffer-arguments’ (see *note Transient Arguments and
 Buffer Variables::).
 
    Also see *note (gitman)git-diff::.
 
 ‘d’ (‘magit-diff’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
 ‘d d’ (‘magit-diff-dwim’)
      Show changes for the thing at point.
 
 ‘d r’ (‘magit-diff-range’)
      Show differences between two commits.
 
      RANGE should be a range (A..B or A...B) but can also be a single
      commit.  If one side of the range is omitted, then it defaults to
      ‘HEAD’.  If just a commit is given, then changes in the working
      tree relative to that commit are shown.
 
      If the region is active, use the revisions on the first and last
      line of the region.  With a prefix argument, instead of diffing the
      revisions, choose a revision to view changes along, starting at the
      common ancestor of both revisions (i.e., use a "..." range).
 
 ‘d w’ (‘magit-diff-working-tree’)
      Show changes between the current working tree and the ‘HEAD’
      commit.  With a prefix argument show changes between the working
      tree and a commit read from the minibuffer.
 
 ‘d s’ (‘magit-diff-staged’)
      Show changes between the index and the ‘HEAD’ commit.  With a
      prefix argument show changes between the index and a commit read
      from the minibuffer.
 
 ‘d u’ (‘magit-diff-unstaged’)
      Show changes between the working tree and the index.
 
 ‘d p’ (‘magit-diff-paths’)
      Show changes between any two files on disk.
 
    All of the above suffix commands update the repository’s diff buffer.
 The diff transient also features two commands which show differences in
 another buffer:
 
 ‘d c’ (‘magit-show-commit’)
      Show the commit at point.  If there is no commit at point or with a
      prefix argument, prompt for a commit.
 
 ‘d t’ (‘magit-stash-show’)
      Show all diffs of a stash in a buffer.
 
    Two additional commands that show the diff for the file or blob that
 is being visited in the current buffer exists, see *note Commands for
 Buffers Visiting Files::.
 
 * Menu:
 
 * Refreshing Diffs::
 * Commands Available in Diffs::
 * Diff Options::
 * Revision Buffer::
 
 
 File: magit.info,  Node: Refreshing Diffs,  Next: Commands Available in Diffs,  Up: Diffing
 
 5.4.1 Refreshing Diffs
 ----------------------
 
 The transient prefix command ‘magit-diff-refresh’, on ‘D’, can be used
 to change the diff arguments used in the current buffer, without
 changing which diff is shown.  This works in dedicated diff buffers, but
 also in the status buffer.
 
    (There is one exception; diff arguments cannot be changed in buffers
 created by ‘magit-merge-preview’ because the underlying Git command does
 not support these arguments.)
 
 ‘D’ (‘magit-diff-refresh’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
 ‘D g’ (‘magit-diff-refresh’)
      This suffix command sets the local diff arguments for the current
      buffer.
 
 ‘D s’ (‘magit-diff-set-default-arguments’)
      This suffix command sets the default diff arguments for buffers of
      the same type as that of the current buffer.  Other existing
      buffers of the same type are not affected because their local
      values have already been initialized.
 
 ‘D w’ (‘magit-diff-save-default-arguments’)
      This suffix command sets the default diff arguments for buffers of
      the same type as that of the current buffer, and saves the value
      for future sessions.  Other existing buffers of the same type are
      not affected because their local values have already been
      initialized.
 
 ‘D t’ (‘magit-diff-toggle-refine-hunk’)
      This command toggles hunk refinement on or off.
 
 ‘D r’ (‘magit-diff-switch-range-type’)
      This command converts the diff range type from "revA..revB" to
      "revB...revA", or vice versa.
 
 ‘D f’ (‘magit-diff-flip-revs’)
      This command swaps revisions in the diff range from "revA..revB" to
      "revB..revA", or vice versa.
 
 ‘D F’ (‘magit-diff-toggle-file-filter’)
      This command toggles the file restriction of the diffs in the
      current buffer, allowing you to quickly switch between viewing all
      the changes in the commit and the restricted subset.  As a special
      case, when this command is called from a log buffer, it toggles the
      file restriction in the repository’s revision buffer, which is
      useful when you display a revision from a log buffer that is
      restricted to a file or files.
 
    In addition to the above transient, which allows changing any of the
 supported arguments, there also exist some commands that change only a
 particular argument.
 
 ‘-’ (‘magit-diff-less-context’)
      This command decreases the context for diff hunks by COUNT lines.
 
 ‘+’ (‘magit-diff-more-context’)
      This command increases the context for diff hunks by COUNT lines.
 
 ‘0’ (‘magit-diff-default-context’)
      This command resets the context for diff hunks to the default
      height.
 
    The following commands quickly change what diff is being displayed
 without having to using one of the diff transient.
 
 ‘C-c C-d’ (‘magit-diff-while-committing’)
      While committing, this command shows the changes that are about to
      be committed.  While amending, invoking the command again toggles
      between showing just the new changes or all the changes that will
      be committed.
 
      This binding is available in the diff buffer as well as the commit
      message buffer.
 
 ‘C-c C-b’ (‘magit-go-backward’)
      This command moves backward in current buffer’s history.
 
 ‘C-c C-f’ (‘magit-go-forward’)
      This command moves forward in current buffer’s history.
 
 
 File: magit.info,  Node: Commands Available in Diffs,  Next: Diff Options,  Prev: Refreshing Diffs,  Up: Diffing
 
 5.4.2 Commands Available in Diffs
 ---------------------------------
 
 Some commands are only available if point is inside a diff.
 
    ‘magit-diff-visit-file’ and related commands visit the appropriate
 version of the file that the diff at point is about.  Likewise
 ‘magit-diff-visit-worktree-file’ and related commands visit the worktree
 version of the file that the diff at point is about.  See *note Visiting
 Files and Blobs from a Diff:: for more information and the key bindings.
 
 ‘C-c C-t’ (‘magit-diff-trace-definition’)
      This command shows a log for the definition at point.
 
  -- User Option: magit-log-trace-definition-function
      The function specified by this option is used by
      ‘magit-log-trace-definition’ to determine the function at point.
      For major-modes that have special needs, you could set the local
      value using the mode’s hook.
 
 ‘C-c C-e’ (‘magit-diff-edit-hunk-commit’)
      From a hunk, this command edits the respective commit and visits
      the file.
 
      First it visits the file being modified by the hunk at the correct
      location using ‘magit-diff-visit-file’.  This actually visits a
      blob.  When point is on a diff header, not within an individual
      hunk, then this visits the blob the first hunk is about.
 
      Then it invokes ‘magit-edit-line-commit’, which uses an interactive
      rebase to make the commit editable, or if that is not possible
      because the commit is not reachable from ‘HEAD’ by checking out
      that commit directly.  This also causes the actual worktree file to
      be visited.
 
      Neither the blob nor the file buffer are killed when finishing the
      rebase.  If that is undesirable, then it might be better to use
      ‘magit-rebase-edit-commit’ instead of this command.
 
 ‘j’ (‘magit-jump-to-diffstat-or-diff’)
      This command jumps to the diffstat or diff.  When point is on a
      file inside the diffstat section, then jump to the respective diff
      section.  Otherwise, jump to the diffstat section or a child
      thereof.
 
    The next two commands are not specific to Magit-Diff mode (or and
 Magit buffer for that matter), but it might be worth pointing out that
 they are available here too.
 
 ‘<SPC>’ (‘scroll-up’)
      This command scrolls text upward.
 
 ‘<DEL>’ (‘scroll-down’)
      This command scrolls text downward.
 
 
 File: magit.info,  Node: Diff Options,  Next: Revision Buffer,  Prev: Commands Available in Diffs,  Up: Diffing
 
 5.4.3 Diff Options
 ------------------
 
  -- User Option: magit-diff-refine-hunk
      Whether to show word-granularity differences within diff hunks.
 
         • ‘nil’ Never show fine differences.
         • ‘t’ Show fine differences for the current diff hunk only.
         • ‘all’ Show fine differences for all displayed diff hunks.
 
  -- User Option: magit-diff-refine-ignore-whitespace
      Whether to ignore whitespace changes in word-granularity
      differences.
 
  -- User Option: magit-diff-adjust-tab-width
      Whether to adjust the width of tabs in diffs.
 
      Determining the correct width can be expensive if it requires
      opening large and/or many files, so the widths are cached in the
      variable ‘magit-diff--tab-width-cache’.  Set that to nil to
      invalidate the cache.
 
         • ‘nil’ Never adjust tab width.  Use ‘tab-width’s value from the
           Magit buffer itself instead.
 
         • ‘t’ If the corresponding file-visiting buffer exits, then use
           ‘tab-width’’s value from that buffer.  Doing this is cheap, so
           this value is used even if a corresponding cache entry exists.
 
         • ‘always’ If there is no such buffer, then temporarily visit
           the file to determine the value.
 
         • NUMBER Like ‘always’, but don’t visit files larger than NUMBER
           bytes.
 
  -- User Option: magit-diff-paint-whitespace
      Specify where to highlight whitespace errors.
 
      See ‘magit-diff-highlight-trailing’,
      ‘magit-diff-highlight-indentation’.  The symbol ‘t’ means in all
      diffs, ‘status’ means only in the status buffer, and nil means
      nowhere.
 
         • ‘nil’ Never highlight whitespace errors.
         • ‘t’ Highlight whitespace errors everywhere.
         • ‘uncommitted’ Only highlight whitespace errors in diffs
           showing uncommitted changes.  For backward compatibility
           ‘status’ is treated as a synonym.
 
  -- User Option: magit-diff-paint-whitespace-lines
      Specify in what kind of lines to highlight whitespace errors.
 
         • ‘t’ Highlight only in added lines.
         • ‘both’ Highlight in added and removed lines.
         • ‘all’ Highlight in added, removed and context lines.
 
  -- User Option: magit-diff-highlight-trailing
      Whether to highlight whitespace at the end of a line in diffs.
      Used only when ‘magit-diff-paint-whitespace’ is non-nil.
 
  -- User Option: magit-diff-highlight-indentation
      This option controls whether to highlight the indentation in case
      it used the "wrong" indentation style.  Indentation is only
      highlighted if ‘magit-diff-paint-whitespace’ is also non-nil.
 
      The value is an alist of the form ‘((REGEXP . INDENT)...)’.  The
      path to the current repository is matched against each element in
      reverse order.  Therefore if a REGEXP matches, then earlier
      elements are not tried.
 
      If the used INDENT is ‘tabs’, highlight indentation with tabs.  If
      INDENT is an integer, highlight indentation with at least that many
      spaces.  Otherwise, highlight neither.
 
  -- User Option: magit-diff-hide-trailing-cr-characters
      Whether to hide ^M characters at the end of a line in diffs.
 
  -- User Option: magit-diff-highlight-hunk-region-functions
      This option specifies the functions used to highlight the
      hunk-internal region.
 
      ‘magit-diff-highlight-hunk-region-dim-outside’ overlays the outside
      of the hunk internal selection with a face that causes the added
      and removed lines to have the same background color as context
      lines.  This function should not be removed from the value of this
      option.
 
      ‘magit-diff-highlight-hunk-region-using-overlays’ and
      ‘magit-diff-highlight-hunk-region-using-underline’ emphasize the
      region by placing delimiting horizontal lines before and after it.
      Both of these functions have glitches which cannot be fixed due to
      limitations of Emacs’ display engine.  For more information see
      <https://github.com/magit/magit/issues/2758> ff.
 
      Instead of, or in addition to, using delimiting horizontal lines,
      to emphasize the boundaries, you may wish to emphasize the text
      itself, using ‘magit-diff-highlight-hunk-region-using-face’.
 
      In terminal frames it’s not possible to draw lines as the overlay
      and underline variants normally do, so there they fall back to
      calling the face function instead.
 
  -- User Option: magit-diff-unmarked-lines-keep-foreground
      This option controls whether added and removed lines outside the
      hunk-internal region only lose their distinct background color or
      also the foreground color.  Whether the outside of the region is
      dimmed at all depends on
      ‘magit-diff-highlight-hunk-region-functions’.
 
  -- User Option: magit-diff-extra-stat-arguments
      This option specifies additional arguments to be used alongside
      ‘--stat’.
 
      The value is a list of zero or more arguments or a function that
      takes no argument and returns such a list.  These arguments are
      allowed here: ‘--stat-width’, ‘--stat-name-width’,
      ‘--stat-graph-width’ and ‘--compact-summary’.  Also see *note
      (gitman)git-diff::.
 
 
 File: magit.info,  Node: Revision Buffer,  Prev: Diff Options,  Up: Diffing
 
 5.4.4 Revision Buffer
 ---------------------
 
  -- User Option: magit-revision-insert-related-refs
      Whether to show related branches in revision buffers.
 
         • ‘nil’ Don’t show any related branches.
         • ‘t’ Show related local branches.
         • ‘all’ Show related local and remote branches.
         • ‘mixed’ Show all containing branches and local merged
           branches.
 
  -- User Option: magit-revision-show-gravatars
      Whether to show gravatar images in revision buffers.
 
      If ‘nil’, then don’t insert any gravatar images.  If ‘t’, then
      insert both images.  If ‘author’ or ‘committer’, then insert only
      the respective image.
 
      If you have customized the option ‘magit-revision-headers-format’
      and want to insert the images then you might also have to specify
      where to do so.  In that case the value has to be a cons-cell of
      two regular expressions.  The car specifies where to insert the
      author’s image.  The top half of the image is inserted right after
      the matched text, the bottom half on the next line in the same
      column.  The cdr specifies where to insert the committer’s image,
      accordingly.  Either the car or the cdr may be nil."
 
  -- User Option: magit-revision-use-hash-sections
      Whether to turn hashes inside the commit message into sections.
 
      If non-nil, then hashes inside the commit message are turned into
      ‘commit’ sections.  There is a trade off to be made between
      performance and reliability:
 
         • ‘slow’ calls git for every word to be absolutely sure.
         • ‘quick’ skips words less than seven characters long.
         • ‘quicker’ additionally skips words that don’t contain a
           number.
         • ‘quickest’ uses all words that are at least seven characters
           long and which contain at least one number as well as at least
           one letter.
 
      If nil, then no hashes are turned into sections, but you can still
      visit the commit at point using "RET".
 
    The diffs shown in the revision buffer may be automatically
 restricted to a subset of the changed files.  If the revision buffer is
 displayed from a log buffer, the revision buffer will share the same
 file restriction as that log buffer (also see the command
 ‘magit-diff-toggle-file-filter’).
 
  -- User Option: magit-revision-filter-files-on-follow
      Whether showing a commit from a log buffer honors the log’s file
      filter when the log arguments include ‘--follow’.
 
      When this option is nil, displaying a commit from a log ignores the
      log’s file filter if the log arguments include ‘--follow’.  Doing
      so avoids showing an empty diff in revision buffers for commits
      before a rename event.  In such cases, the ‘--patch’ argument of
      the log transient can be used to show the file-restricted diffs
      inline.
 
      Set this option to non-nil to keep the log’s file restriction even
      if ‘--follow’ is present in the log arguments.
 
    If the revision buffer is not displayed from a log buffer, the file
 restriction is determined as usual (see *note Transient Arguments and
 Buffer Variables::).
 
 
 File: magit.info,  Node: Ediffing,  Next: References Buffer,  Prev: Diffing,  Up: Inspecting
 
 5.5 Ediffing
 ============
 
 This section describes how to enter Ediff from Magit buffers.  For
 information on how to use Ediff itself, see *note (ediff)Top::.
 
 ‘e’ (‘magit-ediff-dwim’)
      Compare, stage, or resolve using Ediff.
 
      This command tries to guess what file, and what commit or range the
      user wants to compare, stage, or resolve using Ediff.  It might
      only be able to guess either the file, or range/commit, in which
      case the user is asked about the other.  It might not always guess
      right, in which case the appropriate ‘magit-ediff-*’ command has to
      be used explicitly.  If it cannot read the user’s mind at all, then
      it asks the user for a command to run.
 
 ‘E’ (‘magit-ediff’)
      This transient prefix command binds the following suffix commands
      and displays them in a temporary buffer until a suffix is invoked.
 
 ‘E r’ (‘magit-ediff-compare’)
      Compare two revisions of a file using Ediff.
 
      If the region is active, use the revisions on the first and last
      line of the region.  With a prefix argument, instead of diffing the
      revisions, choose a revision to view changes along, starting at the
      common ancestor of both revisions (i.e., use a "..." range).
 
 ‘E m’ (‘magit-ediff-resolve-rest’)
      This command allows you to resolve outstanding conflicts in the
      file at point using Ediff.  If there is no file at point or if it
      doesn’t have any unmerged changes, then this command prompts for a
      file.
 
      Provided that the value of ‘merge.conflictstyle’ is ‘diff3’, you
      can view the file’s merge-base revision using ‘/’ in the Ediff
      control buffer.
 
      The A, B and Ancestor buffers are constructed from the conflict
      markers in the worktree file.  Because you and/or Git may have
      already resolved some conflicts, that means that these buffers may
      not contain the actual versions from the respective blobs.
 
 ‘E m’ (‘magit-ediff-resolve-all’)
      This command allows you to resolve all conflicts in the file at
      point using Ediff.  If there is no file at point or if it doesn’t
      have any unmerged changes, then this command prompts for a file.
 
      Provided that the value of ‘merge.conflictstyle’ is ‘diff3’, you
      can view the file’s merge-base revision using ‘/’ in the Ediff
      control buffer.
 
      First the file in the worktree is moved aside, appending the suffix
      ‘.ORIG’, so that you could later go back to that version.  Then it
      is reconstructed from the two sides of the conflict and the
      merge-base, if available.
 
      It would be nice if the worktree file were just used as-is, but
      Ediff does not support that.  This means that all conflicts, that
      Git has already resolved, are restored.  On the other hand Ediff
      also tries to resolve conflicts, and in many cases Ediff and Git
      should produce similar results.
 
      However if you have already resolved some conflicts manually, then
      those changes are discarded (though you can recover them from the
      backup file).  In such cases ‘magit-ediff-resolve-rest’ might be
      more suitable.
 
      The advantage that this command has over ‘magit-ediff-resolve-rest’
      is that the A, B and Ancestor buffers correspond to blobs from the
      respective commits, allowing you to inspect a side in context and
      to use Magit commands in these buffers to do so.  Blame and log
      commands are particularly useful here.
 
 ‘E t’ (‘magit-git-mergetool’)
      This command does not actually use Ediff.  While it serves the same
      purpose as ‘magit-ediff-resolve-rest’, it uses ‘git mergetool
      --gui’ to resolve conflicts.
 
      With a prefix argument this acts as a transient prefix command,
      allowing the user to select the mergetool and change some settings.
 
 ‘E s’ (‘magit-ediff-stage’)
      Stage and unstage changes to a file using Ediff, defaulting to the
      file at point.
 
 ‘E u’ (‘magit-ediff-show-unstaged’)
      Show unstaged changes to a file using Ediff.
 
 ‘E i’ (‘magit-ediff-show-staged’)
      Show staged changes to a file using Ediff.
 
 ‘E w’ (‘magit-ediff-show-working-tree’)
      Show changes in a file between ‘HEAD’ and working tree using Ediff.
 
 ‘E c’ (‘magit-ediff-show-commit’)
      Show changes to a file introduced by a commit using Ediff.
 
 ‘E z’ (‘magit-ediff-show-stash’)
      Show changes to a file introduced by a stash using Ediff.
 
  -- User Option: magit-ediff-dwim-resolve-function
      This option controls which function ‘magit-ediff-dwim’ uses to
      resolve conflicts.  One of ‘magit-ediff-resolve-rest’,
      ‘magit-ediff-resolve-all’ or ‘magit-git-mergetool’; which are all
      discussed above.
 
  -- User Option: magit-ediff-dwim-show-on-hunks
      This option controls what command ‘magit-ediff-dwim’ calls when
      point is on uncommitted hunks.  When nil, always run
      ‘magit-ediff-stage’.  Otherwise, use ‘magit-ediff-show-staged’ and
      ‘magit-ediff-show-unstaged’ to show staged and unstaged changes,
      respectively.
 
  -- User Option: magit-ediff-show-stash-with-index
      This option controls whether ‘magit-ediff-show-stash’ includes a
      buffer containing the file’s state in the index at the time the
      stash was created.  This makes it possible to tell which changes in
      the stash were staged.
 
  -- User Option: magit-ediff-quit-hook
      This hook is run after quitting an Ediff session that was created
      using a Magit command.  The hook functions are run inside the Ediff
      control buffer, and should not change the current buffer.
 
      This is similar to ‘ediff-quit-hook’ but takes the needs of Magit
      into account.  The regular ‘ediff-quit-hook’ is ignored by Ediff
      sessions that were created using a Magit command.
 
 
 File: magit.info,  Node: References Buffer,  Next: Bisecting,  Prev: Ediffing,  Up: Inspecting
 
 5.6 References Buffer
 =====================
 
 ‘y’ (‘magit-show-refs’)
      This command lists branches and tags in a dedicated buffer.
 
      However if this command is invoked again from this buffer or if it
      is invoked with a prefix argument, then it acts as a transient
      prefix command, which binds the following suffix commands and some
      infix arguments.
 
    All of the following suffix commands list exactly the same branches
 and tags.  The only difference the optional feature that can be enabled
 by changing the value of ‘magit-refs-show-commit-count’ (see below).
 These commands specify a different branch or commit against which all
 the other references are compared.
 
 ‘y y’ (‘magit-show-refs-head’)
      This command lists branches and tags in a dedicated buffer.  Each
      reference is being compared with ‘HEAD’.
 
 ‘y c’ (‘magit-show-refs-current’)
      This command lists branches and tags in a dedicated buffer.  Each
      reference is being compared with the current branch or ‘HEAD’ if it
      is detached.
 
 ‘y o’ (‘magit-show-refs-other’)
      This command lists branches and tags in a dedicated buffer.  Each
      reference is being compared with a branch read from the user.
 
 ‘y r’ (‘magit-refs-set-show-commit-count’)
      This command changes for which refs the commit count is shown.
 
  -- User Option: magit-refs-show-commit-count
      Whether to show commit counts in Magit-Refs mode buffers.
 
         • ‘all’ Show counts for branches and tags.
         • ‘branch’ Show counts for branches only.
         • ‘nil’ Never show counts.
 
      The default is ‘nil’ because anything else can be very expensive.
 
  -- User Option: magit-refs-pad-commit-counts
      Whether to pad all commit counts on all sides in Magit-Refs mode
      buffers.
 
      If this is nil, then some commit counts are displayed right next to
      one of the branches that appear next to the count, without any
      space in between.  This might look bad if the branch name faces
      look too similar to ‘magit-dimmed’.
 
      If this is non-nil, then spaces are placed on both sides of all
      commit counts.
 
  -- User Option: magit-refs-show-remote-prefix
      Whether to show the remote prefix in lists of remote branches.
 
      Showing the prefix is redundant because the name of the remote is
      already shown in the heading preceding the list of its branches.
 
  -- User Option: magit-refs-primary-column-width
      Width of the primary column in ‘magit-refs-mode’ buffers.  The
      primary column is the column that contains the name of the branch
      that the current row is about.
 
      If this is an integer, then the column is that many columns wide.
      Otherwise it has to be a cons-cell of two integers.  The first
      specifies the minimal width, the second the maximal width.  In that
      case the actual width is determined using the length of the names
      of the shown local branches.  (Remote branches and tags are not
      taken into account when calculating to optimal width.)
 
  -- User Option: magit-refs-focus-column-width
      Width of the focus column in ‘magit-refs-mode’ buffers.
 
      The focus column is the first column, which marks one branch
      (usually the current branch) as the focused branch using ‘*’ or
      ‘@’.  For each other reference, this column optionally shows how
      many commits it is ahead of the focused branch and ‘<’, or if it
      isn’t ahead then the commits it is behind and ‘>’, or if it isn’t
      behind either, then a ‘=’.
 
      This column may also display only ‘*’ or ‘@’ for the focused
      branch, in which case this option is ignored.  Use ‘L v’ to change
      the verbosity of this column.
 
  -- User Option: magit-refs-margin
      This option specifies whether the margin is initially shown in
      Magit-Refs mode buffers and how it is formatted.
 
      The value has the form ‘(INIT STYLE WIDTH AUTHOR AUTHOR-WIDTH)’.
 
         • If INIT is non-nil, then the margin is shown initially.
         • STYLE controls how to format the author or committer date.  It
           can be one of ‘age’ (to show the age of the commit),
           ‘age-abbreviated’ (to abbreviate the time unit to a
           character), or a string (suitable for ‘format-time-string’) to
           show the actual date.  Option
           ‘magit-log-margin-show-committer-date’ controls which date is
           being displayed.
         • WIDTH controls the width of the margin.  This exists for
           forward compatibility and currently the value should not be
           changed.
         • AUTHOR controls whether the name of the author is also shown
           by default.
         • AUTHOR-WIDTH has to be an integer.  When the name of the
           author is shown, then this specifies how much space is used to
           do so.
 
  -- User Option: magit-refs-margin-for-tags
      This option specifies whether to show information about tags in the
      margin.  This is disabled by default because it is slow if there
      are many tags.
 
    The following variables control how individual refs are displayed.
 If you change one of these variables (especially the "%c" part), then
 you should also change the others to keep things aligned.  The following
 %-sequences are supported:
 
    • ‘%a’ Number of commits this ref has over the one we compare to.
    • ‘%b’ Number of commits the ref we compare to has over this one.
    • ‘%c’ Number of commits this ref has over the one we compare to.
      For the ref which all other refs are compared this is instead "@",
      if it is the current branch, or "#" otherwise.
    • ‘%C’ For the ref which all other refs are compared this is "@", if
      it is the current branch, or "#" otherwise.  For all other refs "
      ".
    • ‘%h’ Hash of this ref’s tip.
    • ‘%m’ Commit summary of the tip of this ref.
    • ‘%n’ Name of this ref.
    • ‘%u’ Upstream of this local branch.
    • ‘%U’ Upstream of this local branch and additional local vs.
      upstream information.
 
  -- User Option: magit-refs-filter-alist
      The purpose of this option is to forgo displaying certain refs
      based on their name.  If you want to not display any refs of a
      certain type, then you should remove the appropriate function from
      ‘magit-refs-sections-hook’ instead.
 
      This alist controls which tags and branches are omitted from being
      displayed in ‘magit-refs-mode’ buffers.  If it is ‘nil’, then all
      refs are displayed (subject to ‘magit-refs-sections-hook’).
 
      All keys are tried in order until one matches.  Then its value is
      used and subsequent elements are ignored.  If the value is non-nil,
      then the reference is displayed, otherwise it is not.  If no
      element matches, then the reference is displayed.
 
      A key can either be a regular expression that the refname has to
      match, or a function that takes the refname as only argument and
      returns a boolean.  A remote branch such as "origin/master" is
      displayed as just "master", however for this comparison the former
      is used.
 
 ‘<RET>’ (‘magit-visit-ref’)
      This command visits the reference or revision at point in another
      buffer.  If there is no revision at point or with a prefix argument
      then it prompts for a revision.
 
      This command behaves just like ‘magit-show-commit’ as described
      above, except if point is on a reference in a ‘magit-refs-mode’
      buffer, in which case the behavior may be different, but only if
      you have customized the option ‘magit-visit-ref-behavior’.
 
  -- User Option: magit-visit-ref-behavior
      This option controls how ‘magit-visit-ref’ behaves in
      ‘magit-refs-mode’ buffers.
 
      By default ‘magit-visit-ref’ behaves like ‘magit-show-commit’, in
      all buffers, including ‘magit-refs-mode’ buffers.  When the type of
      the section at point is ‘commit’ then "RET" is bound to
      ‘magit-show-commit’, and when the type is either ‘branch’ or ‘tag’
      then it is bound to ‘magit-visit-ref’.
 
      "RET" is one of Magit’s most essential keys and at least by default
      it should behave consistently across all of Magit, especially
      because users quickly learn that it does something very harmless;
      it shows more information about the thing at point in another
      buffer.
 
      However "RET" used to behave differently in ‘magit-refs-mode’
      buffers, doing surprising things, some of which cannot really be
      described as "visit this thing".  If you’ve grown accustomed this
      behavior, you can restore it by adding one or more of the below
      symbols to the value of this option.  But keep in mind that by
      doing so you don’t only introduce inconsistencies, you also lose
      some functionality and might have to resort to ‘M-x
      magit-show-commit’ to get it back.
 
      ‘magit-visit-ref’ looks for these symbols in the order in which
      they are described here.  If the presence of a symbol applies to
      the current situation, then the symbols that follow do not affect
      the outcome.
 
         • ‘focus-on-ref’
 
           With a prefix argument update the buffer to show commit counts
           and lists of cherry commits relative to the reference at point
           instead of relative to the current buffer or ‘HEAD’.
 
           Instead of adding this symbol, consider pressing "C-u y o
           RET".
 
         • ‘create-branch’
 
           If point is on a remote branch, then create a new local branch
           with the same name, use the remote branch as its upstream, and
           then check out the local branch.
 
           Instead of adding this symbol, consider pressing "b c RET
           RET", like you would do in other buffers.
 
         • ‘checkout-any’
 
           Check out the reference at point.  If that reference is a tag
           or a remote branch, then this results in a detached ‘HEAD’.
 
           Instead of adding this symbol, consider pressing "b b RET",
           like you would do in other buffers.
 
         • ‘checkout-branch’
 
           Check out the local branch at point.
 
           Instead of adding this symbol, consider pressing "b b RET",
           like you would do in other buffers.
 
 * Menu:
 
 * References Sections::
 
 
 File: magit.info,  Node: References Sections,  Up: References Buffer
 
 5.6.1 References Sections
 -------------------------
 
 The contents of references buffers is controlled using the hook
 ‘magit-refs-sections-hook’.  See *note Section Hooks:: to learn about
 such hooks and how to customize them.  All of the below functions are
 members of the default value.  Note that it makes much less sense to
 customize this hook than it does for the respective hook used for the
 status buffer.
 
  -- User Option: magit-refs-sections-hook
      Hook run to insert sections into a references buffer.
 
  -- Function: magit-insert-local-branches
      Insert sections showing all local branches.
 
  -- Function: magit-insert-remote-branches
      Insert sections showing all remote-tracking branches.
 
  -- Function: magit-insert-tags
      Insert sections showing all tags.
 
 
 File: magit.info,  Node: Bisecting,  Next: Visiting Files and Blobs,  Prev: References Buffer,  Up: Inspecting
 
 5.7 Bisecting
 =============
 
 Also see *note (gitman)git-bisect::.
 
 ‘B’ (‘magit-bisect’)
      This transient prefix command binds the following suffix commands
      and displays them in a temporary buffer until a suffix is invoked.
 
    When bisecting is not in progress, then the transient features the
 following suffix commands.
 
 ‘B B’ (‘magit-bisect-start’)
      Start a bisect session.
 
      Bisecting a bug means to find the commit that introduced it.  This
      command starts such a bisect session by asking for a known good
      commit and a known bad commit.  If you’re bisecting a change that
      isn’t a regression, you can select alternate terms that are
      conceptually more fitting than "bad" and "good", but the infix
      arguments to do so are disabled by default.
 
 ‘B s’ (‘magit-bisect-run’)
      Bisect automatically by running commands after each step.
 
    When bisecting in progress, then the transient instead features the
 following suffix commands.
 
 ‘B b’ (‘magit-bisect-bad’)
      Mark the current commit as bad.  Use this after you have asserted
      that the commit does contain the bug in question.
 
 ‘B g’ (‘magit-bisect-good’)
      Mark the current commit as good.  Use this after you have asserted
      that the commit does not contain the bug in question.
 
 ‘B m’ (‘magit-bisect-mark’)
      Mark the current commit with one of the bisect terms.  This command
      provides an alternative to ‘magit-bisect-bad’ and
      ‘magit-bisect-good’ and is useful when using terms other than "bad"
      and "good".  This suffix is disabled by default.
 
 ‘B k’ (‘magit-bisect-skip’)
      Skip the current commit.  Use this if for some reason the current
      commit is not a good one to test.  This command lets Git choose a
      different one.
 
 ‘B r’ (‘magit-bisect-reset’)
      After bisecting, cleanup bisection state and return to original
      ‘HEAD’.
 
    By default the status buffer shows information about the ongoing
 bisect session.
 
  -- User Option: magit-bisect-show-graph
      This option controls whether a graph is displayed for the log of
      commits that still have to be bisected.
 
 
 File: magit.info,  Node: Visiting Files and Blobs,  Next: Blaming,  Prev: Bisecting,  Up: Inspecting
 
 5.8 Visiting Files and Blobs
 ============================
 
 Magit provides several commands that visit a file or blob (the version
 of a file that is stored in a certain commit).  Actually it provides
 several *groups* of such commands and the several *variants* within each
 group.
 
    Also see *note Commands for Buffers Visiting Files::.
 
 * Menu:
 
 * General-Purpose Visit Commands::
 * Visiting Files and Blobs from a Diff::
 
 
 File: magit.info,  Node: General-Purpose Visit Commands,  Next: Visiting Files and Blobs from a Diff,  Up: Visiting Files and Blobs
 
 5.8.1 General-Purpose Visit Commands
 ------------------------------------
 
 These commands can be used anywhere to open any blob.  Currently no keys
 are bound to these commands by default, but that is likely to change.
 
  -- Command: magit-find-file
      This command reads a filename and revision from the user and visits
      the respective blob in a buffer.  The buffer is displayed in the
      selected window.
 
  -- Command: magit-find-file-other-window
      This command reads a filename and revision from the user and visits
      the respective blob in a buffer.  The buffer is displayed in
      another window.
 
  -- Command: magit-find-file-other-frame
      This command reads a filename and revision from the user and visits
      the respective blob in a buffer.  The buffer is displayed in
      another frame.
 
 
 File: magit.info,  Node: Visiting Files and Blobs from a Diff,  Prev: General-Purpose Visit Commands,  Up: Visiting Files and Blobs
 
 5.8.2 Visiting Files and Blobs from a Diff
 ------------------------------------------
 
 These commands can only be used when point is inside a diff.
 
 ‘<RET>’ (‘magit-diff-visit-file’)
      This command visits the appropriate version of the file that the
      diff at point is about.
 
      This commands visits the worktree version of the appropriate file.
      The location of point inside the diff determines which file is
      being visited.  The visited version depends on what changes the
      diff is about.
 
        1. If the diff shows uncommitted changes (i.e., staged or
           unstaged changes), then visit the file in the working tree
           (i.e., the same "real" file that ‘find-file’ would visit.  In
           all other cases visit a "blob" (i.e., the version of a file as
           stored in some commit).
 
        2. If point is on a removed line, then visit the blob for the
           first parent of the commit that removed that line, i.e., the
           last commit where that line still exists.
 
        3. If point is on an added or context line, then visit the blob
           that adds that line, or if the diff shows from more than a
           single commit, then visit the blob from the last of these
           commits.
 
      In the file-visiting buffer this command goes to the line that
      corresponds to the line that point is on in the diff.
 
      The buffer is displayed in the selected window.  With a prefix
      argument the buffer is displayed in another window instead.
 
  -- User Option: magit-diff-visit-previous-blob
      This option controls whether ‘magit-diff-visit-file’ may visit the
      previous blob.  When this is ‘t’ (the default) and point is on a
      removed line in a diff for a committed change, then
      ‘magit-diff-visit-file’ visits the blob from the last revision
      which still had that line.
 
      Currently this is only supported for committed changes, for staged
      and unstaged changes ‘magit-diff-visit-file’ always visits the file
      in the working tree.
 
 ‘C-<return>’ (‘magit-diff-visit-file-worktree’)
      This command visits the worktree version of the appropriate file.
      The location of point inside the diff determines which file is
      being visited.  Unlike ‘magit-diff-visit-file’ it always visits the
      "real" file in the working tree, i.e the "current version" of the
      file.
 
      In the file-visiting buffer this command goes to the line that
      corresponds to the line that point is on in the diff.  Lines that
      were added or removed in the working tree, the index and other
      commits in between are automatically accounted for.
 
      The buffer is displayed in the selected window.  With a prefix
      argument the buffer is displayed in another window instead.
 
    Variants of the above two commands exist that instead visit the file
 in another window or in another frame.  If you prefer such behavior,
 then you may want to change the above key bindings, but note that the
 above commands also use another window when invoked with a prefix
 argument.
 
  -- Command: magit-diff-visit-file-other-window
  -- Command: magit-diff-visit-file-other-frame
  -- Command: magit-diff-visit-worktree-file-other-window
  -- Command: magit-diff-visit-worktree-file-other-frame
 
 
 File: magit.info,  Node: Blaming,  Prev: Visiting Files and Blobs,  Up: Inspecting
 
 5.9 Blaming
 ===========
 
 Also see *note (gitman)git-blame::.
 
    To start blaming, invoke the ‘magit-file-dispatch’ transient prefix
 command.  When using the default key bindings, that can be done by
 pressing ‘C-c M-g’.  When using the recommended bindings, this command
 is instead bound to ‘C-c f’.  Also see *note Global Bindings::.
 
    The blaming suffix commands can be invoked directly from the file
 dispatch transient.  However if you want to set an infix argument, then
 you have to enter the blaming sub-prefix first.
 
 ‘C-c f B’ (‘magit-blame’)
 ‘C-c f b’ (‘magit-blame-addition’)
 ‘C-c f B b’
 ‘C-c f r’ (‘magit-blame-removal’)
 ‘C-c f B r’
 ‘C-c f f’ (‘magit-blame-reverse’)
 ‘C-c f B f’
 ‘C-c f e’ (‘magit-blame-echo’)
 ‘C-c f B e’
 ‘C-c f q’ (‘magit-blame-quit’)
 ‘C-c f B q’
      Each of these commands is documented individually right below,
      alongside their default key bindings.  The bindings shown above are
      the recommended bindings, which you can enable by following the
      instructions in *note Global Bindings::.
 
 ‘C-c M-g B’ (‘magit-blame’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
    Note that not all of the following suffixes are available at all
 times.  For example if ‘magit-blame-mode’ is not enabled, then the
 command whose purpose is to turn off that mode would not be of any use
 and therefore isn’t available.
 
 ‘C-c M-g b’ (‘magit-blame-addition’)
 ‘C-c M-g B b’
      This command augments each line or chunk of lines in the current
      file-visiting or blob-visiting buffer with information about what
      commits last touched these lines.
 
      If the buffer visits a revision of that file, then history up to
      that revision is considered.  Otherwise, the file’s full history is
      considered, including uncommitted changes.
 
      If Magit-Blame mode is already turned on in the current buffer then
      blaming is done recursively, by visiting REVISION:FILE (using
      ‘magit-find-file’), where REVISION is a parent of the revision that
      added the current line or chunk of lines.
 
 ‘C-c M-g r’ (‘magit-blame-removal’)
 ‘C-c M-g B r’
      This command augments each line or chunk of lines in the current
      blob-visiting buffer with information about the revision that
      removes it.  It cannot be used in file-visiting buffers.
 
      Like ‘magit-blame-addition’, this command can be used recursively.
 
 ‘C-c M-g f’ (‘magit-blame-reverse’)
 ‘C-c M-g B f’
      This command augments each line or chunk of lines in the current
      file-visiting or blob-visiting buffer with information about the
      last revision in which a line still existed.
 
      Like ‘magit-blame-addition’, this command can be used recursively.
 
 ‘C-c M-g e’ (‘magit-blame-echo’)
 ‘C-c M-g B e’
      This command is like ‘magit-blame-addition’ except that it doesn’t
      turn on ‘read-only-mode’ and that it initially uses the
      visualization style specified by option ‘magit-blame-echo-style’.
 
    The following key bindings are available when Magit-Blame mode is
 enabled and Read-Only mode is not enabled.  These commands are also
 available in other buffers; here only the behavior is described that is
 relevant in file-visiting buffers that are being blamed.
 
 ‘C-c M-g q’ (‘magit-blame-quit’)
 ‘C-c M-g B q’
      This command turns off Magit-Blame mode.  If the buffer was created
      during a recursive blame, then it also kills the buffer.
 
 ‘<RET>’ (‘magit-show-commit’)
      This command shows the commit that last touched the line at point.
 
 ‘<SPC>’ (‘magit-diff-show-or-scroll-up’)
      This command updates the commit buffer.
 
      This either shows the commit that last touched the line at point in
      the appropriate buffer, or if that buffer is already being
      displayed in the current frame and if that buffer contains
      information about that commit, then the buffer is scrolled up
      instead.
 
 ‘<DEL>’ (‘magit-diff-show-or-scroll-down’)
      This command updates the commit buffer.
 
      This either shows the commit that last touched the line at point in
      the appropriate buffer, or if that buffer is already being
      displayed in the current frame and if that buffer contains
      information about that commit, then the buffer is scrolled down
      instead.
 
    The following key bindings are available when both Magit-Blame mode
 and Read-Only mode are enabled.
 
 ‘b’ (‘magit-blame’)
      See above.
 
 ‘n’ (‘magit-blame-next-chunk’)
      This command moves to the next chunk.
 
 ‘N’ (‘magit-blame-next-chunk-same-commit’)
      This command moves to the next chunk from the same commit.
 
 ‘p’ (‘magit-blame-previous-chunk’)
      This command moves to the previous chunk.
 
 ‘P’ (‘magit-blame-previous-chunk-same-commit’)
      This command moves to the previous chunk from the same commit.
 
 ‘q’ (‘magit-blame-quit’)
      This command turns off Magit-Blame mode.  If the buffer was created
      during a recursive blame, then it also kills the buffer.
 
 ‘M-w’ (‘magit-blame-copy-hash’)
      This command saves the hash of the current chunk’s commit to the
      kill ring.
 
      When the region is active, the command saves the region’s content
      instead of the hash, like ‘kill-ring-save’ would.
 
 ‘c’ (‘magit-blame-cycle-style’)
      This command changes how blame information is visualized in the
      current buffer by cycling through the styles specified using the
      option ‘magit-blame-styles’.
 
    Blaming is also controlled using the following options.
 
  -- User Option: magit-blame-styles
      This option defines a list of styles used to visualize blame
      information.  For now see its doc-string to learn more.
 
  -- User Option: magit-blame-echo-style
      This option specifies the blame visualization style used by the
      command ‘magit-blame-echo’.  This must be a symbol that is used as
      the identifier for one of the styles defined in
      ‘magit-blame-styles’.
 
  -- User Option: magit-blame-time-format
      This option specifies the format string used to display times when
      showing blame information.
 
  -- User Option: magit-blame-read-only
      This option controls whether blaming a buffer also makes
      temporarily read-only.
 
  -- User Option: magit-blame-disable-modes
      This option lists incompatible minor-modes that should be disabled
      temporarily when a buffer contains blame information.  They are
      enabled again when the buffer no longer shows blame information.
 
  -- User Option: magit-blame-goto-chunk-hook
      This hook is run when moving between chunks.
 
 
 File: magit.info,  Node: Manipulating,  Next: Transferring,  Prev: Inspecting,  Up: Top
 
 6 Manipulating
 **************
 
 * Menu:
 
 * Creating Repository::
 * Cloning Repository::
 * Staging and Unstaging::
 * Applying::
 * Committing::
 * Branching::
 * Merging::
 * Resolving Conflicts::
 * Rebasing::
 * Cherry Picking::
 * Resetting::
 * Stashing::
 
 
 File: magit.info,  Node: Creating Repository,  Next: Cloning Repository,  Up: Manipulating
 
 6.1 Creating Repository
 =======================
 
 ‘I’ (‘magit-init’)
      This command initializes a repository and then shows the status
      buffer for the new repository.
 
      If the directory is below an existing repository, then the user has
      to confirm that a new one should be created inside.  If the
      directory is the root of the existing repository, then the user has
      to confirm that it should be reinitialized.
 
 
 File: magit.info,  Node: Cloning Repository,  Next: Staging and Unstaging,  Prev: Creating Repository,  Up: Manipulating
 
 6.2 Cloning Repository
 ======================
 
 To clone a remote or local repository use ‘C’, which is bound to the
 command ‘magit-clone’.  This command either act as a transient prefix
 command, which binds several infix arguments and suffix commands, or it
 can invoke ‘git clone’ directly, depending on whether a prefix argument
 is used and on the value of ‘magit-clone-always-transient’.
 
  -- User Option: magit-clone-always-transient
      This option controls whether the command ‘magit-clone’ always acts
      as a transient prefix command, regardless of whether a prefix
      argument is used or not.  If ‘t’, then that command always acts as
      a transient prefix.  If ‘nil’, then a prefix argument has to be
      used for it to act as a transient.
 
 ‘C’ (‘magit-clone’)
      This command either acts as a transient prefix command as described
      above or does the same thing as ‘transient-clone-regular’ as
      described below.
 
      If it acts as a transient prefix, then it binds the following
      suffix commands and several infix arguments.
 
 ‘C C’ (‘magit-clone-regular’)
      This command creates a regular clone of an existing repository.
      The repository and the target directory are read from the user.
 
 ‘C s’ (‘magit-clone-shallow’)
      This command creates a shallow clone of an existing repository.
      The repository and the target directory are read from the user.  By
      default the depth of the cloned history is a single commit, but
      with a prefix argument the depth is read from the user.
 
 ‘C >’ (‘magit-clone-sparse’)
      This command creates a clone of an existing repository and
      initializes a sparse checkout, avoiding a checkout of the full
      working tree.  To add more directories, use the
      ‘magit-sparse-checkout’ transient (see *note Sparse checkouts::).
 
 ‘C b’ (‘magit-clone-bare’)
      This command creates a bare clone of an existing repository.  The
      repository and the target directory are read from the user.
 
 ‘C m’ (‘magit-clone-mirror’)
      This command creates a mirror of an existing repository.  The
      repository and the target directory are read from the user.
 
    The following suffixes are disabled by default.  See *note
 (transient)Enabling and Disabling Suffixes:: for how to enable them.
 
 ‘C d’ (‘magit-clone-shallow-since’)
      This command creates a shallow clone of an existing repository.
      Only commits that were committed after a date are cloned, which is
      read from the user.  The repository and the target directory are
      also read from the user.
 
 ‘C e’ (‘magit-clone-shallow-exclude’)
      This command creates a shallow clone of an existing repository.
      This reads a branch or tag from the user.  Commits that are
      reachable from that are not cloned.  The repository and the target
      directory are also read from the user.
 
  -- User Option: magit-clone-set-remote-head
      This option controls whether cloning causes the reference
      ‘refs/remotes/<remote>/HEAD’ to be created in the clone.  The
      default is to delete the reference after running ‘git clone’, which
      insists on creating it.  This is because the reference has not been
      found to be particularly useful as it is not automatically updated
      when the ‘HEAD’ of the remote changes.  Setting this option to ‘t’
      preserves Git’s default behavior of creating the reference.
 
  -- User Option: magit-clone-set-remote.pushDefault
      This option controls whether the value of the Git variable
      ‘remote.pushDefault’ is set after cloning.
 
         • If ‘t’, then it is always set without asking.
         • If ‘ask’, then the users are asked every time they clone a
           repository.
         • If ‘nil’, then it is never set.
 
  -- User Option: magit-clone-default-directory
      This option control the default directory name used when reading
      the destination for a cloning operation.
 
         • If ‘nil’ (the default), then the value of ‘default-directory’
           is used.
         • If a directory, then that is used.
         • If a function, then that is called with the remote url as the
           only argument and the returned value is used.
 
  -- User Option: magit-clone-name-alist
      This option maps regular expressions, which match repository names,
      to repository urls, making it possible for users to enter short
      names instead of urls when cloning repositories.
 
      Each element has the form ‘(REGEXP HOSTNAME USER)’.  When the user
      enters a name when a cloning command asks for a name or url, then
      that is looked up in this list.  The first element whose REGEXP
      matches is used.
 
      The format specified by option ‘magit-clone-url-format’ is used to
      turn the name into an url, using HOSTNAME and the repository name.
      If the provided name contains a slash, then that is used.
      Otherwise if the name omits the owner of the repository, then the
      default user specified in the matched entry is used.
 
      If USER contains a dot, then it is treated as a Git variable and
      the value of that is used as the username.  Otherwise it is used as
      the username itself.
 
  -- User Option: magit-clone-url-format
      The format specified by this option is used when turning repository
      names into urls.  ‘%h’ is the hostname and ‘%n’ is the repository
      name, including the name of the owner.  The value can be a string
      (representing a single static format) or an alist with elements
      ‘(HOSTNAME . FORMAT)’ mapping hostnames to formats.  When an alist
      is used, the ‘t’ key represents the default format.
 
      Example of a single format string:
 
           (setq magit-clone-url-format
                 "git@%h:%n.git")
 
      Example of by-hostname format strings:
 
           (setq magit-clone-url-format
                 '(("git.example.com" . "git@%h:~%n")
                   (nil . "git@%h:%n.git")))
 
  -- User Option: magit-post-clone-hook
      Hook run after the Git process has successfully finished cloning
      the repository.  When the hook is called, ‘default-directory’ is
      let-bound to the directory where the repository has been cloned.
 
 
 File: magit.info,  Node: Staging and Unstaging,  Next: Applying,  Prev: Cloning Repository,  Up: Manipulating
 
 6.3 Staging and Unstaging
 =========================
 
 Like Git, Magit can of course stage and unstage complete files.  Unlike
 Git, it also allows users to gracefully un-/stage individual hunks and
 even just part of a hunk.  To stage individual hunks and parts of hunks
 using Git directly, one has to use the very modal and rather clumsy
 interface of a ‘git add --interactive’ session.
 
    With Magit, on the other hand, one can un-/stage individual hunks by
 just moving point into the respective section inside a diff displayed in
 the status buffer or a separate diff buffer and typing ‘s’ or ‘u’.  To
 operate on just parts of a hunk, mark the changes that should be
 un-/staged using the region and then press the same key that would be
 used to un-/stage.  To stage multiple files or hunks at once use a
 region that starts inside the heading of such a section and ends inside
 the heading of a sibling section of the same type.
 
    Besides staging and unstaging, Magit also provides several other
 "apply variants" that can also operate on a file, multiple files at
 once, a hunk, multiple hunks at once, and on parts of a hunk.  These
 apply variants are described in the next section.
 
    You can also use Ediff to stage and unstage.  See *note Ediffing::.
 
 ‘s’ (‘magit-stage’)
      Add the change at point to the staging area.
 
      With a prefix argument and an untracked file (or files) at point,
      stage the file but not its content.  This makes it possible to
      stage only a subset of the new file’s changes.
 
 ‘S’ (‘magit-stage-modified’)
      Stage all changes to files modified in the worktree.  Stage all new
      content of tracked files and remove tracked files that no longer
      exist in the working tree from the index also.  With a prefix
      argument also stage previously untracked (but not ignored) files.
 
 ‘u’ (‘magit-unstage’)
      Remove the change at point from the staging area.
 
      Only staged changes can be unstaged.  But by default this command
      performs an action that is somewhat similar to unstaging, when it
      is called on a committed change: it reverses the change in the
      index but not in the working tree.
 
 ‘U’ (‘magit-unstage-all’)
      Remove all changes from the staging area.
 
  -- User Option: magit-unstage-committed
      This option controls whether ‘magit-unstage’ "unstages" committed
      changes by reversing them in the index but not the working tree.
      The alternative is to raise an error.
 
 ‘M-x magit-reverse-in-index’
      This command reverses the committed change at point in the index
      but not the working tree.  By default no key is bound directly to
      this command, but it is indirectly called when ‘u’
      (‘magit-unstage’) is pressed on a committed change.
 
      This allows extracting a change from ‘HEAD’, while leaving it in
      the working tree, so that it can later be committed using a
      separate commit.  A typical workflow would be:
 
        1. Optionally make sure that there are no uncommitted changes.
        2. Visit the ‘HEAD’ commit and navigate to the change that should
           not have been included in that commit.
        3. Type ‘u’ (‘magit-unstage’) to reverse it in the index.  This
           assumes that ‘magit-unstage-committed-changes’ is non-nil.
        4. Type ‘c e’ to extend ‘HEAD’ with the staged changes, including
           those that were already staged before.
        5. Optionally stage the remaining changes using ‘s’ or ‘S’ and
           then type ‘c c’ to create a new commit.
 
 ‘M-x magit-reset-index’
      Reset the index to some commit.  The commit is read from the user
      and defaults to the commit at point.  If there is no commit at
      point, then it defaults to ‘HEAD’.
 
 * Menu:
 
 * Staging from File-Visiting Buffers::
 
 
 File: magit.info,  Node: Staging from File-Visiting Buffers,  Up: Staging and Unstaging
 
 6.3.1 Staging from File-Visiting Buffers
 ----------------------------------------
 
 Fine-grained un-/staging has to be done from the status or a diff
 buffer, but it’s also possible to un-/stage all changes made to the file
 visited in the current buffer right from inside that buffer.
 
 ‘M-x magit-stage-file’
      When invoked inside a file-visiting buffer, then stage all changes
      to that file.  In a Magit buffer, stage the file at point if any.
      Otherwise prompt for a file to be staged.  With a prefix argument
      always prompt the user for a file, even in a file-visiting buffer
      or when there is a file section at point.
 
 ‘M-x magit-unstage-file’
      When invoked inside a file-visiting buffer, then unstage all
      changes to that file.  In a Magit buffer, unstage the file at point
      if any.  Otherwise prompt for a file to be unstaged.  With a prefix
      argument always prompt the user for a file, even in a file-visiting
      buffer or when there is a file section at point.
 
 
 File: magit.info,  Node: Applying,  Next: Committing,  Prev: Staging and Unstaging,  Up: Manipulating
 
 6.4 Applying
 ============
 
 Magit provides several "apply variants": stage, unstage, discard,
 reverse, and "regular apply".  At least when operating on a hunk they
 are all implemented using ‘git apply’, which is why they are called
 "apply variants".
 
    • Stage.  Apply a change from the working tree to the index.  The
      change also remains in the working tree.
 
    • Unstage.  Remove a change from the index.  The change remains in
      the working tree.
 
    • Discard.  On a staged change, remove it from the working tree and
      the index.  On an unstaged change, remove it from the working tree
      only.
 
    • Reverse.  Reverse a change in the working tree.  Both committed and
      staged changes can be reversed.  Unstaged changes cannot be
      reversed.  Discard them instead.
 
    • Apply.  Apply a change to the working tree.  Both committed and
      staged changes can be applied.  Unstaged changes cannot be applied
      - as they already have been applied.
 
    The previous section described the staging and unstaging commands.
 What follows are the commands which implement the remaining apply
 variants.
 
 ‘a’ (‘magit-apply’)
      Apply the change at point to the working tree.
 
      With a prefix argument fallback to a 3-way merge.  Doing so causes
      the change to be applied to the index as well.
 
 ‘k’ (‘magit-discard’)
      Remove the change at point from the working tree.
 
      On a hunk or file with unresolved conflicts prompt which side to
      keep (while discarding the other).  If point is within the text of
      a side, then keep that side without prompting.
 
 ‘v’ (‘magit-reverse’)
      Reverse the change at point in the working tree.
 
      With a prefix argument fallback to a 3-way merge.  Doing so causes
      the change to be applied to the index as well.
 
    With a prefix argument all apply variants attempt a 3-way merge when
 appropriate (i.e., when ‘git apply’ is used internally).
 
 
 File: magit.info,  Node: Committing,  Next: Branching,  Prev: Applying,  Up: Manipulating
 
 6.5 Committing
 ==============
 
 When the user initiates a commit, Magit calls ‘git commit’ without any
 arguments, so Git has to get it from the user.  It creates the file
 ‘.git/COMMIT_EDITMSG’ and then opens that file in an editor.  Magit
 arranges for that editor to be the Emacsclient.  Once the user finishes
 the editing session, the Emacsclient exits and Git creates the commit
 using the file’s content as message.
 
 * Menu:
 
 * Initiating a Commit::
 * Editing Commit Messages::
 
 
 File: magit.info,  Node: Initiating a Commit,  Next: Editing Commit Messages,  Up: Committing
 
 6.5.1 Initiating a Commit
 -------------------------
 
 Also see *note (gitman)git-commit::.
 
 ‘c’ (‘magit-commit’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
 ‘c c’ (‘magit-commit-create’)
      Create a new commit on ‘HEAD’.  With a prefix argument amend to the
      commit at ‘HEAD’ instead.
 
 ‘c a’ (‘magit-commit-amend’)
      Amend the last commit.
 
 ‘c e’ (‘magit-commit-extend’)
      Amend the last commit, without editing the message.  With a prefix
      argument keep the committer date, otherwise change it.  The option
      ‘magit-commit-extend-override-date’ can be used to inverse the
      meaning of the prefix argument.
 
      Non-interactively respect the optional OVERRIDE-DATE argument and
      ignore the option.
 
 ‘c w’ (‘magit-commit-reword’)
      Reword the last commit, ignoring staged changes.  With a prefix
      argument keep the committer date, otherwise change it.  The option
      ‘magit-commit-reword-override-date’ can be used to inverse the
      meaning of the prefix argument.
 
      Non-interactively respect the optional OVERRIDE-DATE argument and
      ignore the option.
 
 ‘c f’ (‘magit-commit-fixup’)
      Create a fixup commit.
 
      With a prefix argument the target commit has to be confirmed.
      Otherwise the commit at point may be used without confirmation
      depending on the value of option ‘magit-commit-squash-confirm’.
 
 ‘c F’ (‘magit-commit-instant-fixup’)
      Create a fixup commit and instantly rebase.
 
 ‘c s’ (‘magit-commit-squash’)
      Create a squash commit, without editing the squash message.
 
      With a prefix argument the target commit has to be confirmed.
      Otherwise the commit at point may be used without confirmation
      depending on the value of option ‘magit-commit-squash-confirm’.
 
 ‘c S’ (‘magit-commit-instant-squash’)
      Create a squash commit and instantly rebase.
 
 ‘c A’ (‘magit-commit-augment’)
      Create a squash commit, editing the squash message.
 
      With a prefix argument the target commit has to be confirmed.
      Otherwise the commit at point may be used without confirmation
      depending on the value of option ‘magit-commit-squash-confirm’.
 
  -- User Option: magit-commit-ask-to-stage
      Whether to ask to stage all unstaged changes when committing and
      nothing is staged.
 
  -- User Option: magit-commit-show-diff
      Whether the relevant diff is automatically shown when committing.
 
  -- User Option: magit-commit-extend-override-date
      Whether using ‘magit-commit-extend’ changes the committer date.
 
  -- User Option: magit-commit-reword-override-date
      Whether using ‘magit-commit-reword’ changes the committer date.
 
  -- User Option: magit-commit-squash-confirm
      Whether the commit targeted by squash and fixup has to be
      confirmed.  When non-nil then the commit at point (if any) is used
      as default choice.  Otherwise it has to be confirmed.  This option
      only affects ‘magit-commit-squash’ and ‘magit-commit-fixup’.  The
      "instant" variants always require confirmation because making an
      error while using those is harder to recover from.
 
  -- User Option: magit-post-commit-hook
      Hook run after creating a commit without the user editing a
      message.
 
      This hook is run by ‘magit-refresh’ if ‘this-command’ is a member
      of ‘magit-post-commit-hook-commands’.  This only includes commands
      named ‘magit-commit-*’ that do *not* require that the user edits
      the commit message in a buffer.
 
      Also see ‘git-commit-post-finish-hook’.
 
  -- User Option: magit-commit-diff-inhibit-same-window
      Whether to inhibit use of same window when showing diff while
      committing.
 
      When writing a commit, then a diff of the changes to be committed
      is automatically shown.  The idea is that the diff is shown in a
      different window of the same frame and for most users that just
      works.  In other words most users can completely ignore this option
      because its value doesn’t make a difference for them.
 
      However for users who configured Emacs to never create a new window
      even when the package explicitly tries to do so, then displaying
      two new buffers necessarily means that the first is immediately
      replaced by the second.  In our case the message buffer is
      immediately replaced by the diff buffer, which is of course highly
      undesirable.
 
      A workaround is to suppress this user configuration in this
      particular case.  Users have to explicitly opt-in by toggling this
      option.  We cannot enable the workaround unconditionally because
      that again causes issues for other users: if the frame is too tiny
      or the relevant settings too aggressive, then the diff buffer would
      end up being displayed in a new frame.
 
      Also see <https://github.com/magit/magit/issues/4132>.
 
 
 File: magit.info,  Node: Editing Commit Messages,  Prev: Initiating a Commit,  Up: Committing
 
 6.5.2 Editing Commit Messages
 -----------------------------
 
 After initiating a commit as described in the previous section, two new
 buffers appear.  One shows the changes that are about to be committed,
 while the other is used to write the message.
 
    Commit messages are edited in an edit session - in the background
 ‘git’ is waiting for the editor, in our case ‘emacsclient’, to save the
 commit message in a file (in most cases ‘.git/COMMIT_EDITMSG’) and then
 return.  If the editor returns with a non-zero exit status then ‘git’
 does not create the commit.  So the most important commands are those
 for finishing and aborting the commit.
 
 ‘C-c C-c’ (‘with-editor-finish’)
      Finish the current editing session by returning with exit code 0.
      Git then creates the commit using the message it finds in the file.
 
 ‘C-c C-k’ (‘with-editor-cancel’)
      Cancel the current editing session by returning with exit code 1.
      Git then cancels the commit, but leaves the file untouched.
 
    In addition to being used by ‘git commit’, messages may also be
 stored in a ring that persists until Emacs is closed.  By default the
 message is stored at the beginning and the end of an edit session
 (regardless of whether the session is finished successfully or was
 canceled).  It is sometimes useful to bring back messages from that
 ring.
 
 ‘C-c M-s’ (‘git-commit-save-message’)
      Save the current buffer content to the commit message ring.
 
 ‘M-p’ (‘git-commit-prev-message’)
      Cycle backward through the commit message ring, after saving the
      current message to the ring.  With a numeric prefix ARG, go back
      ARG comments.
 
 ‘M-n’ (‘git-commit-next-message’)
      Cycle forward through the commit message ring, after saving the
      current message to the ring.  With a numeric prefix ARG, go back
      ARG comments.
 
    By default the diff for the changes that are about to be committed
 are automatically shown when invoking the commit.  To prevent that,
 remove ‘magit-commit-diff’ from ‘server-switch-hook’.
 
    When amending to an existing commit it may be useful to show either
 the changes that are about to be added to that commit or to show those
 changes alongside those that have already been committed.
 
 ‘C-c C-d’ (‘magit-diff-while-committing’)
      While committing, show the changes that are about to be committed.
      While amending, invoking the command again toggles between showing
      just the new changes or all the changes that will be committed.
 
 * Menu:
 
 * Using the Revision Stack::
 * Commit Pseudo Headers::
 * Commit Mode and Hooks::
 * Commit Message Conventions::
 
 
 File: magit.info,  Node: Using the Revision Stack,  Next: Commit Pseudo Headers,  Up: Editing Commit Messages
 
 Using the Revision Stack
 ........................
 
 ‘C-c C-w’ (‘magit-pop-revision-stack’)
      This command inserts a representation of a revision into the
      current buffer.  It can be used inside buffers used to write commit
      messages but also in other buffers such as buffers used to edit
      emails or ChangeLog files.
 
      By default this command pops the revision which was last added to
      the ‘magit-revision-stack’ and inserts it into the current buffer
      according to ‘magit-pop-revision-stack-format’.  Revisions can be
      put on the stack using ‘magit-copy-section-value’ and
      ‘magit-copy-buffer-revision’.
 
      If the stack is empty or with a prefix argument it instead reads a
      revision in the minibuffer.  By using the minibuffer history this
      allows selecting an item which was popped earlier or to insert an
      arbitrary reference or revision without first pushing it onto the
      stack.
 
      When reading the revision from the minibuffer, then it might not be
      possible to guess the correct repository.  When this command is
      called inside a repository (e.g., while composing a commit
      message), then that repository is used.  Otherwise (e.g., while
      composing an email) then the repository recorded for the top
      element of the stack is used (even though we insert another
      revision).  If not called inside a repository and with an empty
      stack, or with two prefix arguments, then read the repository in
      the minibuffer too.
 
  -- User Option: magit-pop-revision-stack-format
      This option controls how the command ‘magit-pop-revision-stack’
      inserts a revision into the current buffer.
 
      The entries on the stack have the format ‘(HASH TOPLEVEL)’ and this
      option has the format ‘(POINT-FORMAT EOB-FORMAT INDEX-REGEXP)’, all
      of which may be nil or a string (though either one of EOB-FORMAT or
      POINT-FORMAT should be a string, and if INDEX-REGEXP is non-nil,
      then the two formats should be too).
 
      First INDEX-REGEXP is used to find the previously inserted entry,
      by searching backward from point.  The first submatch must match
      the index number.  That number is incremented by one, and becomes
      the index number of the entry to be inserted.  If you don’t want to
      number the inserted revisions, then use nil for INDEX-REGEXP.
 
      If INDEX-REGEXP is non-nil then both POINT-FORMAT and EOB-FORMAT
      should contain \"%N\", which is replaced with the number that was
      determined in the previous step.
 
      Both formats, if non-nil and after removing %N, are then expanded
      using ‘git show --format=FORMAT ...’ inside TOPLEVEL.
 
      The expansion of POINT-FORMAT is inserted at point, and the
      expansion of EOB-FORMAT is inserted at the end of the buffer (if
      the buffer ends with a comment, then it is inserted right before
      that).
 
 
 File: magit.info,  Node: Commit Pseudo Headers,  Next: Commit Mode and Hooks,  Prev: Using the Revision Stack,  Up: Editing Commit Messages
 
 Commit Pseudo Headers
 .....................
 
 Some projects use pseudo headers in commit messages.  Magit colorizes
 such headers and provides some commands to insert such headers.
 
  -- User Option: git-commit-known-pseudo-headers
      A list of Git pseudo headers to be highlighted.
 
 ‘C-c C-i’ (‘git-commit-insert-pseudo-header’)
      Insert a commit message pseudo header.
 
 ‘C-c C-a’ (‘git-commit-ack’)
      Insert a header acknowledging that you have looked at the commit.
 
 ‘C-c C-r’ (‘git-commit-review’)
      Insert a header acknowledging that you have reviewed the commit.
 
 ‘C-c C-s’ (‘git-commit-signoff’)
      Insert a header to sign off the commit.
 
 ‘C-c C-t’ (‘git-commit-test’)
      Insert a header acknowledging that you have tested the commit.
 
 ‘C-c C-o’ (‘git-commit-cc’)
      Insert a header mentioning someone who might be interested.
 
 ‘C-c C-p’ (‘git-commit-reported’)
      Insert a header mentioning the person who reported the issue being
      fixed by the commit.
 
 ‘C-c M-i’ (‘git-commit-suggested’)
      Insert a header mentioning the person who suggested the change.
 
 
 File: magit.info,  Node: Commit Mode and Hooks,  Next: Commit Message Conventions,  Prev: Commit Pseudo Headers,  Up: Editing Commit Messages
 
 Commit Mode and Hooks
 .....................
 
 ‘git-commit-mode’ is a minor mode that is only used to establish certain
 key bindings.  This makes it possible to use an arbitrary major mode in
 buffers used to edit commit messages.  It is even possible to use
 different major modes in different repositories, which is useful when
 different projects impose different commit message conventions.
 
  -- User Option: git-commit-major-mode
      The value of this option is the major mode used to edit Git commit
      messages.
 
    Because ‘git-commit-mode’ is a minor mode, we don’t use its mode hook
 to setup the buffer, except for the key bindings.  All other setup
 happens in the function ‘git-commit-setup’, which among other things
 runs the hook ‘git-commit-setup-hook’.
 
  -- User Option: git-commit-setup-hook
      Hook run at the end of ‘git-commit-setup’.
 
 The following functions are suitable for this hook:
 
  -- Function: git-commit-save-message
      Save the current buffer content to the commit message ring.
 
  -- Function: git-commit-setup-changelog-support
      After this function is called, ChangeLog entries are treated as
      paragraphs.
 
  -- Function: git-commit-turn-on-auto-fill
      Turn on ‘auto-fill-mode’.
 
  -- Function: git-commit-turn-on-flyspell
      Turn on Flyspell mode.  Also prevent comments from being checked
      and finally check current non-comment text.
 
  -- Function: git-commit-propertize-diff
      Propertize the diff shown inside the commit message buffer.  Git
      inserts such diffs into the commit message template when the
      ‘--verbose’ argument is used.  ‘magit-commit’ by default does not
      offer that argument because the diff that is shown in a separate
      buffer is more useful.  But some users disagree, which is why this
      function exists.
 
  -- Function: bug-reference-mode
      Hyperlink bug references in the buffer.
 
  -- Function: with-editor-usage-message
      Show usage information in the echo area.
 
  -- User Option: git-commit-post-finish-hook
      Hook run after the user finished writing a commit message.
 
      This hook is only run after pressing ‘C-c C-c’ in a buffer used to
      edit a commit message.  If a commit is created without the user
      typing a message into a buffer, then this hook is not run.
 
      This hook is not run until the new commit has been created.  If
      doing so takes Git longer than one second, then this hook isn’t run
      at all.  For certain commands such as ‘magit-rebase-continue’ this
      hook is never run because doing so would lead to a race condition.
 
      This hook is only run if ‘magit’ is available.
 
      Also see ‘magit-post-commit-hook’.
 
 
 File: magit.info,  Node: Commit Message Conventions,  Prev: Commit Mode and Hooks,  Up: Editing Commit Messages
 
 Commit Message Conventions
 ..........................
 
 Git-Commit highlights certain violations of commonly accepted commit
 message conventions.  Certain violations even cause Git-Commit to ask
 you to confirm that you really want to do that.  This nagging can of
 course be turned off, but the result of doing that usually is that
 instead of some code it’s now the human who is reviewing your commits
 who has to waste some time telling you to fix your commits.
 
  -- User Option: git-commit-summary-max-length
      The intended maximal length of the summary line of commit messages.
      Characters beyond this column are colorized to indicate that this
      preference has been violated.
 
  -- User Option: git-commit-finish-query-functions
      List of functions called to query before performing commit.
 
      The commit message buffer is current while the functions are
      called.  If any of them returns nil, then the commit is not
      performed and the buffer is not killed.  The user should then fix
      the issue and try again.
 
      The functions are called with one argument.  If it is non-nil then
      that indicates that the user used a prefix argument to force
      finishing the session despite issues.  Functions should usually
      honor this wish and return non-nil.
 
      By default the only member is ‘git-commit-check-style-conventions’.
 
  -- Function: git-commit-check-style-conventions
      This function checks for violations of certain basic style
      conventions.  For each violation it asks users if they want to
      proceed anyway.
 
  -- User Option: git-commit-style-convention-checks
      This option controls what conventions the function by the same name
      tries to enforce.  The value is a list of self-explanatory symbols
      identifying certain conventions; ‘non-empty-second-line’ and
      ‘overlong-summary-line’.
 
 
 File: magit.info,  Node: Branching,  Next: Merging,  Prev: Committing,  Up: Manipulating
 
 6.6 Branching
 =============
 
 * Menu:
 
 * The Two Remotes::
 * Branch Commands::
 * Branch Git Variables::
 * Auxiliary Branch Commands::
 
 
 File: magit.info,  Node: The Two Remotes,  Next: Branch Commands,  Up: Branching
 
 6.6.1 The Two Remotes
 ---------------------
 
 The upstream branch of some local branch is the branch into which the
 commits on that local branch should eventually be merged, usually
 something like ‘origin/master’.  For the ‘master’ branch itself the
 upstream branch and the branch it is being pushed to, are usually the
 same remote branch.  But for a feature branch the upstream branch and
 the branch it is being pushed to should differ.
 
    The commits on feature branches too should _eventually_ end up in a
 remote branch such as ‘origin/master’ or ‘origin/maint’.  Such a branch
 should therefore be used as the upstream.  But feature branches
 shouldn’t be pushed directly to such branches.  Instead a feature branch
 ‘my-feature’ is usually pushed to ‘my-fork/my-feature’ or if you are a
 contributor ‘origin/my-feature’.  After the new feature has been
 reviewed, the maintainer merges the feature into ‘master’.  And finally
 ‘master’ (not ‘my-feature’ itself) is pushed to ‘origin/master’.
 
    But new features seldom are perfect on the first try, and so feature
 branches usually have to be reviewed, improved, and re-pushed several
 times.  Pushing should therefore be easy to do, and for that reason many
 Git users have concluded that it is best to use the remote branch to
 which the local feature branch is being pushed as its upstream.
 
    But luckily Git has long ago gained support for a push-remote which
 can be configured separately from the upstream branch, using the
 variables ‘branch.<name>.pushRemote’ and ‘remote.pushDefault’.  So we no
 longer have to choose which of the two remotes should be used as "the
 remote".
 
    Each of the fetching, pulling, and pushing transient commands
 features three suffix commands that act on the current branch and some
 other branch.  Of these, ‘p’ is bound to a command which acts on the
 push-remote, ‘u’ is bound to a command which acts on the upstream, and
 ‘e’ is bound to a command which acts on any other branch.  The status
 buffer shows unpushed and unpulled commits for both the push-remote and
 the upstream.
 
    It’s fairly simple to configure these two remotes.  The values of all
 the variables that are related to fetching, pulling, and pushing (as
 well as some other branch-related variables) can be inspected and
 changed using the command ‘magit-branch-configure’, which is available
 from many transient prefix commands that deal with branches.  It is also
 possible to set the push-remote or upstream while pushing (see *note
 Pushing::).
 
 
 File: magit.info,  Node: Branch Commands,  Next: Branch Git Variables,  Prev: The Two Remotes,  Up: Branching
 
 6.6.2 Branch Commands
 ---------------------
 
 The transient prefix command ‘magit-branch’ is used to create and
 checkout branches, and to make changes to existing branches.  It is not
 used to fetch, pull, merge, rebase, or push branches, i.e., this command
 deals with branches themselves, not with the commits reachable from
 them.  Those features are available from separate transient command.
 
 ‘b’ (‘magit-branch’)
      This transient prefix command binds the following suffix commands
      and displays them in a temporary buffer until a suffix is invoked.
 
      By default it also binds and displays the values of some
      branch-related Git variables and allows changing their values.
 
  -- User Option: magit-branch-direct-configure
      This option controls whether the transient command ‘magit-branch’
      can be used to directly change the values of Git variables.  This
      defaults to ‘t’ (to avoid changing key bindings).  When set to
      ‘nil’, then no variables are displayed by that transient command,
      and its suffix command ‘magit-branch-configure’ has to be used
      instead to view and change branch related variables.
 
 ‘b C’ (‘magit-branch-configure’)
 ‘f C’
 ‘F C’
 ‘P C’
      This transient prefix command binds commands that set the value of
      branch-related variables and displays them in a temporary buffer
      until the transient is exited.
 
      With a prefix argument, this command always prompts for a branch.
 
      Without a prefix argument this depends on whether it was invoked as
      a suffix of ‘magit-branch’ and on the
      ‘magit-branch-direct-configure’ option.  If ‘magit-branch’ already
      displays the variables for the current branch, then it isn’t useful
      to invoke another transient that displays them for the same branch.
      In that case this command prompts for a branch.
 
    The variables are described in *note Branch Git Variables::.
 
 ‘b b’ (‘magit-checkout’)
      Checkout a revision read in the minibuffer and defaulting to the
      branch or arbitrary revision at point.  If the revision is a local
      branch then that becomes the current branch.  If it is something
      else then ‘HEAD’ becomes detached.  Checkout fails if the working
      tree or the staging area contain changes.
 
 ‘b n’ (‘magit-branch-create’)
      Create a new branch.  The user is asked for a branch or arbitrary
      revision to use as the starting point of the new branch.  When a
      branch name is provided, then that becomes the upstream branch of
      the new branch.  The name of the new branch is also read in the
      minibuffer.
 
      Also see option ‘magit-branch-prefer-remote-upstream’.
 
 ‘b c’ (‘magit-branch-and-checkout’)
      This command creates a new branch like ‘magit-branch-create’, but
      then also checks it out.
 
      Also see option ‘magit-branch-prefer-remote-upstream’.
 
 ‘b l’ (‘magit-branch-checkout’)
      This command checks out an existing or new local branch.  It reads
      a branch name from the user offering all local branches and a
      subset of remote branches as candidates.  Remote branches for which
      a local branch by the same name exists are omitted from the list of
      candidates.  The user can also enter a completely new branch name.
 
         • If the user selects an existing local branch, then that is
           checked out.
 
         • If the user selects a remote branch, then it creates and
           checks out a new local branch with the same name, and
           configures the selected remote branch as the push target.
 
         • If the user enters a new branch name, then it creates and
           checks that out, after also reading the starting-point from
           the user.
 
      In the latter two cases the upstream is also set.  Whether it is
      set to the chosen starting point or something else depends on the
      value of ‘magit-branch-adjust-remote-upstream-alist’.
 
 ‘b s’ (‘magit-branch-spinoff’)
      This command creates and checks out a new branch starting at and
      tracking the current branch.  That branch in turn is reset to the
      last commit it shares with its upstream.  If the current branch has
      no upstream or no unpushed commits, then the new branch is created
      anyway and the previously current branch is not touched.
 
      This is useful to create a feature branch after work has already
      began on the old branch (likely but not necessarily "master").
 
      If the current branch is a member of the value of option
      ‘magit-branch-prefer-remote-upstream’ (which see), then the current
      branch will be used as the starting point as usual, but the
      upstream of the starting-point may be used as the upstream of the
      new branch, instead of the starting-point itself.
 
      If optional FROM is non-nil, then the source branch is reset to
      ‘FROM~’, instead of to the last commit it shares with its upstream.
      Interactively, FROM is only ever non-nil, if the region selects
      some commits, and among those commits, FROM is the commit that is
      the fewest commits ahead of the source branch.
 
      The commit at the other end of the selection actually does not
      matter, all commits between FROM and ‘HEAD’ are moved to the new
      branch.  If FROM is not reachable from ‘HEAD’ or is reachable from
      the source branch’s upstream, then an error is raised.
 
 ‘b S’ (‘magit-branch-spinout’)
      This command behaves like ‘magit-branch-spinoff’, except that it
      does not change the current branch.  If there are any uncommitted
      changes, then it behaves exactly like ‘magit-branch-spinoff’.
 
 ‘b x’ (‘magit-branch-reset’)
      This command resets a branch, defaulting to the branch at point, to
      the tip of another branch or any other commit.
 
      When the branch being reset is the current branch, then a hard
      reset is performed.  If there are any uncommitted changes, then the
      user has to confirm the reset because those changes would be lost.
 
      This is useful when you have started work on a feature branch but
      realize it’s all crap and want to start over.
 
      When resetting to another branch and a prefix argument is used,
      then the target branch is set as the upstream of the branch that is
      being reset.
 
 ‘b k’ (‘magit-branch-delete’)
      Delete one or multiple branches.  If the region marks multiple
      branches, then offer to delete those.  Otherwise, prompt for a
      single branch to be deleted, defaulting to the branch at point.
 
      Require confirmation when deleting branches is dangerous in some
      way.  Option ‘magit-no-confirm’ can be customized to not require
      confirmation in certain cases.  See its docstring to learn why
      confirmation is required by default in certain cases or if a prompt
      is confusing.
 
 ‘b m’ (‘magit-branch-rename’)
      Rename a branch.  The branch and the new name are read in the
      minibuffer.  With prefix argument the branch is renamed even if
      that name conflicts with an existing branch.
 
  -- User Option: magit-branch-read-upstream-first
      When creating a branch, whether to read the upstream branch before
      the name of the branch that is to be created.  The default is ‘t’,
      and I recommend you leave it at that.
 
  -- User Option: magit-branch-prefer-remote-upstream
      This option specifies whether remote upstreams are favored over
      local upstreams when creating new branches.
 
      When a new branch is created, then the branch, commit, or stash at
      point is suggested as the starting point of the new branch, or if
      there is no such revision at point the current branch.  In either
      case the user may choose another starting point.
 
      If the chosen starting point is a branch, then it may also be set
      as the upstream of the new branch, depending on the value of the
      Git variable ‘branch.autoSetupMerge’.  By default this is done for
      remote branches, but not for local branches.
 
      You might prefer to always use some remote branch as upstream.  If
      the chosen starting point is (1) a local branch, (2) whose name
      matches a member of the value of this option, (3) the upstream of
      that local branch is a remote branch with the same name, and (4)
      that remote branch can be fast-forwarded to the local branch, then
      the chosen branch is used as starting point, but its own upstream
      is used as the upstream of the new branch.
 
      Members of this option’s value are treated as branch names that
      have to match exactly unless they contain a character that makes
      them invalid as a branch name.  Recommended characters to use to
      trigger interpretation as a regexp are "*" and "^".  Some other
      characters which you might expect to be invalid, actually are not,
      e.g., ".+$" are all perfectly valid.  More precisely, if ‘git
      check-ref-format --branch STRING’ exits with a non-zero status,
      then treat STRING as a regexp.
 
      Assuming the chosen branch matches these conditions you would end
      up with with e.g.:
 
           feature --upstream--> origin/master
 
      instead of
 
           feature --upstream--> master --upstream--> origin/master
 
      Which you prefer is a matter of personal preference.  If you do
      prefer the former, then you should add branches such as ‘master’,
      ‘next’, and ‘maint’ to the value of this options.
 
  -- User Option: magit-branch-adjust-remote-upstream-alist
      The value of this option is an alist of branches to be used as the
      upstream when branching a remote branch.
 
      When creating a local branch from an ephemeral branch located on a
      remote, e.g., a feature or hotfix branch, then that remote branch
      should usually not be used as the upstream branch, since the
      push-remote already allows accessing it and having both the
      upstream and the push-remote reference the same related branch
      would be wasteful.  Instead a branch like "maint" or "master"
      should be used as the upstream.
 
      This option allows specifying the branch that should be used as the
      upstream when branching certain remote branches.  The value is an
      alist of the form ‘((UPSTREAM . RULE)...)’.  The first matching
      element is used, the following elements are ignored.
 
      UPSTREAM is the branch to be used as the upstream for branches
      specified by RULE.  It can be a local or a remote branch.
 
      RULE can either be a regular expression, matching branches whose
      upstream should be the one specified by UPSTREAM.  Or it can be a
      list of the only branches that should *not* use UPSTREAM; all other
      branches will.  Matching is done after stripping the remote part of
      the name of the branch that is being branched from.
 
      If you use a finite set of non-ephemeral branches across all your
      repositories, then you might use something like:
 
           (("origin/master" . ("master" "next" "maint")))
 
      Or if the names of all your ephemeral branches contain a slash, at
      least in some repositories, then a good value could be:
 
           (("origin/master" . "/"))
 
      Of course you can also fine-tune:
 
           (("origin/maint" . "\\`hotfix/")
            ("origin/master" . "\\`feature/"))
 
      UPSTREAM can be a local branch:
 
           (("master" . ("master" "next" "maint")))
 
    Because the main branch is no longer almost always named "master" you
 should also account for other common names:
 
      (("main"  . ("main" "master" "next" "maint"))
       ("master" . ("main" "master" "next" "maint")))
 
  -- Command: magit-branch-orphan
      This command creates and checks out a new orphan branch with
      contents from a given revision.
 
  -- Command: magit-branch-or-checkout
      This command is a hybrid between ‘magit-checkout’ and
      ‘magit-branch-and-checkout’ and is intended as a replacement for
      the former in ‘magit-branch’.
 
      It first asks the user for an existing branch or revision.  If the
      user input actually can be resolved as a branch or revision, then
      it checks that out, just like ‘magit-checkout’ would.
 
      Otherwise it creates and checks out a new branch using the input as
      its name.  Before doing so it reads the starting-point for the new
      branch.  This is similar to what ‘magit-branch-and-checkout’ does.
 
      To use this command instead of ‘magit-checkout’ add this to your
      init file:
 
           (transient-replace-suffix 'magit-branch 'magit-checkout
             '("b" "dwim" magit-branch-or-checkout))
 
 
 File: magit.info,  Node: Branch Git Variables,  Next: Auxiliary Branch Commands,  Prev: Branch Commands,  Up: Branching
 
 6.6.3 Branch Git Variables
 --------------------------
 
 These variables can be set from the transient prefix command
 ‘magit-branch-configure’.  By default they can also be set from
 ‘magit-branch’.  See *note Branch Commands::.
 
  -- Variable: branch.NAME.merge
      Together with ‘branch.NAME.remote’ this variable defines the
      upstream branch of the local branch named NAME.  The value of this
      variable is the full reference of the upstream _branch_.
 
  -- Variable: branch.NAME.remote
      Together with ‘branch.NAME.merge’ this variable defines the
      upstream branch of the local branch named NAME.  The value of this
      variable is the name of the upstream _remote_.
 
  -- Variable: branch.NAME.rebase
      This variable controls whether pulling into the branch named NAME
      is done by rebasing or by merging the fetched branch.
 
         • When ‘true’ then pulling is done by rebasing.
         • When ‘false’ then pulling is done by merging.
         • When undefined then the value of ‘pull.rebase’ is used.  The
           default of that variable is ‘false’.
 
  -- Variable: branch.NAME.pushRemote
      This variable specifies the remote that the branch named NAME is
      usually pushed to.  The value has to be the name of an existing
      remote.
 
      It is not possible to specify the name of _branch_ to push the
      local branch to.  The name of the remote branch is always the same
      as the name of the local branch.
 
      If this variable is undefined but ‘remote.pushDefault’ is defined,
      then the value of the latter is used.  By default
      ‘remote.pushDefault’ is undefined.
 
  -- Variable: branch.NAME.description
      This variable can be used to describe the branch named NAME.  That
      description is used, e.g., when turning the branch into a series of
      patches.
 
    The following variables specify defaults which are used if the above
 branch-specific variables are not set.
 
  -- Variable: pull.rebase
      This variable specifies whether pulling is done by rebasing or by
      merging.  It can be overwritten using ‘branch.NAME.rebase’.
 
         • When ‘true’ then pulling is done by rebasing.
         • When ‘false’ (the default) then pulling is done by merging.
 
      Since it is never a good idea to merge the upstream branch into a
      feature or hotfix branch and most branches are such branches, you
      should consider setting this to ‘true’, and ‘branch.master.rebase’
      to ‘false’.
 
  -- Variable: remote.pushDefault
      This variable specifies what remote the local branches are usually
      pushed to.  This can be overwritten per branch using
      ‘branch.NAME.pushRemote’.
 
    The following variables are used during the creation of a branch and
 control whether the various branch-specific variables are automatically
 set at this time.
 
  -- Variable: branch.autoSetupMerge
      This variable specifies under what circumstances creating a branch
      NAME should result in the variables ‘branch.NAME.merge’ and
      ‘branch.NAME.remote’ being set according to the starting point used
      to create the branch.  If the starting point isn’t a branch, then
      these variables are never set.
 
         • When ‘always’ then the variables are set regardless of whether
           the starting point is a local or a remote branch.
         • When ‘true’ (the default) then the variables are set when the
           starting point is a remote branch, but not when it is a local
           branch.
         • When ‘false’ then the variables are never set.
 
  -- Variable: branch.autoSetupRebase
      This variable specifies whether creating a branch NAME should
      result in the variable ‘branch.NAME.rebase’ being set to ‘true’.
 
         • When ‘always’ then the variable is set regardless of whether
           the starting point is a local or a remote branch.
         • When ‘local’ then the variable are set when the starting point
           is a local branch, but not when it is a remote branch.
         • When ‘remote’ then the variable are set when the starting
           point is a remote branch, but not when it is a local branch.
         • When ‘never’ (the default) then the variable is never set.
 
    Note that the respective commands always change the repository-local
 values.  If you want to change the global value, which is used when the
 local value is undefined, then you have to do so on the command line,
 e.g.:
 
      git config --global remote.autoSetupMerge always
 
    For more information about these variables you should also see
 
    *note (gitman)git-config::.  Also see *note (gitman)git-branch::.  ,
 *note (gitman)git-checkout::.  and *note Pushing::.
 
  -- User Option: magit-prefer-remote-upstream
      This option controls whether commands that read a branch from the
      user and then set it as the upstream branch, offer a local or a
      remote branch as default completion candidate, when they have the
      choice.
 
      This affects all commands that use ‘magit-read-upstream-branch’ or
      ‘magit-read-starting-point’, which includes all commands that
      change the upstream and many which create new branches.
 
 
 File: magit.info,  Node: Auxiliary Branch Commands,  Prev: Branch Git Variables,  Up: Branching
 
 6.6.4 Auxiliary Branch Commands
 -------------------------------
 
 These commands are not available from the transient ‘magit-branch’ by
 default.
 
  -- Command: magit-branch-shelve
      This command shelves a branch.  This is done by deleting the
      branch, and creating a new reference "refs/shelved/BRANCH-NAME"
      pointing at the same commit as the branch pointed at.  If the
      deleted branch had a reflog, then that is preserved as the reflog
      of the new reference.
 
      This is useful if you want to move a branch out of sight, but are
      not ready to completely discard it yet.
 
  -- Command: magit-branch-unshelve
      This command unshelves a branch that was previously shelved using
      ‘magit-branch-shelve’.  This is done by deleting the reference
      "refs/shelved/BRANCH-NAME" and creating a branch "BRANCH-NAME"
      pointing at the same commit as the deleted reference pointed at.
      If the deleted reference had a reflog, then that is restored as the
      reflog of the branch.
 
 
 File: magit.info,  Node: Merging,  Next: Resolving Conflicts,  Prev: Branching,  Up: Manipulating
 
 6.7 Merging
 ===========
 
 Also see *note (gitman)git-merge::.  For information on how to resolve
 merge conflicts see the next section.
 
 ‘m’ (‘magit-merge’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
    When no merge is in progress, then the transient features the
 following suffix commands.
 
 ‘m m’ (‘magit-merge-plain’)
      This command merges another branch or an arbitrary revision into
      the current branch.  The branch or revision to be merged is read in
      the minibuffer and defaults to the branch at point.
 
      Unless there are conflicts or a prefix argument is used, then the
      resulting merge commit uses a generic commit message, and the user
      does not get a chance to inspect or change it before the commit is
      created.  With a prefix argument this does not actually create the
      merge commit, which makes it possible to inspect how conflicts were
      resolved and to adjust the commit message.
 
 ‘m e’ (‘magit-merge-editmsg’)
      This command merges another branch or an arbitrary revision into
      the current branch and opens a commit message buffer, so that the
      user can make adjustments.  The commit is not actually created
      until the user finishes with ‘C-c C-c’.
 
 ‘m n’ (‘magit-merge-nocommit’)
      This command merges another branch or an arbitrary revision into
      the current branch, but does not actually create the merge commit.
      The user can then further adjust the merge, even when automatic
      conflict resolution succeeded and/or adjust the commit message.
 
 ‘m a’ (‘magit-merge-absorb’)
      This command merges another local branch into the current branch
      and then removes the former.
 
      Before the source branch is merged, it is first force pushed to its
      push-remote, provided the respective remote branch already exists.
      This ensures that the respective pull-request (if any) won’t get
      stuck on some obsolete version of the commits that are being
      merged.  Finally, if ‘magit-branch-pull-request’ was used to create
      the merged branch, then the respective remote branch is also
      removed.
 
 ‘m i’ (‘magit-merge-into’)
      This command merges the current branch into another local branch
      and then removes the former.  The latter becomes the new current
      branch.
 
      Before the source branch is merged, it is first force pushed to its
      push-remote, provided the respective remote branch already exists.
      This ensures that the respective pull-request (if any) won’t get
      stuck on some obsolete version of the commits that are being
      merged.  Finally, if ‘magit-branch-pull-request’ was used to create
      the merged branch, then the respective remote branch is also
      removed.
 
 ‘m s’ (‘magit-merge-squash’)
      This command squashes the changes introduced by another branch or
      an arbitrary revision into the current branch.  This only applies
      the changes made by the squashed commits.  No information is
      preserved that would allow creating an actual merge commit.
      Instead of this command you should probably use a command from the
      apply transient.
 
 ‘m p’ (‘magit-merge-preview’)
      This command shows a preview of merging another branch or an
      arbitrary revision into the current branch.
 
      Note that commands, that normally change how a diff is displayed,
      do not work in buffers created by this command, because the
      underlying Git command does not support diff arguments.
 
    When a merge is in progress, then the transient instead features the
 following suffix commands.
 
 ‘m m’ (‘magit-merge’)
      After the user resolved conflicts, this command proceeds with the
      merge.  If some conflicts weren’t resolved, then this command
      fails.
 
 ‘m a’ (‘magit-merge-abort’)
      This command aborts the current merge operation.
 
 
 File: magit.info,  Node: Resolving Conflicts,  Next: Rebasing,  Prev: Merging,  Up: Manipulating
 
 6.8 Resolving Conflicts
 =======================
 
 When merging branches (or otherwise combining or changing history)
 conflicts can occur.  If you edited two completely different parts of
 the same file in two branches and then merge one of these branches into
 the other, then Git can resolve that on its own, but if you edit the
 same area of a file, then a human is required to decide how the two
 versions, or "sides of the conflict", are to be combined into one.
 
    Here we can only provide a brief introduction to the subject and
 point you toward some tools that can help.  If you are new to this, then
 please also consult Git’s own documentation as well as other resources.
 
    If a file has conflicts and Git cannot resolve them by itself, then
 it puts both versions into the affected file along with special markers
 whose purpose is to denote the boundaries of the unresolved part of the
 file and between the different versions.  These boundary lines begin
 with the strings consisting of seven times the same character, one of
 ‘<’, ‘|’, ‘=’ and ‘>’, and are followed by information about the source
 of the respective versions, e.g.:
 
      <<<<<<< HEAD
      Take the blue pill.
      =======
      Take the red pill.
      >>>>>>> feature
 
    In this case you have chosen to take the red pill on one branch and
 on another you picked the blue pill.  Now that you are merging these two
 diverging branches, Git cannot possibly know which pill you want to
 take.
 
    To resolve that conflict you have to create a version of the affected
 area of the file by keeping only one of the sides, possibly by editing
 it in order to bring in the changes from the other side, remove the
 other versions as well as the markers, and then stage the result.  A
 possible resolution might be:
 
      Take both pills.
 
    Often it is useful to see not only the two sides of the conflict but
 also the "original" version from before the same area of the file was
 modified twice on different branches.  Instruct Git to insert that
 version as well by running this command once:
 
      git config --global merge.conflictStyle diff3
 
    The above conflict might then have looked like this:
 
      <<<<<<< HEAD
      Take the blue pill.
      ||||||| merged common ancestors
      Take either the blue or the red pill, but not both.
      =======
      Take the red pill.
      >>>>>>> feature
 
    If that were the case, then the above conflict resolution would not
 have been correct, which demonstrates why seeing the original version
 alongside the conflicting versions can be useful.
 
    You can perform the conflict resolution completely by hand, but Emacs
 also provides some packages that help in the process: Smerge, Ediff
 (*note (ediff)Top::), and Emerge (*note (emacs)Emerge::).  Magit does
 not provide its own tools for conflict resolution, but it does make
 using Smerge and Ediff more convenient.  (Ediff supersedes Emerge, so
 you probably don’t want to use the latter anyway.)
 
    In the Magit status buffer, files with unresolved conflicts are
 listed in the "Unstaged changes" and/or "Staged changes" sections.  They
 are prefixed with the word "unmerged", which in this context essentially
 is a synonym for "unresolved".
 
    Pressing ‘RET’ while point is on such a file section shows a buffer
 visiting that file, turns on ‘smerge-mode’ in that buffer, and places
 point inside the first area with conflicts.  You should then resolve
 that conflict using regular edit commands and/or Smerge commands.
 
    Unfortunately Smerge does not have a manual, but you can get a list
 of commands and binding ‘C-c ^ C-h’ and press ‘RET’ while point is on a
 command name to read its documentation.
 
    Normally you would edit one version and then tell Smerge to keep only
 that version.  Use ‘C-c ^ m’ (‘smerge-keep-mine’) to keep the ‘HEAD’
 version or ‘C-c ^ o’ (‘smerge-keep-other’) to keep the version that
 follows "|||||||".  Then use ‘C-c ^ n’ to move to the next conflicting
 area in the same file.  Once you are done resolving conflicts, return to
 the Magit status buffer.  The file should now be shown as "modified", no
 longer as "unmerged", because Smerge automatically stages the file when
 you save the buffer after resolving the last conflict.
 
    Magit now wraps the mentioned Smerge commands, allowing you to use
 these key bindings without having to go to the file-visiting buffer.
 Additionally ‘k’ (‘magit-discard’) on a hunk with unresolved conflicts
 asks which side to keep or, if point is on a side, then it keeps it
 without prompting.  Similarly ‘k’ on a unresolved file ask which side to
 keep.
 
    Alternatively you could use Ediff, which uses separate buffers for
 the different versions of the file.  To resolve conflicts in a file
 using Ediff press ‘e’ while point is on such a file in the status
 buffer.
 
    Ediff can be used for other purposes as well.  For more information
 on how to enter Ediff from Magit, see *note Ediffing::.  Explaining how
 to use Ediff is beyond the scope of this manual, instead see *note
 (ediff)Top::.
 
    If you are unsure whether you should Smerge or Ediff, then use the
 former.  It is much easier to understand and use, and except for truly
 complex conflicts, the latter is usually overkill.
 
 
 File: magit.info,  Node: Rebasing,  Next: Cherry Picking,  Prev: Resolving Conflicts,  Up: Manipulating
 
 6.9 Rebasing
 ============
 
 Also see *note (gitman)git-rebase::.  For information on how to resolve
 conflicts that occur during rebases see the preceding section.
 
 ‘r’ (‘magit-rebase’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
    When no rebase is in progress, then the transient features the
 following suffix commands.
 
    Using one of these commands _starts_ a rebase sequence.  Git might
 then stop somewhere along the way, either because you told it to do so,
 or because applying a commit failed due to a conflict.  When that
 happens, then the status buffer shows information about the rebase
 sequence which is in progress in a section similar to a log section.
 See *note Information About In-Progress Rebase::.
 
    For information about the upstream and the push-remote, see *note The
 Two Remotes::.
 
 ‘r p’ (‘magit-rebase-onto-pushremote’)
      This command rebases the current branch onto its push-remote.
 
      With a prefix argument or when the push-remote is either not
      configured or unusable, then let the user first configure the
      push-remote.
 
 ‘r u’ (‘magit-rebase-onto-upstream’)
      This command rebases the current branch onto its upstream branch.
 
      With a prefix argument or when the upstream is either not
      configured or unusable, then let the user first configure the
      upstream.
 
 ‘r e’ (‘magit-rebase-branch’)
      This command rebases the current branch onto a branch read in the
      minibuffer.  All commits that are reachable from head but not from
      the selected branch TARGET are being rebased.
 
 ‘r s’ (‘magit-rebase-subset’)
      This command starts a non-interactive rebase sequence to transfer
      commits from START to ‘HEAD’ onto NEWBASE.  START has to be
      selected from a list of recent commits.
 
    By default Magit uses the ‘--autostash’ argument, which causes
 uncommitted changes to be stored in a stash before the rebase begins.
 These changes are restored after the rebase completes and if possible
 the stash is removed.  If the stash does not apply cleanly, then the
 stash is not removed.  In case something goes wrong when resolving the
 conflicts, this allows you to start over.
 
    Even though one of the actions is dedicated to interactive rebases,
 the transient also features the infix argument ‘--interactive’.  This
 can be used to turn one of the other, non-interactive rebase variants
 into an interactive rebase.
 
    For example if you want to clean up a feature branch and at the same
 time rebase it onto ‘master’, then you could use ‘r-iu’.  But we
 recommend that you instead do that in two steps.  First use ‘ri’ to
 cleanup the feature branch, and then in a second step ‘ru’ to rebase it
 onto ‘master’.  That way if things turn out to be more complicated than
 you thought and/or you make a mistake and have to start over, then you
 only have to redo half the work.
 
    Explicitly enabling ‘--interactive’ won’t have an effect on the
 following commands as they always use that argument anyway, even if it
 is not enabled in the transient.
 
 ‘r i’ (‘magit-rebase-interactive’)
      This command starts an interactive rebase sequence.
 
 ‘r f’ (‘magit-rebase-autosquash’)
      This command combines squash and fixup commits with their intended
      targets.
 
 ‘r m’ (‘magit-rebase-edit-commit’)
      This command starts an interactive rebase sequence that lets the
      user edit a single older commit.
 
 ‘r w’ (‘magit-rebase-reword-commit’)
      This command starts an interactive rebase sequence that lets the
      user reword a single older commit.
 
 ‘r k’ (‘magit-rebase-remove-commit’)
      This command removes a single older commit using rebase.
 
    When a rebase is in progress, then the transient instead features the
 following suffix commands.
 
 ‘r r’ (‘magit-rebase-continue’)
      This command restart the current rebasing operation.
 
      In some cases this pops up a commit message buffer for you do edit.
      With a prefix argument the old message is reused as-is.
 
 ‘r s’ (‘magit-rebase-skip’)
      This command skips the current commit and restarts the current
      rebase operation.
 
 ‘r e’ (‘magit-rebase-edit’)
      This command lets the user edit the todo list of the current rebase
      operation.
 
 ‘r a’ (‘magit-rebase-abort’)
      This command aborts the current rebase operation, restoring the
      original branch.
 
 * Menu:
 
 * Editing Rebase Sequences::
 * Information About In-Progress Rebase::
 
 
 File: magit.info,  Node: Editing Rebase Sequences,  Next: Information About In-Progress Rebase,  Up: Rebasing
 
 6.9.1 Editing Rebase Sequences
 ------------------------------
 
 ‘C-c C-c’ (‘with-editor-finish’)
      Finish the current editing session by returning with exit code 0.
      Git then uses the rebase instructions it finds in the file.
 
 ‘C-c C-k’ (‘with-editor-cancel’)
      Cancel the current editing session by returning with exit code 1.
      Git then forgoes starting the rebase sequence.
 
 ‘<RET>’ (‘git-rebase-show-commit’)
      Show the commit on the current line in another buffer and select
      that buffer.
 
 ‘<SPC>’ (‘git-rebase-show-or-scroll-up’)
      Show the commit on the current line in another buffer without
      selecting that buffer.  If the revision buffer is already visible
      in another window of the current frame, then instead scroll that
      window up.
 
 ‘<DEL>’ (‘git-rebase-show-or-scroll-down’)
      Show the commit on the current line in another buffer without
      selecting that buffer.  If the revision buffer is already visible
      in another window of the current frame, then instead scroll that
      window down.
 
 ‘p’ (‘git-rebase-backward-line’)
      Move to previous line.
 
 ‘n’ (‘forward-line’)
      Move to next line.
 
 ‘M-p’ (‘git-rebase-move-line-up’)
      Move the current commit (or command) up.
 
 ‘M-n’ (‘git-rebase-move-line-down’)
      Move the current commit (or command) down.
 
 ‘r’ (‘git-rebase-reword’)
      Edit message of commit on current line.
 
 ‘e’ (‘git-rebase-edit’)
      Stop at the commit on the current line.
 
 ‘s’ (‘git-rebase-squash’)
      Meld commit on current line into previous commit, and edit message.
 
 ‘f’ (‘git-rebase-fixup’)
      Meld commit on current line into previous commit, discarding the
      current commit’s message.
 
 ‘k’ (‘git-rebase-kill-line’)
      Kill the current action line.
 
 ‘c’ (‘git-rebase-pick’)
      Use commit on current line.
 
 ‘x’ (‘git-rebase-exec’)
      Insert a shell command to be run after the proceeding commit.
 
      If there already is such a command on the current line, then edit
      that instead.  With a prefix argument insert a new command even
      when there already is one on the current line.  With empty input
      remove the command on the current line, if any.
 
 ‘b’ (‘git-rebase-break’)
      Insert a break action before the current line, instructing Git to
      return control to the user.
 
 ‘y’ (‘git-rebase-insert’)
      Read an arbitrary commit and insert it below current line.
 
 ‘C-x u’ (‘git-rebase-undo’)
      Undo some previous changes.  Like ‘undo’ but works in read-only
      buffers.
 
  -- User Option: git-rebase-auto-advance
      Whether to move to next line after changing a line.
 
  -- User Option: git-rebase-show-instructions
      Whether to show usage instructions inside the rebase buffer.
 
  -- User Option: git-rebase-confirm-cancel
      Whether confirmation is required to cancel.
 
    When a rebase is performed with the ‘--rebase-merges’ option, the
 sequence will include a few other types of actions and the following
 commands become relevant.
 
 ‘l’ (‘git-rebase-label’)
      This commands inserts a label action or edits the one at point.
 
 ‘t’ (‘git-rebase-reset’)
      This command inserts a reset action or edits the one at point.  The
      prompt will offer the labels that are currently present in the
      buffer.
 
 ‘MM’ (‘git-rebase-merge’)
      The command inserts a merge action or edits the one at point.  The
      prompt will offer the labels that are currently present in the
      buffer.  Specifying a message to reuse via ‘-c’ or ‘-C’ is not
      supported; an editor will always be invoked for the merge.
 
 ‘Mt’ (‘git-rebase-merge-toggle-editmsg’)
      This command toggles between the ‘-C’ and ‘-c’ options of the merge
      action at point.  These options both specify a commit whose message
      should be reused.  The lower-case variant instructs Git to invoke
      the editor when creating the merge, allowing the user to edit the
      message.
 
 
 File: magit.info,  Node: Information About In-Progress Rebase,  Prev: Editing Rebase Sequences,  Up: Rebasing
 
 6.9.2 Information About In-Progress Rebase
 ------------------------------------------
 
 While a rebase sequence is in progress, the status buffer features a
 section that lists the commits that have already been applied as well as
 the commits that still have to be applied.
 
    The commits are split in two halves.  When rebase stops at a commit,
 either because the user has to deal with a conflict or because s/he
 explicitly requested that rebase stops at that commit, then point is
 placed on the commit that separates the two groups, i.e., on ‘HEAD’.
 The commits above it have not been applied yet, while the ‘HEAD’ and the
 commits below it have already been applied.  In between these two groups
 of applied and yet-to-be applied commits, there sometimes is a commit
 which has been dropped.
 
    Each commit is prefixed with a word and these words are additionally
 shown in different colors to indicate the status of the commits.
 
    The following colors are used:
 
    • Commits that use the same foreground color as the ‘default’ face
      have not been applied yet.
 
    • Yellow commits have some special relationship to the commit rebase
      stopped at.  This is used for the words "join", "goal", "same" and
      "work" (see below).
 
    • Gray commits have already been applied.
 
    • The blue commit is the ‘HEAD’ commit.
 
    • The green commit is the commit the rebase sequence stopped at.  If
      this is the same commit as ‘HEAD’ (e.g., because you haven’t done
      anything yet after rebase stopped at the commit, then this commit
      is shown in blue, not green).  There can only be a green *and* a
      blue commit at the same time, if you create one or more new commits
      after rebase stops at a commit.
 
    • Red commits have been dropped.  They are shown for reference only,
      e.g., to make it easier to diff.
 
    Of course these colors are subject to the color-theme in use.
 
    The following words are used:
 
    • Commits prefixed with ‘pick’, ‘reword’, ‘edit’, ‘squash’, and
      ‘fixup’ have not been applied yet.  These words have the same
      meaning here as they do in the buffer used to edit the rebase
      sequence.  See *note Editing Rebase Sequences::.  When the
      ‘--rebase-merges’ option was specified, ‘reset’, ‘label’, and
      ‘merge’ lines may also be present.
 
    • Commits prefixed with ‘done’ and ‘onto’ have already been applied.
      It is possible for such a commit to be the ‘HEAD’, in which case it
      is blue.  Otherwise it is grey.
 
         • The commit prefixed with ‘onto’ is the commit on top of which
           all the other commits are being re-applied.  This commit
           itself did not have to be re-applied, it is the commit rebase
           did rewind to before starting to re-apply other commits.
 
         • Commits prefixed with ‘done’ have already been re-applied.
           This includes commits that have been re-applied but also new
           commits that you have created during the rebase.
 
    • All other commits, those not prefixed with any of the above words,
      are in some way related to the commit at which rebase stopped.
 
      To determine whether a commit is related to the stopped-at commit
      their hashes, trees and patch-ids (1) are being compared.  The
      commit message is not used for this purpose.
 
      Generally speaking commits that are related to the stopped-at
      commit can have any of the used colors, though not all color/word
      combinations are possible.
 
      Words used for stopped-at commits are:
 
         • When a commit is prefixed with ‘void’, then that indicates
           that Magit knows for sure that all the changes in that commit
           have been applied using several new commits.  This commit is
           no longer reachable from ‘HEAD’, and it also isn’t one of the
           commits that will be applied when resuming the session.
 
         • When a commit is prefixed with ‘join’, then that indicates
           that the rebase sequence stopped at that commit due to a
           conflict - you now have to join (merge) the changes with what
           has already been applied.  In a sense this is the commit
           rebase stopped at, but while its effect is already in the
           index and in the worktree (with conflict markers), the commit
           itself has not actually been applied yet (it isn’t the
           ‘HEAD’).  So it is shown in yellow, like the other commits
           that still have to be applied.
 
         • When a commit is prefixed with ‘stop’ or a _blue_ or _green_
           ‘same’, then that indicates that rebase stopped at this
           commit, that it is still applied or has been applied again,
           and that at least its patch-id is unchanged.
 
              • When a commit is prefixed with ‘stop’, then that
                indicates that rebase stopped at that commit because you
                requested that earlier, and its patch-id is unchanged.
                It might even still be the exact same commit.
 
              • When a commit is prefixed with a _blue_ or _green_
                ‘same’, then that indicates that while its tree or hash
                changed, its patch-id did not.  If it is blue, then it is
                the ‘HEAD’ commit (as always for blue).  When it is
                green, then it no longer is ‘HEAD’ because other commit
                have been created since (but before continuing the
                rebase).
 
         • When a commit is prefixed with ‘goal’, a _yellow_ ‘same,’ or
           ‘work’, then that indicates that rebase applied that commit
           but that you then reset ‘HEAD’ to an earlier commit (likely to
           split it up into multiple commits), and that there are some
           uncommitted changes remaining which likely (but not
           necessarily) originate from that commit.
 
              • When a commit is prefixed with ‘goal’, then that
                indicates that it is still possible to create a new
                commit with the exact same tree (the "goal") without
                manually editing any files, by committing the index, or
                by staging all changes and then committing that.  This is
                the case when the original tree still exists in the index
                or worktree in untainted form.
 
              • When a commit is prefixed with a yellow ‘same’, then that
                indicates that it is no longer possible to create a
                commit with the exact same tree, but that it is still
                possible to create a commit with the same patch-id.  This
                would be the case if you created a new commit with other
                changes, but the changes from the original commit still
                exist in the index or working tree in untainted form.
 
              • When a commit is prefixed with ‘work’, then that
                indicates that you reset ‘HEAD’ to an earlier commit, and
                that there are some staged and/or unstaged changes
                (likely, but not necessarily) originating from that
                commit.  However it is no longer possible to create a new
                commit with the same tree or at least the same patch-id
                because you have already made other changes.
 
         • When a commit is prefixed with ‘poof’ or ‘gone’, then that
           indicates that rebase applied that commit but that you then
           reset ‘HEAD’ to an earlier commit (likely to split it up into
           multiple commits), and that there are no uncommitted changes.
 
              • When a commit is prefixed with ‘poof’, then that
                indicates that it is no longer reachable from ‘HEAD’, but
                that it has been replaced with one or more commits, which
                together have the exact same effect.
 
              • When a commit is prefixed with ‘gone’, then that
                indicates that it is no longer reachable from ‘HEAD’ and
                that we also cannot determine whether its changes are
                still in effect in one or more new commits.  They might
                be, but if so, then there must also be other changes
                which makes it impossible to know for sure.
 
    Do not worry if you do not fully understand the above.  That’s okay,
 you will acquire a good enough understanding through practice.
 
    For other sequence operations such as cherry-picking, a similar
 section is displayed, but they lack some of the features described
 above, due to limitations in the git commands used to implement them.
 Most importantly these sequences only support "picking" a commit but not
 other actions such as "rewording", and they do not keep track of the
 commits which have already been applied.
 
    ---------- Footnotes ----------
 
    (1) The patch-id is a hash of the _changes_ introduced by a commit.
 It differs from the hash of the commit itself, which is a hash of the
 result of applying that change (i.e., the resulting trees and blobs) as
 well as author and committer information, the commit message, and the
 hashes of the parents of the commit.  The patch-id hash on the other
 hand is created only from the added and removed lines, even line numbers
 and whitespace changes are ignored when calculating this hash.  The
 patch-ids of two commits can be used to answer the question "Do these
 commits make the same change?".
 
 
 File: magit.info,  Node: Cherry Picking,  Next: Resetting,  Prev: Rebasing,  Up: Manipulating
 
 6.10 Cherry Picking
 ===================
 
 Also see *note (gitman)git-cherry-pick::.
 
 ‘A’ (‘magit-cherry-pick’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
    When no cherry-pick or revert is in progress, then the transient
 features the following suffix commands.
 
 ‘A A’ (‘magit-cherry-copy’)
      This command copies COMMITS from another branch onto the current
      branch.  If the region selects multiple commits, then those are
      copied, without prompting.  Otherwise the user is prompted for a
      commit or range, defaulting to the commit at point.
 
 ‘A a’ (‘magit-cherry-apply’)
      This command applies the changes in COMMITS from another branch
      onto the current branch.  If the region selects multiple commits,
      then those are used, without prompting.  Otherwise the user is
      prompted for a commit or range, defaulting to the commit at point.
 
      This command also has a top-level binding, which can be invoked
      without using the transient by typing ‘a’ at the top-level.
 
    The following commands not only apply some commits to some branch,
 but also remove them from some other branch.  The removal is performed
 using either ‘git-update-ref’ or if necessary ‘git-rebase’.  Both
 applying commits as well as removing them using ‘git-rebase’ can lead to
 conflicts.  If that happens, then these commands abort and you not only
 have to resolve the conflicts but also finish the process the same way
 you would have to if these commands didn’t exist at all.
 
 ‘A h’ (‘magit-cherry-harvest’)
      This command moves the selected COMMITS that must be located on
      another BRANCH onto the current branch instead, removing them from
      the former.  When this command succeeds, then the same branch is
      current as before.
 
      Applying the commits on the current branch or removing them from
      the other branch can lead to conflicts.  When that happens, then
      this command stops and you have to resolve the conflicts and then
      finish the process manually.
 
 ‘A d’ (‘magit-cherry-donate’)
      This command moves the selected COMMITS from the current branch
      onto another existing BRANCH, removing them from the former.  When
      this command succeeds, then the same branch is current as before.
      ‘HEAD’ is allowed to be detached initially.
 
      Applying the commits on the other branch or removing them from the
      current branch can lead to conflicts.  When that happens, then this
      command stops and you have to resolve the conflicts and then finish
      the process manually.
 
 ‘A n’ (‘magit-cherry-spinout’)
      This command moves the selected COMMITS from the current branch
      onto a new branch BRANCH, removing them from the former.  When this
      command succeeds, then the same branch is current as before.
 
      Applying the commits on the other branch or removing them from the
      current branch can lead to conflicts.  When that happens, then this
      command stops and you have to resolve the conflicts and then finish
      the process manually.
 
 ‘A s’ (‘magit-cherry-spinoff’)
      This command moves the selected COMMITS from the current branch
      onto a new branch BRANCH, removing them from the former.  When this
      command succeeds, then the new branch is checked out.
 
      Applying the commits on the other branch or removing them from the
      current branch can lead to conflicts.  When that happens, then this
      command stops and you have to resolve the conflicts and then finish
      the process manually.
 
    When a cherry-pick or revert is in progress, then the transient
 instead features the following suffix commands.
 
 ‘A A’ (‘magit-sequence-continue’)
      Resume the current cherry-pick or revert sequence.
 
 ‘A s’ (‘magit-sequence-skip’)
      Skip the stopped at commit during a cherry-pick or revert sequence.
 
 ‘A a’ (‘magit-sequence-abort’)
      Abort the current cherry-pick or revert sequence.  This discards
      all changes made since the sequence started.
 
 * Menu:
 
 * Reverting::
 
 
 File: magit.info,  Node: Reverting,  Up: Cherry Picking
 
 6.10.1 Reverting
 ----------------
 
 ‘V’ (‘magit-revert’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
    When no cherry-pick or revert is in progress, then the transient
 features the following suffix commands.
 
 ‘V V’ (‘magit-revert-and-commit’)
      Revert a commit by creating a new commit.  Prompt for a commit,
      defaulting to the commit at point.  If the region selects multiple
      commits, then revert all of them, without prompting.
 
 ‘V v’ (‘magit-revert-no-commit’)
      Revert a commit by applying it in reverse to the working tree.
      Prompt for a commit, defaulting to the commit at point.  If the
      region selects multiple commits, then revert all of them, without
      prompting.
 
    When a cherry-pick or revert is in progress, then the transient
 instead features the following suffix commands.
 
 ‘V V’ (‘magit-sequence-continue’)
      Resume the current cherry-pick or revert sequence.
 
 ‘V s’ (‘magit-sequence-skip’)
      Skip the stopped at commit during a cherry-pick or revert sequence.
 
 ‘V a’ (‘magit-sequence-abort’)
      Abort the current cherry-pick or revert sequence.  This discards
      all changes made since the sequence started.
 
 
 File: magit.info,  Node: Resetting,  Next: Stashing,  Prev: Cherry Picking,  Up: Manipulating
 
 6.11 Resetting
 ==============
 
 Also see *note (gitman)git-reset::.
 
 ‘x’ (‘magit-reset-quickly’)
      Reset the ‘HEAD’ and index to some commit read from the user and
      defaulting to the commit at point, and possibly also reset the
      working tree.  With a prefix argument reset the working tree
      otherwise don’t.
 
 ‘X m’ (‘magit-reset-mixed’)
      Reset the ‘HEAD’ and index to some commit read from the user and
      defaulting to the commit at point.  The working tree is kept as-is.
 
 ‘X s’ (‘magit-reset-soft’)
      Reset the ‘HEAD’ to some commit read from the user and defaulting
      to the commit at point.  The index and the working tree are kept
      as-is.
 
 ‘X h’ (‘magit-reset-hard’)
      Reset the ‘HEAD’, index, and working tree to some commit read from
      the user and defaulting to the commit at point.
 
 ‘X k’ (‘magit-reset-keep’)
      Reset the ‘HEAD’, index, and working tree to some commit read from
      the user and defaulting to the commit at point.  Uncommitted
      changes are kept as-is.
 
 ‘X i’ (‘magit-reset-index’)
      Reset the index to some commit read from the user and defaulting to
      the commit at point.  Keep the ‘HEAD’ and working tree as-is, so if
      the commit refers to the ‘HEAD’, then this effectively unstages all
      changes.
 
 ‘X w’ (‘magit-reset-worktree’)
      Reset the working tree to some commit read from the user and
      defaulting to the commit at point.  Keep the ‘HEAD’ and index
      as-is.
 
 ‘X f’ (‘magit-file-checkout’)
      Update file in the working tree and index to the contents from a
      revision.  Both the revision and file are read from the user.
 
 
 File: magit.info,  Node: Stashing,  Prev: Resetting,  Up: Manipulating
 
 6.12 Stashing
 =============
 
 Also see *note (gitman)git-stash::.
 
 ‘z’ (‘magit-stash’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
 ‘z z’ (‘magit-stash-both’)
      Create a stash of the index and working tree.  Untracked files are
      included according to infix arguments.  One prefix argument is
      equivalent to ‘--include-untracked’ while two prefix arguments are
      equivalent to ‘--all’.
 
 ‘z i’ (‘magit-stash-index’)
      Create a stash of the index only.  Unstaged and untracked changes
      are not stashed.
 
 ‘z w’ (‘magit-stash-worktree’)
      Create a stash of unstaged changes in the working tree.  Untracked
      files are included according to infix arguments.  One prefix
      argument is equivalent to ‘--include-untracked’ while two prefix
      arguments are equivalent to ‘--all’.
 
 ‘z x’ (‘magit-stash-keep-index’)
      Create a stash of the index and working tree, keeping index intact.
      Untracked files are included according to infix arguments.  One
      prefix argument is equivalent to ‘--include-untracked’ while two
      prefix arguments are equivalent to ‘--all’.
 
 ‘z Z’ (‘magit-snapshot-both’)
      Create a snapshot of the index and working tree.  Untracked files
      are included according to infix arguments.  One prefix argument is
      equivalent to ‘--include-untracked’ while two prefix arguments are
      equivalent to ‘--all’.
 
 ‘z I’ (‘magit-snapshot-index’)
      Create a snapshot of the index only.  Unstaged and untracked
      changes are not stashed.
 
 ‘z W’ (‘magit-snapshot-worktree’)
      Create a snapshot of unstaged changes in the working tree.
      Untracked files are included according to infix arguments.  One
      prefix argument is equivalent to ‘--include-untracked’ while two
      prefix arguments are equivalent to ‘--all’-.
 
 ‘z a’ (‘magit-stash-apply’)
      Apply a stash to the working tree.
 
      First try ‘git stash apply --index’, which tries to preserve the
      index stored in the stash, if any.  This may fail because applying
      the stash could result in conflicts and those have to be stored in
      the index, making it impossible to also store the stash’s index
      there as well.
 
      If the above failed, then try ‘git stash apply’.  This fails (with
      or without ‘--index’) if there are any uncommitted changes to files
      that are also modified in the stash.
 
      If both of the above failed, then apply using ‘git apply’.  If
      there are no conflicting files, use ‘--3way’.  If there are
      conflicting files, then using ‘--3way’ requires that those files
      are staged first, which may be undesirable, so prompt the user
      whether to use ‘--3way’ or ‘--reject’.
 
      Customize ‘magit-no-confirm’ if you want to always use ‘--3way’,
      without being prompted.
 
 ‘z p’ (‘magit-stash-pop’)
      Apply a stash to the working tree.  On complete success (if the
      stash can be applied without any conflicts, and while preserving
      the stash’s index) then remove the stash from stash list.
 
      First try ‘git stash pop --index’, which tries to preserve the
      index stored in the stash, if any.  This may fail because applying
      the stash could result in conflicts and those have to be stored in
      the index, making it impossible to also store the stash’s index
      there as well.
 
      If the above failed, then try ‘git stash apply’.  This fails (with
      or without ‘--index’) if there are any uncommitted changes to files
      that are also modified in the stash.
 
      If both of the above failed, then apply using ‘git apply’.  If
      there are no conflicting files, use ‘--3way’.  If there are
      conflicting files, then using ‘--3way’ requires that those files
      are staged first, which may be undesirable, so prompt the user
      whether to use ‘--3way’ or ‘--reject’.
 
      Customize ‘magit-no-confirm’ if you want to always use ‘--3way’,
      without being prompted.
 
 ‘z k’ (‘magit-stash-drop’)
      Remove a stash from the stash list.  When the region is active,
      offer to drop all contained stashes.
 
 ‘z v’ (‘magit-stash-show’)
      Show all diffs of a stash in a buffer.
 
 ‘z b’ (‘magit-stash-branch’)
      Create and checkout a new branch from an existing stash.  The new
      branch starts at the commit that was current when the stash was
      created.
 
 ‘z B’ (‘magit-stash-branch-here’)
      Create and checkout a new branch from an existing stash.  Use the
      current branch or ‘HEAD’ as the starting-point of the new branch.
      Then apply the stash, dropping it if it applies cleanly.
 
 ‘z f’ (‘magit-stash-format-patch’)
      Create a patch from STASH.
 
 ‘k’ (‘magit-stash-clear’)
      Remove all stashes saved in REF’s reflog by deleting REF.
 
 ‘z l’ (‘magit-stash-list’)
      List all stashes in a buffer.
 
  -- User Option: magit-stashes-margin
      This option specifies whether the margin is initially shown in
      stashes buffers and how it is formatted.
 
      The value has the form ‘(INIT STYLE WIDTH AUTHOR AUTHOR-WIDTH)’.
 
         • If INIT is non-nil, then the margin is shown initially.
         • STYLE controls how to format the author or committer date.  It
           can be one of ‘age’ (to show the age of the commit),
           ‘age-abbreviated’ (to abbreviate the time unit to a
           character), or a string (suitable for ‘format-time-string’) to
           show the actual date.  Option
           ‘magit-log-margin-show-committer-date’ controls which date is
           being displayed.
         • WIDTH controls the width of the margin.  This exists for
           forward compatibility and currently the value should not be
           changed.
         • AUTHOR controls whether the name of the author is also shown
           by default.
         • AUTHOR-WIDTH has to be an integer.  When the name of the
           author is shown, then this specifies how much space is used to
           do so.
 
 
 File: magit.info,  Node: Transferring,  Next: Miscellaneous,  Prev: Manipulating,  Up: Top
 
 7 Transferring
 **************
 
 * Menu:
 
 * Remotes::
 * Fetching::
 * Pulling::
 * Pushing::
 * Plain Patches::
 * Maildir Patches::
 
 
 File: magit.info,  Node: Remotes,  Next: Fetching,  Up: Transferring
 
 7.1 Remotes
 ===========
 
 * Menu:
 
 * Remote Commands::
 * Remote Git Variables::
 
 
 File: magit.info,  Node: Remote Commands,  Next: Remote Git Variables,  Up: Remotes
 
 7.1.1 Remote Commands
 ---------------------
 
 The transient prefix command ‘magit-remote’ is used to add remotes and
 to make changes to existing remotes.  This command only deals with
 remotes themselves, not with branches or the transfer of commits.  Those
 features are available from separate transient commands.
 
    Also see *note (gitman)git-remote::.
 
 ‘M’ (‘magit-remote’)
      This transient prefix command binds the following suffix commands
      and displays them in a temporary buffer until a suffix is invoked.
 
      By default it also binds and displays the values of some
      remote-related Git variables and allows changing their values.
 
  -- User Option: magit-remote-direct-configure
      This option controls whether remote-related Git variables are
      accessible directly from the transient ‘magit-remote’.
 
      If ‘t’ (the default) and a local branch is checked out, then
      ‘magit-remote’ features the variables for the upstream remote of
      that branch, or if ‘HEAD’ is detached, for ‘origin’, provided that
      exists.
 
      If ‘nil’, then ‘magit-remote-configure’ has to be used to do so.
 
 ‘M C’ (‘magit-remote-configure’)
      This transient prefix command binds commands that set the value of
      remote-related variables and displays them in a temporary buffer
      until the transient is exited.
 
      With a prefix argument, this command always prompts for a remote.
 
      Without a prefix argument this depends on whether it was invoked as
      a suffix of ‘magit-remote’ and on the
      ‘magit-remote-direct-configure’ option.  If ‘magit-remote’ already
      displays the variables for the upstream, then it does not make
      sense to invoke another transient that displays them for the same
      remote.  In that case this command prompts for a remote.
 
    The variables are described in *note Remote Git Variables::.
 
 ‘M a’ (‘magit-remote-add’)
      This command add a remote and fetches it.  The remote name and url
      are read in the minibuffer.
 
 ‘M r’ (‘magit-remote-rename’)
      This command renames a remote.  Both the old and the new names are
      read in the minibuffer.
 
 ‘M u’ (‘magit-remote-set-url’)
      This command changes the url of a remote.  Both the remote and the
      new url are read in the minibuffer.
 
 ‘M k’ (‘magit-remote-remove’)
      This command deletes a remote, read in the minibuffer.
 
 ‘M p’ (‘magit-remote-prune’)
      This command removes stale remote-tracking branches for a remote
      read in the minibuffer.
 
 ‘M P’ (‘magit-remote-prune-refspecs’)
      This command removes stale refspecs for a remote read in the
      minibuffer.
 
      A refspec is stale if there no longer exists at least one branch on
      the remote that would be fetched due to that refspec.  A stale
      refspec is problematic because its existence causes Git to refuse
      to fetch according to the remaining non-stale refspecs.
 
      If only stale refspecs remain, then this command offers to either
      delete the remote or to replace the stale refspecs with the default
      refspec ("+refs/heads/*:refs/remotes/REMOTE/*").
 
      This command also removes the remote-tracking branches that were
      created due to the now stale refspecs.  Other stale branches are
      not removed.
 
  -- User Option: magit-remote-add-set-remote.pushDefault
      This option controls whether the user is asked whether they want to
      set ‘remote.pushDefault’ after adding a remote.
 
      If ‘ask’, then users is always ask.  If ‘ask-if-unset’, then the
      user is only if the variable isn’t set already.  If ‘nil’, then the
      user isn’t asked and the variable isn’t set.  If the value is a
      string, then the variable is set without the user being asked,
      provided that the name of the added remote is equal to that string
      and the variable isn’t already set.
 
 
 File: magit.info,  Node: Remote Git Variables,  Prev: Remote Commands,  Up: Remotes
 
 7.1.2 Remote Git Variables
 --------------------------
 
 These variables can be set from the transient prefix command
 ‘magit-remote-configure’.  By default they can also be set from
 ‘magit-remote’.  See *note Remote Commands::.
 
  -- Variable: remote.NAME.url
      This variable specifies the url of the remote named NAME.  It can
      have multiple values.
 
  -- Variable: remote.NAME.fetch
      The refspec used when fetching from the remote named NAME.  It can
      have multiple values.
 
  -- Variable: remote.NAME.pushurl
      This variable specifies the url used for pushing to the remote
      named NAME.  If it is not specified, then ‘remote.NAME.url’ is used
      instead.  It can have multiple values.
 
  -- Variable: remote.NAME.push
      The refspec used when pushing to the remote named NAME.  It can
      have multiple values.
 
  -- Variable: remote.NAME.tagOpts
      This variable specifies what tags are fetched by default.  If the
      value is ‘--no-tags’ then no tags are fetched.  If the value is
      ‘--tags’, then all tags are fetched.  If this variable has no
      value, then only tags are fetched that are reachable from fetched
      branches.
 
 
 File: magit.info,  Node: Fetching,  Next: Pulling,  Prev: Remotes,  Up: Transferring
 
 7.2 Fetching
 ============
 
 Also see *note (gitman)git-fetch::.  For information about the upstream
 and the push-remote, see *note The Two Remotes::.
 
 ‘f’ (‘magit-fetch’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
 ‘f p’ (‘magit-fetch-from-pushremote’)
      This command fetches from the current push-remote.
 
      With a prefix argument or when the push-remote is either not
      configured or unusable, then let the user first configure the
      push-remote.
 
 ‘f u’ (‘magit-fetch-from-upstream’)
      This command fetch from the upstream of the current branch.
 
      If the upstream is configured for the current branch and names an
      existing remote, then use that.  Otherwise try to use another
      remote: If only a single remote is configured, then use that.
      Otherwise if a remote named "origin" exists, then use that.
 
      If no remote can be determined, then this command is not available
      from the ‘magit-fetch’ transient prefix and invoking it directly
      results in an error.
 
 ‘f e’ (‘magit-fetch-other’)
      This command fetch from a repository read from the minibuffer.
 
 ‘f o’ (‘magit-fetch-branch’)
      This command fetches a branch from a remote, both of which are read
      from the minibuffer.
 
 ‘f r’ (‘magit-fetch-refspec’)
      This command fetches from a remote using an explicit refspec, both
      of which are read from the minibuffer.
 
 ‘f a’ (‘magit-fetch-all’)
      This command fetches from all remotes.
 
 ‘f m’ (‘magit-submodule-fetch’)
      This command fetches all submodules.  With a prefix argument it
      fetches all remotes of all submodules.
 
  -- User Option: magit-pull-or-fetch
      By default fetch and pull commands are available from separate
      transient prefix command.  Setting this to ‘t’ adds some (but not
      all) of the above suffix commands to the ‘magit-pull’ transient.
 
      If you do that, then you might also want to change the key binding
      for these prefix commands, e.g.:
 
           (setq magit-pull-or-fetch t)
           (define-key magit-mode-map "f" 'magit-pull) ; was magit-fetch
           (define-key magit-mode-map "F" nil)         ; was magit-pull
 
 
 File: magit.info,  Node: Pulling,  Next: Pushing,  Prev: Fetching,  Up: Transferring
 
 7.3 Pulling
 ===========
 
 Also see *note (gitman)git-pull::.  For information about the upstream
 and the push-remote, see *note The Two Remotes::.
 
 ‘F’ (‘magit-pull’)
      This transient prefix command binds the following suffix commands
      and displays them in a temporary buffer until a suffix is invoked.
 
 ‘F p’ (‘magit-pull-from-pushremote’)
      This command pulls from the push-remote of the current branch.
 
      With a prefix argument or when the push-remote is either not
      configured or unusable, then let the user first configure the
      push-remote.
 
 ‘F u’ (‘magit-pull-from-upstream’)
      This command pulls from the upstream of the current branch.
 
      With a prefix argument or when the upstream is either not
      configured or unusable, then let the user first configure the
      upstream.
 
 ‘F e’ (‘magit-pull-branch’)
      This command pulls from a branch read in the minibuffer.
 
 
 File: magit.info,  Node: Pushing,  Next: Plain Patches,  Prev: Pulling,  Up: Transferring
 
 7.4 Pushing
 ===========
 
 Also see *note (gitman)git-push::.  For information about the upstream
 and the push-remote, see *note The Two Remotes::.
 
 ‘P’ (‘magit-push’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
 ‘P p’ (‘magit-push-current-to-pushremote’)
      This command pushes the current branch to its push-remote.
 
      With a prefix argument or when the push-remote is either not
      configured or unusable, then let the user first configure the
      push-remote.
 
 ‘P u’ (‘magit-push-current-to-upstream’)
      This command pushes the current branch to its upstream branch.
 
      With a prefix argument or when the upstream is either not
      configured or unusable, then let the user first configure the
      upstream.
 
 ‘P e’ (‘magit-push-current’)
      This command pushes the current branch to a branch read in the
      minibuffer.
 
 ‘P o’ (‘magit-push-other’)
      This command pushes an arbitrary branch or commit somewhere.  Both
      the source and the target are read in the minibuffer.
 
 ‘P r’ (‘magit-push-refspecs’)
      This command pushes one or multiple refspecs to a remote, both of
      which are read in the minibuffer.
 
      To use multiple refspecs, separate them with commas.  Completion is
      only available for the part before the colon, or when no colon is
      used.
 
 ‘P m’ (‘magit-push-matching’)
      This command pushes all matching branches to another repository.
 
      If only one remote exists, then push to that.  Otherwise prompt for
      a remote, offering the remote configured for the current branch as
      default.
 
 ‘P t’ (‘magit-push-tags’)
      This command pushes all tags to another repository.
 
      If only one remote exists, then push to that.  Otherwise prompt for
      a remote, offering the remote configured for the current branch as
      default.
 
 ‘P T’ (‘magit-push-tag’)
      This command pushes a tag to another repository.
 
    One of the infix arguments, ‘--force-with-lease’, deserves a word of
 caution.  It is passed without a value, which means "permit a force push
 as long as the remote-tracking branches match their counterparts on the
 remote end".  If you’ve set up a tool to do automatic fetches (Magit
 itself does not provide such functionality), using ‘--force-with-lease’
 can be dangerous because you don’t actually control or know the state of
 the remote-tracking refs.  In that case, you should consider setting
 ‘push.useForceIfIncludes’ to ‘true’ (available since Git 2.30).
 
    Two more push commands exist, which by default are not available from
 the push transient.  See their doc-strings for instructions on how to
 add them to the transient.
 
  -- Command: magit-push-implicitly args
      This command pushes somewhere without using an explicit refspec.
 
      This command simply runs ‘git push -v [ARGS]’.  ARGS are the infix
      arguments.  No explicit refspec arguments are used.  Instead the
      behavior depends on at least these Git variables: ‘push.default’,
      ‘remote.pushDefault’, ‘branch.<branch>.pushRemote’,
      ‘branch.<branch>.remote’, ‘branch.<branch>.merge’, and
      ‘remote.<remote>.push’.
 
      If you add this suffix to a transient prefix without explicitly
      specifying the description, then an attempt is made to predict what
      this command will do.  For example:
 
           (transient-insert-suffix 'magit-push \"p\"
             '(\"i\" magit-push-implicitly))"
 
  -- Command: magit-push-to-remote remote args
      This command pushes to the remote REMOTE without using an explicit
      refspec.  The remote is read in the minibuffer.
 
      This command simply runs ‘git push -v [ARGS] REMOTE’.  ARGS are the
      infix arguments.  No refspec arguments are used.  Instead the
      behavior depends on at least these Git variables: ‘push.default’,
      ‘remote.pushDefault’, ‘branch.<branch>.pushRemote’,
      ‘branch.<branch>.remote’, ‘branch.<branch>.merge’, and
      ‘remote.<remote>.push’.
 
 
 File: magit.info,  Node: Plain Patches,  Next: Maildir Patches,  Prev: Pushing,  Up: Transferring
 
 7.5 Plain Patches
 =================
 
 ‘W’ (‘magit-patch’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
 ‘W c’ (‘magit-patch-create’)
      This command creates patches for a set commits.  If the region
      marks several commits, then it creates patches for all of them.
      Otherwise it functions as a transient prefix command, which
      features several infix arguments and binds itself as a suffix
      command.  When this command is invoked as a suffix of itself, then
      it creates a patch using the specified infix arguments.
 
 ‘w a’ (‘magit-patch-apply’)
      This command applies a patch.  This is a transient prefix command,
      which features several infix arguments and binds itself as a suffix
      command.  When this command is invoked as a suffix of itself, then
      it applies a patch using the specified infix arguments.
 
 ‘W s’ (‘magit-patch-save’)
      This command creates a patch from the current diff.
 
      Inside ‘magit-diff-mode’ or ‘magit-revision-mode’ buffers, ‘C-x
      C-w’ is also bound to this command.
 
    It is also possible to save a plain patch file by using ‘C-x C-w’
 inside a ‘magit-diff-mode’ or ‘magit-revision-mode’ buffer.
 
 
 File: magit.info,  Node: Maildir Patches,  Prev: Plain Patches,  Up: Transferring
 
 7.6 Maildir Patches
 ===================
 
 Also see *note (gitman)git-am::.  and *note (gitman)git-apply::.
 
 ‘w’ (‘magit-am’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
 ‘w w’ (‘magit-am-apply-patches’)
      This command applies one or more patches.  If the region marks
      files, then those are applied as patches.  Otherwise this command
      reads a file-name in the minibuffer, defaulting to the file at
      point.
 
 ‘w m’ (‘magit-am-apply-maildir’)
      This command applies patches from a maildir.
 
 ‘w a’ (‘magit-patch-apply’)
      This command applies a plain patch.  For a longer description see
      *note Plain Patches::.  This command is only available from the
      ‘magit-am’ transient for historic reasons.
 
    When an "am" operation is in progress, then the transient instead
 features the following suffix commands.
 
 ‘w w’ (‘magit-am-continue’)
      This command resumes the current patch applying sequence.
 
 ‘w s’ (‘magit-am-skip’)
      This command skips the stopped at patch during a patch applying
      sequence.
 
 ‘w a’ (‘magit-am-abort’)
      This command aborts the current patch applying sequence.  This
      discards all changes made since the sequence started.
 
 
 File: magit.info,  Node: Miscellaneous,  Next: Customizing,  Prev: Transferring,  Up: Top
 
 8 Miscellaneous
 ***************
 
 * Menu:
 
 * Tagging::
 * Notes::
 * Submodules::
 * Subtree::
 * Worktree::
 * Sparse checkouts::
 * Bundle::
 * Common Commands::
 * Wip Modes::
 * Commands for Buffers Visiting Files::
 * Minor Mode for Buffers Visiting Blobs::
 
 
 File: magit.info,  Node: Tagging,  Next: Notes,  Up: Miscellaneous
 
 8.1 Tagging
 ===========
 
 Also see *note (gitman)git-tag::.
 
 ‘t’ (‘magit-tag’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
 ‘t t’ (‘magit-tag-create’)
      This command creates a new tag with the given NAME at REV.  With a
      prefix argument it creates an annotated tag.
 
 ‘t r’ (‘magit-tag-release’)
      This commands creates a release tag.  It assumes that release tags
      match ‘magit-release-tag-regexp’.
 
      First it prompts for the name of the new tag using the highest
      existing tag as initial input and leaving it to the user to
      increment the desired part of the version string.  If you use
      unconventional release tags or version numbers (e.g.,
      ‘v1.2.3-custom.1’), you can set the ‘magit-release-tag-regexp’ and
      ‘magit-tag-version-regexp-alist’ variables.
 
      If ‘--annotate’ is enabled then it prompts for the message of the
      new tag.  The proposed tag message is based on the message of the
      highest tag, provided that that contains the corresponding version
      string and substituting the new version string for that.  Otherwise
      it proposes something like "Foo-Bar 1.2.3", given, for example, a
      TAG "v1.2.3" and a repository located at something like
      "/path/to/foo-bar".
 
 ‘t k’ (‘magit-tag-delete’)
      This command deletes one or more tags.  If the region marks
      multiple tags (and nothing else), then it offers to delete those.
      Otherwise, it prompts for a single tag to be deleted, defaulting to
      the tag at point.
 
 ‘t p’ (‘magit-tag-prune’)
      This command offers to delete tags missing locally from REMOTE, and
      vice versa.
 
 
 File: magit.info,  Node: Notes,  Next: Submodules,  Prev: Tagging,  Up: Miscellaneous
 
 8.2 Notes
 =========
 
 Also see *note (gitman)git-notes::.
 
 ‘T’ (‘magit-notes’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
 ‘T T’ (‘magit-notes-edit’)
      Edit the note attached to a commit, defaulting to the commit at
      point.
 
      By default use the value of Git variable ‘core.notesRef’ or
      "refs/notes/commits" if that is undefined.
 
 ‘T r’ (‘magit-notes-remove’)
      Remove the note attached to a commit, defaulting to the commit at
      point.
 
      By default use the value of Git variable ‘core.notesRef’ or
      "refs/notes/commits" if that is undefined.
 
 ‘T p’ (‘magit-notes-prune’)
      Remove notes about unreachable commits.
 
    It is possible to merge one note ref into another.  That may result
 in conflicts which have to resolved in the temporary worktree
 ".git/NOTES_MERGE_WORKTREE".
 
 ‘T m’ (‘magit-notes-merge’)
      Merge the notes of a ref read from the user into the current notes
      ref.  The current notes ref is the value of Git variable
      ‘core.notesRef’ or "refs/notes/commits" if that is undefined.
 
    When a notes merge is in progress then the transient features the
 following suffix commands, instead of those listed above.
 
 ‘T c’ (‘magit-notes-merge-commit’)
      Commit the current notes ref merge, after manually resolving
      conflicts.
 
 ‘T a’ (‘magit-notes-merge-abort’)
      Abort the current notes ref merge.
 
    The following variables control what notes reference ‘magit-notes-*’,
 ‘git notes’ and ‘git show’ act on and display.  Both the local and
 global values are displayed and can be modified.
 
  -- Variable: core.notesRef
      This variable specifies the notes ref that is displayed by default
      and which commands act on by default.
 
  -- Variable: notes.displayRef
      This variable specifies additional notes ref to be displayed in
      addition to the ref specified by ‘core.notesRef’.  It can have
      multiple values and may end with ‘*’ to display all refs in the
      ‘refs/notes/’ namespace (or ‘**’ if some names contain slashes).
 
 
 File: magit.info,  Node: Submodules,  Next: Subtree,  Prev: Notes,  Up: Miscellaneous
 
 8.3 Submodules
 ==============
 
 Also see *note (gitman)git-submodule::.
 
 * Menu:
 
 * Listing Submodules::
 * Submodule Transient::
 
 
 File: magit.info,  Node: Listing Submodules,  Next: Submodule Transient,  Up: Submodules
 
 8.3.1 Listing Submodules
 ------------------------
 
 The command ‘magit-list-submodules’ displays a list of the current
 repository’s submodules in a separate buffer.  It’s also possible to
 display information about submodules directly in the status buffer of
 the super-repository by adding ‘magit-insert-modules’ to the hook
 ‘magit-status-sections-hook’ as described in *note Status Module
 Sections::.
 
  -- Command: magit-list-submodules
      This command displays a list of the current repository’s populated
      submodules in a separate buffer.
 
      It can be invoked by pressing ‘RET’ on the section titled
      "Modules".
 
  -- User Option: magit-submodule-list-columns
      This option controls what columns are displayed by the command
      ‘magit-list-submodules’ and how they are displayed.
 
      Each element has the form ‘(HEADER WIDTH FORMAT PROPS)’.
 
      HEADER is the string displayed in the header.  WIDTH is the width
      of the column.  FORMAT is a function that is called with one
      argument, the repository identification (usually its basename), and
      with ‘default-directory’ bound to the toplevel of its working tree.
      It has to return a string to be inserted or nil.  PROPS is an alist
      that supports the keys ‘:right-align’, ‘:pad-right’ and ‘:sort’.
 
      The ‘:sort’ function has a weird interface described in the
      docstring of ‘tabulated-list--get-sort’.  Alternatively ‘<’ and
      ‘magit-repolist-version<’ can be used as those functions are
      automatically replaced with functions that satisfy the interface.
      Set ‘:sort’ to ‘nil’ to inhibit sorting; if unspecified, then the
      column is sortable using the default sorter.
 
      You may wish to display a range of numeric columns using just one
      character per column and without any padding between columns, in
      which case you should use an appropriate HEADER, set WIDTH to 1,
      and set ‘:pad-right’ to 9.  ‘+’ is substituted for numbers higher
      than 9.
 
 
 File: magit.info,  Node: Submodule Transient,  Prev: Listing Submodules,  Up: Submodules
 
 8.3.2 Submodule Transient
 -------------------------
 
 ‘o’ (‘magit-submodule’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
    Some of the below commands default to act on the modules that are
 selected using the region.  For brevity their description talk about
 "the selected modules", but if no modules are selected, then they act on
 the current module instead, or if point isn’t on a module, then the read
 a single module to act on.  With a prefix argument these commands ignore
 the selection and the current module and instead act on all suitable
 modules.
 
 ‘o a’ (‘magit-submodule-add’)
      This commands adds the repository at URL as a module.  Optional
      PATH is the path to the module relative to the root of the
      super-project.  If it is nil then the path is determined based on
      URL.
 
 ‘o r’ (‘magit-submodule-register’)
      This command registers the selected modules by copying their urls
      from ".gitmodules" to "$GIT_DIR/config".  These values can then be
      edited before running ‘magit-submodule-populate’.  If you don’t
      need to edit any urls, then use the latter directly.
 
 ‘o p’ (‘magit-submodule-populate’)
      This command creates the working directory or directories of the
      selected modules, checking out the recorded commits.
 
 ‘o u’ (‘magit-submodule-update’)
      This command updates the selected modules checking out the recorded
      commits.
 
 ‘o s’ (‘magit-submodule-synchronize’)
      This command synchronizes the urls of the selected modules, copying
      the values from ".gitmodules" to the ".git/config" of the
      super-project as well those of the modules.
 
 ‘o d’ (‘magit-submodule-unpopulate’)
      This command removes the working directory of the selected modules.
 
 ‘o l’ (‘magit-list-submodules’)
      This command displays a list of the current repository’s modules.
 
 ‘o f’ (‘magit-fetch-modules’)
      This command fetches all populated modules.
 
      Option ‘magit-fetch-modules-jobs’ controls how many submodules are
      being fetched in parallel.  Also fetch the super-repository,
      because ‘git fetch’ does not support not doing that.  With a prefix
      argument fetch all remotes.
 
 
 File: magit.info,  Node: Subtree,  Next: Worktree,  Prev: Submodules,  Up: Miscellaneous
 
 8.4 Subtree
 ===========
 
 Also see *note (gitman)git-subtree::.
 
 ‘O’ (‘magit-subtree’)
      This transient prefix command binds the two sub-transients; one for
      importing a subtree and one for exporting a subtree.
 
 ‘O i’ (‘magit-subtree-import’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
      The suffixes of this command import subtrees.
 
      If the ‘--prefix’ argument is set, then the suffix commands use
      that prefix without prompting the user.  If it is unset, then they
      read the prefix in the minibuffer.
 
 ‘O i a’ (‘magit-subtree-add’)
      This command adds COMMIT from REPOSITORY as a new subtree at
      PREFIX.
 
 ‘O i c’ (‘magit-subtree-add-commit’)
      This command add COMMIT as a new subtree at PREFIX.
 
 ‘O i m’ (‘magit-subtree-merge’)
      This command merges COMMIT into the PREFIX subtree.
 
 ‘O i f’ (‘magit-subtree-pull’)
      This command pulls COMMIT from REPOSITORY into the PREFIX subtree.
 
 ‘O e’ (‘magit-subtree-export’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
      The suffixes of this command export subtrees.
 
      If the ‘--prefix’ argument is set, then the suffix commands use
      that prefix without prompting the user.  If it is unset, then they
      read the prefix in the minibuffer.
 
 ‘O e p’ (‘magit-subtree-push’)
      This command extract the history of the subtree PREFIX and pushes
      it to REF on REPOSITORY.
 
 ‘O e s’ (‘magit-subtree-split’)
      This command extracts the history of the subtree PREFIX.
 
 
 File: magit.info,  Node: Worktree,  Next: Sparse checkouts,  Prev: Subtree,  Up: Miscellaneous
 
 8.5 Worktree
 ============
 
 Also see *note (gitman)git-worktree::.
 
 ‘Z’ (‘magit-worktree’)
      This transient prefix command binds the following suffix commands
      and displays them in a temporary buffer until a suffix is invoked.
 
 ‘Z b’ (‘magit-worktree-checkout’)
      Checkout BRANCH in a new worktree at PATH.
 
 ‘Z c’ (‘magit-worktree-branch’)
      Create a new BRANCH and check it out in a new worktree at PATH.
 
 ‘Z m’ (‘magit-worktree-move’)
      Move an existing worktree to a new PATH.
 
 ‘Z k’ (‘magit-worktree-delete’)
      Delete a worktree, defaulting to the worktree at point.  The
      primary worktree cannot be deleted.
 
 ‘Z g’ (‘magit-worktree-status’)
      Show the status for the worktree at point.
 
      If there is no worktree at point, then read one in the minibuffer.
      If the worktree at point is the one whose status is already being
      displayed in the current buffer, then show it in Dired instead.
 
 
 File: magit.info,  Node: Sparse checkouts,  Next: Bundle,  Prev: Worktree,  Up: Miscellaneous
 
 8.6 Sparse checkouts
 ====================
 
 Sparse checkouts provide a way to restrict the working tree to a subset
 of directories.  See *note (gitman)git-sparse-checkout::.
 
    *Warning*: Git introduced the ‘git sparse-checkout’ command in
 version 2.25 and still advertises it as experimental and subject to
 change.  Magit’s interface should be considered the same.  In
 particular, if Git introduces a backward incompatible change, Magit’s
 sparse checkout functionality may be updated in a way that requires a
 more recent Git version.
 
 ‘>’ (‘magit-sparse-checkout’)
      This transient prefix command binds the following suffix commands
      and displays them in a temporary buffer until a suffix is invoked.
 
 ‘> e’ (‘magit-sparse-checkout-enable’)
      This command initializes a sparse checkout that includes only the
      files in the top-level directory.
 
      Note that ‘magit-sparse-checkout-set’ and
      ‘magit-sparse-checkout-add’ automatically initialize a sparse
      checkout if necessary.  However, you may want to call
      ‘magit-sparse-checkout-enable’ explicitly to re-initialize a sparse
      checkout after calling ‘magit-sparse-checkout-disable’, to pass
      additional arguments to ‘git sparse-checkout init’, or to execute
      the initialization asynchronously.
 
 ‘> s’ (‘magit-sparse-checkout-set’)
      This command takes a list of directories and configures the sparse
      checkout to include only files in those subdirectories.  Any
      previously included directories are excluded unless they are in the
      provided list of directories.
 
 ‘> a’ (‘magit-sparse-checkout-add’)
      This command is like ‘magit-sparse-checkout-set’, but instead adds
      the specified list of directories to the set of directories that is
      already included in the sparse checkout.
 
 ‘> r’ (‘magit-sparse-checkout-reapply’)
      This command applies the currently configured sparse checkout
      patterns to the working tree.  This is useful to call if excluded
      files have been checked out after operations such as merging or
      rebasing.
 
 ‘> d’ (‘magit-sparse-checkout-disable’)
      This command restores the full checkout.  To return to the previous
      sparse checkout, call ‘magit-sparse-checkout-enable’.
 
    A sparse checkout can also be initiated when cloning a repository by
 using the ‘magit-clone-sparse’ command in the ‘magit-clone’ transient
 (see *note Cloning Repository::).
 
    If you want the status buffer to indicate when a sparse checkout is
 enabled, add the function ‘magit-sparse-checkout-insert-header’ to
 ‘magit-status-headers-hook’.
 
 
 File: magit.info,  Node: Bundle,  Next: Common Commands,  Prev: Sparse checkouts,  Up: Miscellaneous
 
 8.7 Bundle
 ==========
 
 Also see *note (gitman)git-bundle::.
 
  -- Command: magit-bundle
      This transient prefix command binds several suffix commands for
      running ‘git bundle’ subcommands and displays them in a temporary
      buffer until a suffix is invoked.
 
 
 File: magit.info,  Node: Common Commands,  Next: Wip Modes,  Prev: Bundle,  Up: Miscellaneous
 
 8.8 Common Commands
 ===================
 
  -- Command: magit-switch-to-repository-buffer
  -- Command: magit-switch-to-repository-buffer-other-window
  -- Command: magit-switch-to-repository-buffer-other-frame
  -- Command: magit-display-repository-buffer
      These commands read any existing Magit buffer that belongs to the
      current repository from the user and then switch to the selected
      buffer (without refreshing it).
 
      The last variant uses ‘magit-display-buffer’ to do so and thus
      respects ‘magit-display-buffer-function’.
 
    These are some of the commands that can be used in all buffers whose
 major-modes derive from ‘magit-mode’.  There are other common commands
 beside the ones below, but these didn’t fit well anywhere else.
 
 ‘C-w’ (‘magit-copy-section-value’)
      This command saves the value of the current section to the
      ‘kill-ring’, and, provided that the current section is a commit,
      branch, or tag section, it also pushes the (referenced) revision to
      the ‘magit-revision-stack’.
 
      When the current section is a branch or a tag, and a prefix
      argument is used, then it saves the revision at its tip to the
      ‘kill-ring’ instead of the reference name.
 
      When the region is active, this command saves that to the
      ‘kill-ring’, like ‘kill-ring-save’ would, instead of behaving as
      described above.  If a prefix argument is used and the region is
      within a hunk, then it strips the diff marker column and keeps only
      either the added or removed lines, depending on the sign of the
      prefix argument.
 
 ‘M-w’ (‘magit-copy-buffer-revision’)
      This command saves the revision being displayed in the current
      buffer to the ‘kill-ring’ and also pushes it to the
      ‘magit-revision-stack’.  It is mainly intended for use in
      ‘magit-revision-mode’ buffers, the only buffers where it is always
      unambiguous exactly which revision should be saved.
 
      Most other Magit buffers usually show more than one revision, in
      some way or another, so this command has to select one of them, and
      that choice might not always be the one you think would have been
      the best pick.
 
    Outside of Magit ‘M-w’ and ‘C-w’ are usually bound to
 ‘kill-ring-save’ and ‘kill-region’, and these commands would also be
 useful in Magit buffers.  Therefore when the region is active, then both
 of these commands behave like ‘kill-ring-save’ instead of as described
 above.
 
 
 File: magit.info,  Node: Wip Modes,  Next: Commands for Buffers Visiting Files,  Prev: Common Commands,  Up: Miscellaneous
 
 8.9 Wip Modes
 =============
 
 Git keeps *committed* changes around long enough for users to recover
 changes they have accidentally deleted.  It does so by not garbage
 collecting any committed but no longer referenced objects for a certain
 period of time, by default 30 days.
 
    But Git does *not* keep track of *uncommitted* changes in the working
 tree and not even the index (the staging area).  Because Magit makes it
 so convenient to modify uncommitted changes, it also makes it easy to
 shoot yourself in the foot in the process.
 
    For that reason Magit provides a global mode that saves *tracked*
 files to work-in-progress references after or before certain actions.
 (At present untracked files are never saved and for technical reasons
 nothing is saved before the first commit has been created).
 
    Two separate work-in-progress references are used to track the state
 of the index and of the working tree: ‘refs/wip/index/<branchref>’ and
 ‘refs/wip/wtree/<branchref>’, where ‘<branchref>’ is the full ref of the
 current branch, e.g., ‘refs/heads/master’.  When the ‘HEAD’ is detached
 then ‘HEAD’ is used in place of ‘<branchref>’.
 
    Checking out another branch (or detaching ‘HEAD’) causes the use of
 different wip refs for subsequent changes.
 
  -- User Option: magit-wip-mode
      When this mode is enabled, then uncommitted changes are committed
      to dedicated work-in-progress refs whenever appropriate (i.e., when
      dataloss would be a possibility otherwise).
 
      Setting this variable directly does not take effect; either use the
      Custom interface to do so or call the respective mode function.
 
      For historic reasons this mode is implemented on top of four other
      ‘magit-wip-*’ modes, which can also be used individually, if you
      want finer control over when the wip refs are updated; but that is
      discouraged.  See *note Legacy Wip Modes::.
 
    To view the log for a branch and its wip refs use the commands
 ‘magit-wip-log’ and ‘magit-wip-log-current’.  You should use ‘--graph’
 when using these commands.
 
  -- Command: magit-wip-log
      This command shows the log for a branch and its wip refs.  With a
      negative prefix argument only the worktree wip ref is shown.
 
      The absolute numeric value of the prefix argument controls how many
      "branches" of each wip ref are shown.  This is only relevant if the
      value of ‘magit-wip-merge-branch’ is ‘nil’.
 
  -- Command: magit-wip-log-current
      This command shows the log for the current branch and its wip refs.
      With a negative prefix argument only the worktree wip ref is shown.
 
      The absolute numeric value of the prefix argument controls how many
      "branches" of each wip ref are shown.  This is only relevant if the
      value of ‘magit-wip-merge-branch’ is ‘nil’.
 
 ‘X w’ (‘magit-reset-worktree’)
      This command resets the working tree to some commit read from the
      user and defaulting to the commit at point, while keeping the
      ‘HEAD’ and index as-is.
 
      This can be used to restore files to the state committed to a wip
      ref.  Note that this will discard any unstaged changes that might
      have existed before invoking this command (but of course only after
      committing that to the working tree wip ref).
 
    Note that even if you enable ‘magit-wip-mode’ this won’t give you
 perfect protection.  The most likely scenario for losing changes despite
 the use of ‘magit-wip-mode’ is making a change outside Emacs and then
 destroying it also outside Emacs.  In some such a scenario, Magit, being
 an Emacs package, didn’t get the opportunity to keep you from shooting
 yourself in the foot.
 
    When you are unsure whether Magit did commit a change to the wip
 refs, then you can explicitly request that all changes to all tracked
 files are being committed.
 
 ‘M-x magit-wip-commit’
      This command commits all changes to all tracked files to the index
      and working tree work-in-progress refs.  Like the modes described
      above, it does not commit untracked files, but it does check all
      tracked files for changes.  Use this command when you suspect that
      the modes might have overlooked a change made outside Emacs/Magit.
 
  -- User Option: magit-wip-namespace
      The namespace used for work-in-progress refs.  It has to end with a
      slash.  The wip refs are named ‘<namespace>index/<branchref>’ and
      ‘<namespace>wtree/<branchref>’.  When snapshots are created while
      the ‘HEAD’ is detached then ‘HEAD’ is used in place of
      ‘<branchref>’.
 
  -- User Option: magit-wip-mode-lighter
      Mode-line lighter for ‘magit-wip--mode’.
 
 * Menu:
 
 * Wip Graph::
 * Legacy Wip Modes::
 
 
 File: magit.info,  Node: Wip Graph,  Next: Legacy Wip Modes,  Up: Wip Modes
 
 8.9.1 Wip Graph
 ---------------
 
  -- User Option: magit-wip-merge-branch
      This option controls whether the current branch is merged into the
      wip refs after a new commit was created on the branch.
 
      If non-nil and the current branch has new commits, then it is
      merged into the wip ref before creating a new wip commit.  This
      makes it easier to inspect wip history and the wip commits are
      never garbage collected.
 
      If nil and the current branch has new commits, then the wip ref is
      reset to the tip of the branch before creating a new wip commit.
      With this setting wip commits are eventually garbage collected.
 
    When ‘magit-wip-merge-branch’ is ‘t’, then the history looks like
 this:
 
        *--*--*--*--*--*       refs/wip/index/refs/heads/master
       /     /     /
      A-----B-----C            refs/heads/master
 
    When ‘magit-wip-merge-branch’ is ‘nil’, then creating a commit on the
 real branch and then making a change causes the wip refs to be recreated
 to fork from the new commit.  But the old commits on the wip refs are
 not lost.  They are still available from the reflog.  To make it easier
 to see when the fork point of a wip ref was changed, an additional
 commit with the message "restart autosaving" is created on it (‘xxO’
 commits below are such boundary commits).
 
    Starting with
 
            BI0---BI1    refs/wip/index/refs/heads/master
           /
      A---B              refs/heads/master
           \
            BW0---BW1    refs/wip/wtree/refs/heads/master
 
    and committing the staged changes and editing and saving a file would
 result in
 
            BI0---BI1        refs/wip/index/refs/heads/master
           /
      A---B---C              refs/heads/master
           \   \
            \   CW0---CW1    refs/wip/wtree/refs/heads/master
             \
              BW0---BW1      refs/wip/wtree/refs/heads/master@{2}
 
    The fork-point of the index wip ref is not changed until some change
 is being staged.  Likewise just checking out a branch or creating a
 commit does not change the fork-point of the working tree wip ref.  The
 fork-points are not adjusted until there actually is a change that
 should be committed to the respective wip ref.
 
 
 File: magit.info,  Node: Legacy Wip Modes,  Prev: Wip Graph,  Up: Wip Modes
 
 8.9.2 Legacy Wip Modes
 ----------------------
 
 It is recommended that you use the mode ‘magit-wip-mode’ (which see) and
 ignore the existence of the following modes, which are preserved for
 historic reasons.
 
    Setting the following variables directly does not take effect; either
 use the Custom interface to do so or call the respective mode functions.
 
  -- User Option: magit-wip-after-save-mode
      When this mode is enabled, then saving a buffer that visits a file
      tracked in a Git repository causes its current state to be
      committed to the working tree wip ref for the current branch.
 
  -- User Option: magit-wip-after-apply-mode
      When this mode is enabled, then applying (i.e., staging, unstaging,
      discarding, reversing, and regularly applying) a change to a file
      tracked in a Git repository causes its current state to be
      committed to the index and/or working tree wip refs for the current
      branch.
 
    If you only ever edit files using Emacs and only ever interact with
 Git using Magit, then the above two modes should be enough to protect
 each and every change from accidental loss.  In practice nobody does
 that.  Two additional modes exists that do commit to the wip refs before
 making changes that could cause the loss of earlier changes.
 
  -- User Option: magit-wip-before-change-mode
      When this mode is enabled, then certain commands commit the
      existing changes to the files they are about to make changes to.
 
  -- User Option: magit-wip-initial-backup-mode
      When this mode is enabled, then the current version of a file is
      committed to the worktree wip ref before the buffer visiting that
      file is saved for the first time since the buffer was created.
 
      This backs up the same version of the file that ‘backup-buffer’
      would save.  While ‘backup-buffer’ uses a backup file, this mode
      uses the same worktree wip ref as used by the other Magit Wip
      modes.  Like ‘backup-buffer’, it only does this once; unless you
      kill the buffer and visit the file again only one backup will be
      created per Emacs session.
 
      This mode ignores the variables that affect ‘backup-buffer’ and can
      be used along-side that function, which is recommended because it
      only backs up files that are tracked in a Git repository.
 
  -- User Option: magit-wip-after-save-local-mode-lighter
      Mode-line lighter for ‘magit-wip-after-save-local-mode’.
 
  -- User Option: magit-wip-after-apply-mode-lighter
      Mode-line lighter for ‘magit-wip-after-apply-mode’.
 
  -- User Option: magit-wip-before-change-mode-lighter
      Mode-line lighter for ‘magit-wip-before-change-mode’.
 
  -- User Option: magit-wip-initial-backup-mode-lighter
      Mode-line lighter for ‘magit-wip-initial-backup-mode’.
 
 
 File: magit.info,  Node: Commands for Buffers Visiting Files,  Next: Minor Mode for Buffers Visiting Blobs,  Prev: Wip Modes,  Up: Miscellaneous
 
 8.10 Commands for Buffers Visiting Files
 ========================================
 
 By default Magit defines a few global key bindings.  These bindings are
 a compromise between providing no bindings at all and providing the
 better bindings I would have liked to use instead.  Magit cannot provide
 the set of recommended bindings by default because those key sequences
 are stricktly reserved for bindings added by the user.  Also see *note
 Global Bindings:: and *note (elisp)Key Binding Conventions::.
 
    To use the recommended bindings, add this to your init file and
 restart Emacs.
 
      (setq magit-define-global-key-bindings 'recommended)
 
    If you don’t want Magit to add any bindings to the global keymap at
 all, add this to your init file and restart Emacs.
 
      (setq magit-define-global-key-bindings nil)
 
 ‘C-c f’ (‘magit-file-dispatch’)
 ‘C-c f s’ (‘magit-stage-file’)
 ‘C-c f s’ (‘magit-stage-buffer-file’)
 ‘C-c f u’ (‘magit-unstage-file’)
 ‘C-c f u’ (‘magit-unstage-buffer-file’)
 ‘C-c f , x’ (‘magit-file-untrack’)
 ‘C-c f , r’ (‘magit-file-rename’)
 ‘C-c f , k’ (‘magit-file-delete’)
 ‘C-c f , c’ (‘magit-file-checkout’)
 ‘C-c f D’ (‘magit-diff’)
 ‘C-c f d’ (‘magit-diff-buffer-file’)
 ‘C-c f L’ (‘magit-log’)
 ‘C-c f l’ (‘magit-log-buffer-file’)
 ‘C-c f t’ (‘magit-log-trace-definition’)
 ‘C-c f M’ (‘magit-log-merged’)
 ‘C-c f B’ (‘magit-blame’)
 ‘C-c f b’ (‘magit-blame-additions’)
 ‘C-c f r’ (‘magit-blame-removal’)
 ‘C-c f f’ (‘magit-blame-reverse’)
 ‘C-c f m’ (‘magit-blame-echo’)
 ‘C-c f q’ (‘magit-blame-quit’)
 ‘C-c f p’ (‘magit-blob-previous’)
 ‘C-c f n’ (‘magit-blob-next’)
 ‘C-c f v’ (‘magit-find-file’)
 ‘C-c f V’ (‘magit-blob-visit-file’)
 ‘C-c f g’ (‘magit-status-here’)
 ‘C-c f G’ (‘magit-display-repository-buffer’)
 ‘C-c f c’ (‘magit-commit’)
 ‘C-c f e’ (‘magit-edit-line-commit’)
      Each of these commands is documented individually right below,
      alongside their default key bindings.  The bindings shown above are
      the recommended bindings, which you can enable by following the
      instructions further up.
 
 ‘C-c M-g’ (‘magit-file-dispatch’)
      This transient prefix command binds the following suffix commands
      and displays them in a temporary buffer until a suffix is invoked.
 
 ‘C-c M-g s’ (‘magit-stage-file’)
 ‘C-c M-g s’ (‘magit-stage-buffer-file’)
      Stage all changes to the file being visited in the current buffer.
      When not visiting a file, then the first command is used, which
      prompts for a file.
 
 ‘C-c M-g u’ (‘magit-unstage-file’)
 ‘C-c M-g u’ (‘magit-unstage-buffer-file’)
      Unstage all changes to the file being visited in the current
      buffer.  When not visiting a file, then the first command is used,
      which prompts for a file.
 
 ‘C-c M-g , x’ (‘magit-file-untrack’)
      This command untracks a file read from the user, defaulting to the
      visited file.
 
 ‘C-c M-g , r’ (‘magit-file-rename’)
      This command renames a file read from the user, defaulting to the
      visited file.
 
 ‘C-c M-g , k’ (‘magit-file-delete’)
      This command deletes a file read from the user, defaulting to the
      visited file.
 
 ‘C-c M-g , c’ (‘magit-file-checkout’)
      This command updates a file in the working tree and index to the
      contents from a revision.  Both the revision and file are read from
      the user.
 
 ‘C-c M-g D’ (‘magit-diff’)
      This transient prefix command binds several diff suffix commands
      and infix arguments and displays them in a temporary buffer until a
      suffix is invoked.  See *note Diffing::.
 
      This is the same command that ‘d’ is bound to in Magit buffers.  If
      this command is invoked from a file-visiting buffer, then the
      initial value of the option (‘--’) that limits the diff to certain
      file(s) is set to the visited file.
 
 ‘C-c M-g d’ (‘magit-diff-buffer-file’)
      This command shows the diff for the file of blob that the current
      buffer visits.
 
  -- User Option: magit-diff-buffer-file-locked
      This option controls whether ‘magit-diff-buffer-file’ uses a
      dedicated buffer.  See *note Modes and Buffers::.
 
 ‘C-c M-g L’ (‘magit-log’)
      This transient prefix command binds several log suffix commands and
      infix arguments and displays them in a temporary buffer until a
      suffix is invoked.  See *note Logging::.
 
      This is the same command that ‘l’ is bound to in Magit buffers.  If
      this command is invoked from a file-visiting buffer, then the
      initial value of the option (‘--’) that limits the log to certain
      file(s) is set to the visited file.
 
 ‘C-c M-g l’ (‘magit-log-buffer-file’)
      This command shows the log for the file of blob that the current
      buffer visits.  Renames are followed when a prefix argument is used
      or when ‘--follow’ is an active log argument.  When the region is
      active, the log is restricted to the selected line range.
 
  -- User Option: magit-log-buffer-file-locked
      This option controls whether ‘magit-log-buffer-file’ uses a
      dedicated buffer.  See *note Modes and Buffers::.
 
 ‘C-c M-g t’ (‘magit-log-trace-definition’)
      This command shows the log for the definition at point.
 
 ‘C-c M-g M’ (‘magit-log-merged’)
      This command reads a commit and a branch in shows a log concerning
      the merge of the former into the latter.  This shows multiple
      commits even in case of a fast-forward merge.
 
 ‘C-c M-g B’ (‘magit-blame’)
      This transient prefix command binds all blaming suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.
 
      For more information about this and the following commands also see
      *note Blaming::.
 
      In addition to the ‘magit-blame’ sub-transient, the dispatch
      transient also binds several blaming suffix commands directly.  See
      *note Blaming:: for information about those commands and bindings.
 
 ‘C-c M-g p’ (‘magit-blob-previous’)
      This command visits the previous blob which modified the current
      file.
 
 ‘C-c M-g n’ (‘magit-blob-next’)
      This command visits the next blob which modified the current file.
 
 ‘C-c M-g v’ (‘magit-find-file’)
      This command reads a revision and file and visits the respective
      blob.
 
 ‘C-c M-g V’ (‘magit-blob-visit-file’)
      This command visits the file from the working tree, corresponding
      to the current blob.  When visiting a blob or the version from the
      index, then it goes to the same location in the respective file in
      the working tree.
 
 ‘C-c M-g g’ (‘magit-status-here’)
      This command displays the status of the current repository in a
      buffer, like ‘magit-status’ does.  Additionally it tries to go to
      the position in that buffer, which corresponds to the position in
      the current file-visiting buffer (if any).
 
 ‘C-c M-g G’ (‘magit-display-repository-buffer’)
      This command reads and displays a Magit buffer belonging to the
      current repository, without refreshing it.
 
 ‘C-c M-g c’ (‘magit-commit’)
      This transient prefix command binds the following suffix commands
      along with the appropriate infix arguments and displays them in a
      temporary buffer until a suffix is invoked.  See *note Initiating a
      Commit::.
 
 ‘C-c M-g e’ (‘magit-edit-line-commit’)
      This command makes the commit editable that added the current line.
 
      With a prefix argument it makes the commit editable that removes
      the line, if any.  The commit is determined using ‘git blame’ and
      made editable using ‘git rebase --interactive’ if it is reachable
      from ‘HEAD’, or by checking out the commit (or a branch that points
      at it) otherwise.
 
 
 File: magit.info,  Node: Minor Mode for Buffers Visiting Blobs,  Prev: Commands for Buffers Visiting Files,  Up: Miscellaneous
 
 8.11 Minor Mode for Buffers Visiting Blobs
 ==========================================
 
 The ‘magit-blob-mode’ enables certain Magit features in blob-visiting
 buffers.  Such buffers can be created using ‘magit-find-file’ and some
 of the commands mentioned below, which also take care of turning on this
 minor mode.  Currently this mode only establishes a few key bindings,
 but this might be extended.
 
 ‘p’ (‘magit-blob-previous’)
      Visit the previous blob which modified the current file.
 
 ‘n’ (‘magit-blob-next’)
      Visit the next blob which modified the current file.
 
 ‘q’ (‘magit-kill-this-buffer’)
      Kill the current buffer.
 
 
 File: magit.info,  Node: Customizing,  Next: Plumbing,  Prev: Miscellaneous,  Up: Top
 
 9 Customizing
 *************
 
 Both Git and Emacs are highly customizable.  Magit is both a Git
 porcelain as well as an Emacs package, so it makes sense to customize it
 using both Git variables as well as Emacs options.  However this
 flexibility doesn’t come without problems, including but not limited to
 the following.
 
    • Some Git variables automatically have an effect in Magit without
      requiring any explicit support.  Sometimes that is desirable - in
      other cases, it breaks Magit.
 
      When a certain Git setting breaks Magit but you want to keep using
      that setting on the command line, then that can be accomplished by
      overriding the value for Magit only by appending something like
      ‘("-c" "some.variable=compatible-value")’ to
      ‘magit-git-global-arguments’.
 
    • Certain settings like ‘fetch.prune=true’ are respected by Magit
      commands (because they simply call the respective Git command) but
      their value is not reflected in the respective transient buffers.
      In this case the ‘--prune’ argument in ‘magit-fetch’ might be
      active or inactive, but that doesn’t keep the Git variable from
      being honored by the suffix commands anyway.  So pruning might
      happen despite the ‘--prune’ arguments being displayed in a way
      that seems to indicate that no pruning will happen.
 
    I intend to address these and similar issues in a future release.
 
 * Menu:
 
 * Per-Repository Configuration::
 * Essential Settings::
 
 
 File: magit.info,  Node: Per-Repository Configuration,  Next: Essential Settings,  Up: Customizing
 
 9.1 Per-Repository Configuration
 ================================
 
 Magit can be configured on a per-repository level using both Git
 variables as well as Emacs options.
 
    To set a Git variable for one repository only, simply set it in
 ‘/path/to/repo/.git/config’ instead of ‘$HOME/.gitconfig’ or
 ‘/etc/gitconfig’.  See *note (gitman)git-config::.
 
    Similarly, Emacs options can be set for one repository only by
 editing ‘/path/to/repo/.dir-locals.el’.  See *note (emacs)Directory
 Variables::.  For example to disable automatic refreshes of
 file-visiting buffers in just one huge repository use this:
 
    • ‘/path/to/huge/repo/.dir-locals.el’
 
           ((nil . ((magit-refresh-buffers . nil))))
 
    It might only be costly to insert certain information into Magit
 buffers for repositories that are exceptionally large, in which case you
 can disable the respective section inserters just for that repository:
 
    • ‘/path/to/tag/invested/repo/.dir-locals.el’
 
           ((magit-status-mode
             . ((eval . (magit-disable-section-inserter 'magit-insert-tags-header)))))
 
  -- Function: magit-disable-section-inserter fn
      This function disables the section inserter FN in the current
      repository.  It is only intended for use in ‘.dir-locals.el’ and
      ‘.dir-locals-2.el’.
 
    If you want to apply the same settings to several, but not all,
 repositories then keeping the repository-local config files in sync
 would quickly become annoying.  To avoid that you can create config
 files for certain classes of repositories (e.g., "huge repositories")
 and then include those files in the per-repository config files.  For
 example:
 
    • ‘/path/to/huge/repo/.git/config’
 
           [include]
                   path = /path/to/huge-gitconfig
 
    • ‘/path/to/huge-gitconfig’
 
           [status]
                   showUntrackedFiles = no
 
    • ‘$HOME/.emacs.d/init.el’
 
           (dir-locals-set-class-variables 'huge-git-repository
              '((nil . ((magit-refresh-buffers . nil)))))
 
           (dir-locals-set-directory-class
              "/path/to/huge/repo/" 'huge-git-repository)
 
 
 File: magit.info,  Node: Essential Settings,  Prev: Per-Repository Configuration,  Up: Customizing
 
 9.2 Essential Settings
 ======================
 
 The next three sections list and discuss several variables that many
 users might want to customize, for safety and/or performance reasons.
 
 * Menu:
 
 * Safety::
 * Performance::
 * Global Bindings::
 
 
 File: magit.info,  Node: Safety,  Next: Performance,  Up: Essential Settings
 
 9.2.1 Safety
 ------------
 
 This section discusses various variables that you might want to change
 (or *not* change) for safety reasons.
 
    Git keeps *committed* changes around long enough for users to recover
 changes they have accidentally been deleted.  It does not do the same
 for *uncommitted* changes in the working tree and not even the index
 (the staging area).  Because Magit makes it so easy to modify
 uncommitted changes, it also makes it easy to shoot yourself in the foot
 in the process.  For that reason Magit provides three global modes that
 save *tracked* files to work-in-progress references after or before
 certain actions.  See *note Wip Modes::.
 
    These modes are not enabled by default because of performance
 concerns.  Instead a lot of potentially destructive commands require
 confirmation every time they are used.  In many cases this can be
 disabled by adding a symbol to ‘magit-no-confirm’ (see *note Completion
 and Confirmation::).  If you enable the various wip modes then you
 should add ‘safe-with-wip’ to this list.
 
    Similarly it isn’t necessary to require confirmation before moving a
 file to the system trash - if you trashed a file by mistake then you can
 recover it from there.  Option ‘magit-delete-by-moving-to-trash’
 controls whether the system trash is used, which is the case by default.
 Nevertheless, ‘trash’ isn’t a member of ‘magit-no-confirm’ - you might
 want to change that.
 
    By default buffers visiting files are automatically reverted when the
 visited file changes on disk.  This isn’t as risky as it might seem, but
 to make an informed decision you should see *note Risk of Reverting
 Automatically::.
 
 
 File: magit.info,  Node: Performance,  Next: Global Bindings,  Prev: Safety,  Up: Essential Settings
 
 9.2.2 Performance
 -----------------
 
 After Magit has run ‘git’ for side-effects, it also refreshes the
 current Magit buffer and the respective status buffer.  This is
 necessary because otherwise outdated information might be displayed
 without the user noticing.  Magit buffers are updated by recreating
 their content from scratch, which makes updating simpler and less
 error-prone, but also more costly.  Keeping it simple and just
 re-creating everything from scratch is an old design decision and
 departing from that will require major refactoring.
 
    Meanwhile you can tell Magit to only automatically refresh the
 current Magit buffer, but not the status buffer.  If you do that, then
 the status buffer is only refreshed automatically if it is the current
 buffer.
 
      (setq magit-refresh-status-buffer nil)
 
    You should also check whether any third-party packages have added
 anything to ‘magit-refresh-buffer-hook’, ‘magit-pre-refresh-hook’, and
 ‘magit-post-refresh-hook’.  If so, then check whether those additions
 impact performance significantly.
 
    Magit can be told to refresh buffers verbosely using ‘M-x
 magit-toggle-verbose-refresh’.  Enabling this helps figuring out which
 sections are bottlenecks.  Each line printed to the ‘*Messages*’ buffer
 contains a section name, the number of seconds it took to show this
 section, and from 0 to 2 exclamation marks: the more exclamation marks
 the slower the section is.
 
    Magit also reverts buffers for visited files located inside the
 current repository when the visited file changes on disk.  That is
 implemented on top of ‘auto-revert-mode’ from the built-in library
 ‘autorevert’.  To figure out whether that impacts performance, check
 whether performance is significantly worse, when many buffers exist
 and/or when some buffers visit files using TRAMP.  If so, then this
 should help.
 
      (setq auto-revert-buffer-list-filter
            'magit-auto-revert-repository-buffer-p)
 
    For alternative approaches see *note Automatic Reverting of
 File-Visiting Buffers::.
 
    If you have enabled any features that are disabled by default, then
 you should check whether they impact performance significantly.  It’s
 likely that they were not enabled by default because it is known that
 they reduce performance at least in large repositories.
 
    If performance is only slow inside certain unusually large
 repositories, then you might want to disable certain features on a
 per-repository or per-repository-class basis only.  See *note
 Per-Repository Configuration::.  For example it takes a long time to
 determine the next and current tag in repository with exceptional
 numbers of tags.  It would therefore be a good idea to disable
 ‘magit-insert-tags-headers’, as explained at the mentioned node.
 
 * Menu:
 
 * Microsoft Windows Performance::
 * MacOS Performance::
 
 Log Performance
 ...............
 
 When showing logs, Magit limits the number of commits initially shown in
 the hope that this avoids unnecessary work.  When ‘--graph’ is used,
 then this unfortunately does not have the desired effect for large
 histories.  Junio, Git’s maintainer, said on the git mailing list
 (<https://www.spinics.net/lists/git/msg232230.html>): "‘--graph’ wants
 to compute the whole history and the max-count only affects the output
 phase after ‘--graph’ does its computation".
 
    In other words, it’s not that Git is slow at outputting the
 differences, or that Magit is slow at parsing the output - the problem
 is that Git first goes outside and has a smoke.
 
    We actually work around this issue by limiting the number of commits
 not only by using ‘-<N>’ but by also using a range.  But unfortunately
 that’s not always possible.
 
    When more than a few thousand commits are shown, then the use of
 ‘--graph’ can slow things down.
 
    Using ‘--color --graph’ is even slower.  Magit uses code that is part
 of Emacs to turn control characters into faces.  That code is pretty
 slow and this is quite noticeable when showing a log with many branches
 and merges.  For that reason ‘--color’ is not enabled by default
 anymore.  Consider leaving it at that.
 
 Diff Performance
 ................
 
 If diffs are slow, then consider turning off some optional diff features
 by setting all or some of the following variables to ‘nil’:
 ‘magit-diff-highlight-indentation’, ‘magit-diff-highlight-trailing’,
 ‘magit-diff-paint-whitespace’, ‘magit-diff-highlight-hunk-body’, and
 ‘magit-diff-refine-hunk’.
 
    When showing a commit instead of some arbitrary diff, then some
 additional information is displayed.  Calculating this information can
 be quite expensive given certain circumstances.  If looking at a commit
 using ‘magit-revision-mode’ takes considerably more time than looking at
 the same commit in ‘magit-diff-mode’, then consider setting
 ‘magit-revision-insert-related-refs’ to ‘nil’.
 
    When you are often confronted with diffs that contain deleted files,
 then you might want to enable the ‘--irreversible-delete’ argument.  If
 you do that then diffs still show that a file was deleted but without
 also showing the complete deleted content of the file.  This argument is
 not available by default, see *note (transient)Enabling and Disabling
 Suffixes::.  Once you have done that you should enable it and save that
 setting, see *note (transient)Saving Values::.  You should do this in
 both the diff (‘d’) and the diff refresh (‘D’) transient popups.
 
 Refs Buffer Performance
 .......................
 
 When refreshing the "references buffer" is slow, then that’s usually
 because several hundred refs are being displayed.  The best way to
 address that is to display fewer refs, obviously.
 
    If you are not, or only mildly, interested in seeing the list of
 tags, then start by not displaying them:
 
      (remove-hook 'magit-refs-sections-hook 'magit-insert-tags)
 
    Then you should also make sure that the listed remote branches
 actually all exist.  You can do so by pruning branches which no longer
 exist using ‘f-pa’.
 
 Committing Performance
 ......................
 
 When you initiate a commit, then Magit by default automatically shows a
 diff of the changes you are about to commit.  For large commits this can
 take a long time, which is especially distracting when you are
 committing large amounts of generated data which you don’t actually
 intend to inspect before committing.  This behavior can be turned off
 using:
 
      (remove-hook 'server-switch-hook 'magit-commit-diff)
      (remove-hook 'with-editor-filter-visit-hook 'magit-commit-diff)
 
    Then you can type ‘C-c C-d’ to show the diff when you actually want
 to see it, but only then.  Alternatively you can leave the hook alone
 and just type ‘C-g’ in those cases when it takes too long to generate
 the diff.  If you do that, then you will end up with a broken diff
 buffer, but doing it this way has the advantage that you usually get to
 see the diff, which is useful because it increases the odds that you
 spot potential issues.
 
 
 File: magit.info,  Node: Microsoft Windows Performance,  Next: MacOS Performance,  Up: Performance
 
 Microsoft Windows Performance
 .............................
 
 In order to update the status buffer, ‘git’ has to be run a few dozen
 times.  That is problematic on Microsoft Windows, because that operating
 system is exceptionally slow at starting processes.  Sadly this is an
 issue that can only be fixed by Microsoft itself, and they don’t appear
 to be particularly interested in doing so.
 
    Beside the subprocess issue, there are also other Windows-specific
 performance issues.  Some of these have workarounds.  The maintainers of
 "Git for Windows" try to improve performance on Windows.  Always use the
 latest release in order to benefit from the latest performance tweaks.
 Magit too tries to work around some Windows-specific issues.
 
    According to some sources, setting the following Git variables can
 also help.
 
      git config --global core.preloadindex true   # default since v2.1
      git config --global core.fscache true        # default since v2.8
      git config --global gc.auto 256
 
    You should also check whether an anti-virus program is affecting
 performance.
 
 
 File: magit.info,  Node: MacOS Performance,  Prev: Microsoft Windows Performance,  Up: Performance
 
 MacOS Performance
 .................
 
 Before Emacs 26.1 child processes were created using ‘fork’ on macOS.
 That needlessly copied GUI resources, which is expensive.  The result
 was that forking took about 30 times as long on Darwin than on Linux,
 and because Magit starts many ‘git’ processes that made quite a
 difference.
 
    So make sure that you are using at least Emacs 26.1, in which case
 the faster ‘vfork’ will be used.  (The creation of child processes still
 takes about twice as long on Darwin compared to Linux.)  See (1) for
 more information.
 
    Additionally, ‘git’ installed from a package manager like ‘brew’ or
 ‘nix’ seems to be slower than the native executable.  Profile the ‘git’
 executable you’re running against the one at ‘/usr/bin/git’, and if you
 notice a notable difference try using the latter as
 ‘magit-git-executable’.
 
    ---------- Footnotes ----------
 
    (1) 
 <https://lists.gnu.org/archive/html/bug-gnu-emacs/2017-04/msg00201.html>
 
 
 File: magit.info,  Node: Global Bindings,  Prev: Performance,  Up: Essential Settings
 
 9.2.3 Global Bindings
 ---------------------
 
  -- User Option: magit-define-global-key-bindings
      This option controls which set of Magit key bindings, if any, may
      be added to the global keymap, even before Magit is first used in
      the current Emacs session.
 
         • If the value is ‘nil’, no bindings are added.
 
         • If ‘default’, maybe add:
 
           ‘C-x g’     ‘magit-status’
           ‘C-x M-g’   ‘magit-dispatch’
           ‘C-c M-g’   ‘magit-file-dispatch’
 
         • If ‘recommended’, maybe add:
 
           ‘C-x g’   ‘magit-status’
           ‘C-c g’   ‘magit-dispatch’
           ‘C-c f’   ‘magit-file-dispatch’
 
           These bindings are strongly recommended, but we cannot use
           them by default, because the ‘C-c <LETTER>’ namespace is
           strictly reserved for bindings added by the user (see *note
           (elisp)Key Binding Conventions::).
 
      The bindings in the chosen set may be added when ‘after-init-hook’
      is run.  Each binding is added if, and only if, at that time no
      other key is bound to the same command, and no other command is
      bound to the same key.  In other words we try to avoid adding
      bindings that are unnecessary, as well as bindings that conflict
      with other bindings.
 
      Adding these bindings is delayed until ‘after-init-hook’ is run to
      allow users to set the variable anywhere in their init file
      (without having to make sure to do so before ‘magit’ is loaded or
      autoloaded) and to increase the likelihood that all the potentially
      conflicting user bindings have already been added.
 
      To set this variable use either ‘setq’ or the Custom interface.  Do
      not use the function ‘customize-set-variable’ because doing that
      would cause Magit to be loaded immediately, when that form is
      evaluated (this differs from ‘custom-set-variables’, which doesn’t
      load the libraries that define the customized variables).
 
      Setting this variable has no effect if ‘after-init-hook’ has
      already been run.
 
 
 File: magit.info,  Node: Plumbing,  Next: FAQ,  Prev: Customizing,  Up: Top
 
 10 Plumbing
 ***********
 
 The following sections describe how to use several of Magit’s core
 abstractions to extend Magit itself or implement a separate extension.
 
    A few of the low-level features used by Magit have been factored out
 into separate libraries/packages, so that they can be used by other
 packages, without having to depend on Magit.  See *note
 (with-editor)Top:: for information about ‘with-editor’.  ‘transient’
 doesn’t have a manual yet.
 
    If you are trying to find an unused key that you can bind to a
 command provided by your own Magit extension, then checkout
 <https://github.com/magit/magit/wiki/Plugin-Dispatch-Key-Registry>.
 
 * Menu:
 
 * Calling Git::
 * Section Plumbing::
 * Refreshing Buffers::
 * Conventions::
 
 
 File: magit.info,  Node: Calling Git,  Next: Section Plumbing,  Up: Plumbing
 
 10.1 Calling Git
 ================
 
 Magit provides many specialized functions for calling Git.  All of these
 functions are defined in either ‘magit-git.el’ or ‘magit-process.el’ and
 have one of the prefixes ‘magit-run-’, ‘magit-call-’, ‘magit-start-’, or
 ‘magit-git-’ (which is also used for other things).
 
    All of these functions accept an indefinite number of arguments,
 which are strings that specify command line arguments for Git (or in
 some cases an arbitrary executable).  These arguments are flattened
 before being passed on to the executable; so instead of strings they can
 also be lists of strings and arguments that are ‘nil’ are silently
 dropped.  Some of these functions also require a single mandatory
 argument before these command line arguments.
 
    Roughly speaking, these functions run Git either to get some value or
 for side-effects.  The functions that return a value are useful to
 collect the information necessary to populate a Magit buffer, while the
 others are used to implement Magit commands.
 
    The functions in the value-only group always run synchronously, and
 they never trigger a refresh.  The function in the side-effect group can
 be further divided into subgroups depending on whether they run Git
 synchronously or asynchronously, and depending on whether they trigger a
 refresh when the executable has finished.
 
 * Menu:
 
 * Getting a Value from Git::
 * Calling Git for Effect::
 
 
 File: magit.info,  Node: Getting a Value from Git,  Next: Calling Git for Effect,  Up: Calling Git
 
 10.1.1 Getting a Value from Git
 -------------------------------
 
 These functions run Git in order to get a value, an exit status, or
 output.  Of course you could also use them to run Git commands that have
 side-effects, but that should be avoided.
 
  -- Function: magit-git-exit-code &rest args
      Executes git with ARGS and returns its exit code.
 
  -- Function: magit-git-success &rest args
      Executes git with ARGS and returns ‘t’ if the exit code is ‘0’,
      ‘nil’ otherwise.
 
  -- Function: magit-git-failure &rest args
      Executes git with ARGS and returns ‘t’ if the exit code is ‘1’,
      ‘nil’ otherwise.
 
  -- Function: magit-git-true &rest args
      Executes git with ARGS and returns ‘t’ if the first line printed by
      git is the string "true", ‘nil’ otherwise.
 
  -- Function: magit-git-false &rest args
      Executes git with ARGS and returns ‘t’ if the first line printed by
      git is the string "false", ‘nil’ otherwise.
 
  -- Function: magit-git-insert &rest args
      Executes git with ARGS and inserts its output at point.
 
  -- Function: magit-git-string &rest args
      Executes git with ARGS and returns the first line of its output.
      If there is no output or if it begins with a newline character,
      then this returns ‘nil’.
 
  -- Function: magit-git-lines &rest args
      Executes git with ARGS and returns its output as a list of lines.
      Empty lines anywhere in the output are omitted.
 
  -- Function: magit-git-items &rest args
      Executes git with ARGS and returns its null-separated output as a
      list.  Empty items anywhere in the output are omitted.
 
      If the value of option ‘magit-git-debug’ is non-nil and git exits
      with a non-zero exit status, then warn about that in the echo area
      and add a section containing git’s standard error in the current
      repository’s process buffer.
 
  -- Function: magit-process-git destination &rest args
      Calls Git synchronously in a separate process, returning its exit
      code.  DESTINATION specifies how to handle the output, like for
      ‘call-process’, except that file handlers are supported.  Enables
      Cygwin’s "noglob" option during the call and ensures unix eol
      conversion.
 
  -- Function: magit-process-file process &optional infile buffer display
           &rest args
      Processes files synchronously in a separate process.  Identical to
      ‘process-file’ but temporarily enables Cygwin’s "noglob" option
      during the call and ensures unix eol conversion.
 
    If an error occurs when using one of the above functions, then that
 is usually due to a bug, i.e., using an argument which is not actually
 supported.  Such errors are usually not reported, but when they occur we
 need to be able to debug them.
 
  -- User Option: magit-git-debug
      Whether to report errors that occur when using ‘magit-git-insert’,
      ‘magit-git-string’, ‘magit-git-lines’, or ‘magit-git-items’.  This
      does not actually raise an error.  Instead a message is shown in
      the echo area, and git’s standard error is insert into a new
      section in the current repository’s process buffer.
 
  -- Function: magit-git-str &rest args
      This is a variant of ‘magit-git-string’ that ignores the option
      ‘magit-git-debug’.  It is mainly intended to be used while handling
      errors in functions that do respect that option.  Using such a
      function while handing an error could cause yet another error and
      therefore lead to an infinite recursion.  You probably won’t ever
      need to use this function.
 
 
 File: magit.info,  Node: Calling Git for Effect,  Prev: Getting a Value from Git,  Up: Calling Git
 
 10.1.2 Calling Git for Effect
 -----------------------------
 
 These functions are used to run git to produce some effect.  Most Magit
 commands that actually run git do so by using such a function.
 
    Because we do not need to consume git’s output when using these
 functions, their output is instead logged into a per-repository buffer,
 which can be shown using ‘$’ from a Magit buffer or ‘M-x magit-process’
 elsewhere.
 
    These functions can have an effect in two distinct ways.  Firstly,
 running git may change something, i.e., create or push a new commit.
 Secondly, that change may require that Magit buffers are refreshed to
 reflect the changed state of the repository.  But refreshing isn’t
 always desirable, so only some of these functions do perform such a
 refresh after git has returned.
 
    Sometimes it is useful to run git asynchronously.  For example, when
 the user has just initiated a push, then there is no reason to make her
 wait until that has completed.  In other cases it makes sense to wait
 for git to complete before letting the user do something else.  For
 example after staging a change it is useful to wait until after the
 refresh because that also automatically moves to the next change.
 
  -- Function: magit-call-git &rest args
      Calls git synchronously with ARGS.
 
  -- Function: magit-call-process program &rest args
      Calls PROGRAM synchronously with ARGS.
 
  -- Function: magit-run-git &rest args
      Calls git synchronously with ARGS and then refreshes.
 
  -- Function: magit-run-git-with-input &rest args
      Calls git synchronously with ARGS and sends it the content of the
      current buffer on standard input.
 
      If the current buffer’s ‘default-directory’ is on a remote
      filesystem, this function actually runs git asynchronously.  But
      then it waits for the process to return, so the function itself is
      synchronous.
 
  -- Function: magit-git &rest args
      Calls git synchronously with ARGS for side-effects only.  This
      function does not refresh the buffer.
 
  -- Function: magit-git-wash washer &rest args
      Execute Git with ARGS, inserting washed output at point.  Actually
      first insert the raw output at point.  If there is no output call
      ‘magit-cancel-section’.  Otherwise temporarily narrow the buffer to
      the inserted text, move to its beginning, and then call function
      WASHER with ARGS as its sole argument.
 
    And now for the asynchronous variants.
 
  -- Function: magit-run-git-async &rest args
      Start Git, prepare for refresh, and return the process object.
      ARGS is flattened and then used as arguments to Git.
 
      Display the command line arguments in the echo area.
 
      After Git returns some buffers are refreshed: the buffer that was
      current when this function was called (if it is a Magit buffer and
      still alive), as well as the respective Magit status buffer.
      Unmodified buffers visiting files that are tracked in the current
      repository are reverted if ‘magit-revert-buffers’ is non-nil.
 
  -- Function: magit-run-git-with-editor &rest args
      Export GIT_EDITOR and start Git.  Also prepare for refresh and
      return the process object.  ARGS is flattened and then used as
      arguments to Git.
 
      Display the command line arguments in the echo area.
 
      After Git returns some buffers are refreshed: the buffer that was
      current when this function was called (if it is a Magit buffer and
      still alive), as well as the respective Magit status buffer.
 
  -- Function: magit-start-git input &rest args
      Start Git, prepare for refresh, and return the process object.
 
      If INPUT is non-nil, it has to be a buffer or the name of an
      existing buffer.  The buffer content becomes the processes standard
      input.
 
      Option ‘magit-git-executable’ specifies the Git executable and
      option ‘magit-git-global-arguments’ specifies constant arguments.
      The remaining arguments ARGS specify arguments to Git.  They are
      flattened before use.
 
      After Git returns, some buffers are refreshed: the buffer that was
      current when this function was called (if it is a Magit buffer and
      still alive), as well as the respective Magit status buffer.
      Unmodified buffers visiting files that are tracked in the current
      repository are reverted if ‘magit-revert-buffers’ is non-nil.
 
  -- Function: magit-start-process &rest args
      Start PROGRAM, prepare for refresh, and return the process object.
 
      If optional argument INPUT is non-nil, it has to be a buffer or the
      name of an existing buffer.  The buffer content becomes the
      processes standard input.
 
      The process is started using ‘start-file-process’ and then setup to
      use the sentinel ‘magit-process-sentinel’ and the filter
      ‘magit-process-filter’.  Information required by these functions is
      stored in the process object.  When this function returns the
      process has not started to run yet so it is possible to override
      the sentinel and filter.
 
      After the process returns, ‘magit-process-sentinel’ refreshes the
      buffer that was current when ‘magit-start-process’ was called (if
      it is a Magit buffer and still alive), as well as the respective
      Magit status buffer.  Unmodified buffers visiting files that are
      tracked in the current repository are reverted if
      ‘magit-revert-buffers’ is non-nil.
 
  -- Variable: magit-this-process
      The child process which is about to start.  This can be used to
      change the filter and sentinel.
 
  -- Variable: magit-process-raise-error
      When this is non-nil, then ‘magit-process-sentinel’ raises an error
      if git exits with a non-zero exit status.  For debugging purposes.
 
 
 File: magit.info,  Node: Section Plumbing,  Next: Refreshing Buffers,  Prev: Calling Git,  Up: Plumbing
 
 10.2 Section Plumbing
 =====================
 
 * Menu:
 
 * Creating Sections::
 * Section Selection::
 * Matching Sections::
 
 
 File: magit.info,  Node: Creating Sections,  Next: Section Selection,  Up: Section Plumbing
 
 10.2.1 Creating Sections
 ------------------------
 
  -- Macro: magit-insert-section &rest args
      Insert a section at point.
 
      TYPE is the section type, a symbol.  Many commands that act on the
      current section behave differently depending on that type.  Also if
      a variable ‘magit-TYPE-section-map’ exists, then use that as the
      text-property ‘keymap’ of all text belonging to the section (but
      this may be overwritten in subsections).  TYPE can also have the
      form ‘(eval FORM)’ in which case FORM is evaluated at runtime.
 
      Optional VALUE is the value of the section, usually a string that
      is required when acting on the section.
 
      When optional HIDE is non-nil collapse the section body by default,
      i.e., when first creating the section, but not when refreshing the
      buffer.  Otherwise, expand it by default.  This can be overwritten
      using ‘magit-section-set-visibility-hook’.  When a section is
      recreated during a refresh, then the visibility of predecessor is
      inherited and HIDE is ignored (but the hook is still honored).
 
      BODY is any number of forms that actually insert the section’s
      heading and body.  Optional NAME, if specified, has to be a symbol,
      which is then bound to the struct of the section being inserted.
 
      Before BODY is evaluated the ‘start’ of the section object is set
      to the value of ‘point’ and after BODY was evaluated its ‘end’ is
      set to the new value of ‘point’; BODY is responsible for moving
      ‘point’ forward.
 
      If it turns out inside BODY that the section is empty, then
      ‘magit-cancel-section’ can be used to abort and remove all traces
      of the partially inserted section.  This can happen when creating a
      section by washing Git’s output and Git didn’t actually output
      anything this time around.
 
  -- Function: magit-insert-heading &rest args
      Insert the heading for the section currently being inserted.
 
      This function should only be used inside ‘magit-insert-section’.
 
      When called without any arguments, then just set the ‘content’ slot
      of the object representing the section being inserted to a marker
      at ‘point’.  The section should only contain a single line when
      this function is used like this.
 
      When called with arguments ARGS, which have to be strings, then
      insert those strings at point.  The section should not contain any
      text before this happens and afterwards it should again only
      contain a single line.  If the ‘face’ property is set anywhere
      inside any of these strings, then insert all of them unchanged.
      Otherwise use the ‘magit-section-heading’ face for all inserted
      text.
 
      The ‘content’ property of the section struct is the end of the
      heading (which lasts from ‘start’ to ‘content’) and the beginning
      of the body (which lasts from ‘content’ to ‘end’).  If the value of
      ‘content’ is nil, then the section has no heading and its body
      cannot be collapsed.  If a section does have a heading then its
      height must be exactly one line, including a trailing newline
      character.  This isn’t enforced; you are responsible for getting it
      right.  The only exception is that this function does insert a
      newline character if necessary.
 
  -- Function: magit-cancel-section
      Cancel the section currently being inserted.  This exits the
      innermost call to ‘magit-insert-section’ and removes all traces of
      what has already happened inside that call.
 
  -- Function: magit-define-section-jumper sym title &optional value
      Define an interactive function to go to section SYM.  TITLE is the
      displayed title of the section.
 
 
 File: magit.info,  Node: Section Selection,  Next: Matching Sections,  Prev: Creating Sections,  Up: Section Plumbing
 
 10.2.2 Section Selection
 ------------------------
 
  -- Function: magit-current-section
      Return the section at point.
 
  -- Function: magit-region-sections &optional condition multiple
      Return a list of the selected sections.
 
      When the region is active and constitutes a valid section
      selection, then return a list of all selected sections.  This is
      the case when the region begins in the heading of a section and
      ends in the heading of the same section or in that of a sibling
      section.  If optional MULTIPLE is non-nil, then the region cannot
      begin and end in the same section.
 
      When the selection is not valid, then return nil.  In this case,
      most commands that can act on the selected sections will instead
      act on the section at point.
 
      When the region looks like it would in any other buffer then the
      selection is invalid.  When the selection is valid then the region
      uses the ‘magit-section-highlight’ face.  This does not apply to
      diffs where things get a bit more complicated, but even here if the
      region looks like it usually does, then that’s not a valid
      selection as far as this function is concerned.
 
      If optional CONDITION is non-nil, then the selection not only has
      to be valid; all selected sections additionally have to match
      CONDITION, or nil is returned.  See ‘magit-section-match’ for the
      forms CONDITION can take.
 
  -- Function: magit-region-values &optional condition multiple
      Return a list of the values of the selected sections.
 
      Return the values that themselves would be returned by
      ‘magit-region-sections’ (which see).
 
 
 File: magit.info,  Node: Matching Sections,  Prev: Section Selection,  Up: Section Plumbing
 
 10.2.3 Matching Sections
 ------------------------
 
 ‘M-x magit-describe-section-briefly’
      Show information about the section at point.  This command is
      intended for debugging purposes.
 
  -- Function: magit-section-ident section
      Return an unique identifier for SECTION.  The return value has the
      form ‘((TYPE . VALUE)...)’.
 
  -- Function: magit-get-section ident &optional root
      Return the section identified by IDENT.  IDENT has to be a list as
      returned by ‘magit-section-ident’.
 
  -- Function: magit-section-match condition &optional section
      Return ‘t’ if SECTION matches CONDITION.  SECTION defaults to the
      section at point.  If SECTION is not specified and there also is no
      section at point, then return ‘nil’.
 
      CONDITION can take the following forms:
         • ‘(CONDITION...)’
 
           matches if any of the CONDITIONs matches.
 
         • ‘[CLASS...]’
 
           matches if the section’s class is the same as the first CLASS
           or a subclass of that; the section’s parent class matches the
           second CLASS; and so on.
 
         • ‘[* CLASS...]’
 
           matches sections that match ‘[CLASS...]’ and also recursively
           all their child sections.
 
         • ‘CLASS’
 
           matches if the section’s class is the same as CLASS or a
           subclass of that; regardless of the classes of the parent
           sections.
 
      Each CLASS should be a class symbol, identifying a class that
      derives from ‘magit-section’.  For backward compatibility CLASS can
      also be a "type symbol".  A section matches such a symbol if the
      value of its ‘type’ slot is ‘eq’.  If a type symbol has an entry in
      ‘magit--section-type-alist’, then a section also matches that type
      if its class is a subclass of the class that corresponds to the
      type as per that alist.
 
      Note that it is not necessary to specify the complete section
      lineage as printed by ‘magit-describe-section-briefly’, unless of
      course you want to be that precise.
 
  -- Function: magit-section-value-if condition &optional section
      If the section at point matches CONDITION, then return its value.
 
      If optional SECTION is non-nil then test whether that matches
      instead.  If there is no section at point and SECTION is nil, then
      return nil.  If the section does not match, then return nil.
 
      See ‘magit-section-match’ for the forms CONDITION can take.
 
  -- Function: magit-section-case &rest clauses
      Choose among clauses on the type of the section at point.
 
      Each clause looks like (CONDITION BODY...).  The type of the
      section is compared against each CONDITION; the BODY forms of the
      first match are evaluated sequentially and the value of the last
      form is returned.  Inside BODY the symbol ‘it’ is bound to the
      section at point.  If no clause succeeds or if there is no section
      at point return nil.
 
      See ‘magit-section-match’ for the forms CONDITION can take.
      Additionally a CONDITION of t is allowed in the final clause and
      matches if no other CONDITION match, even if there is no section at
      point.
 
  -- Variable: magit-root-section
      The root section in the current buffer.  All other sections are
      descendants of this section.  The value of this variable is set by
      ‘magit-insert-section’ and you should never modify it.
 
    For diff related sections a few additional tools exist.
 
  -- Function: magit-diff-type &optional section
      Return the diff type of SECTION.
 
      The returned type is one of the symbols ‘staged’, ‘unstaged’,
      ‘committed’, or ‘undefined’.  This type serves a similar purpose as
      the general type common to all sections (which is stored in the
      ‘type’ slot of the corresponding ‘magit-section’ struct) but takes
      additional information into account.  When the SECTION isn’t
      related to diffs and the buffer containing it also isn’t a
      diff-only buffer, then return nil.
 
      Currently the type can also be one of ‘tracked’ and ‘untracked’,
      but these values are not handled explicitly in every place they
      should be.  A possible fix could be to just return nil here.
 
      The section has to be a ‘diff’ or ‘hunk’ section, or a section
      whose children are of type ‘diff’.  If optional SECTION is nil,
      return the diff type for the current section.  In buffers whose
      major mode is ‘magit-diff-mode’ SECTION is ignored and the type is
      determined using other means.  In ‘magit-revision-mode’ buffers the
      type is always ‘committed’.
 
  -- Function: magit-diff-scope &optional section strict
      Return the diff scope of SECTION or the selected section(s).
 
      A diff’s "scope" describes what part of a diff is selected, it is a
      symbol, one of ‘region’, ‘hunk’, ‘hunks’, ‘file’, ‘files’, or
      ‘list’.  Do not confuse this with the diff "type", as returned by
      ‘magit-diff-type’.
 
      If optional SECTION is non-nil, then return the scope of that,
      ignoring the sections selected by the region.  Otherwise return the
      scope of the current section, or if the region is active and
      selects a valid group of diff related sections, the type of these
      sections, i.e., ‘hunks’ or ‘files’.  If SECTION (or if the current
      section that is nil) is a ‘hunk’ section and the region starts and
      ends inside the body of a that section, then the type is ‘region’.
 
      If optional STRICT is non-nil then return nil if the diff type of
      the section at point is ‘untracked’ or the section at point is not
      actually a ‘diff’ but a ‘diffstat’ section.
 
 
 File: magit.info,  Node: Refreshing Buffers,  Next: Conventions,  Prev: Section Plumbing,  Up: Plumbing
 
 10.3 Refreshing Buffers
 =======================
 
 All commands that create a new Magit buffer or change what is being
 displayed in an existing buffer do so by calling ‘magit-mode-setup’.
 Among other things, that function sets the buffer local values of
 ‘default-directory’ (to the top-level of the repository),
 ‘magit-refresh-function’, and ‘magit-refresh-args’.
 
    Buffers are refreshed by calling the function that is the local value
 of ‘magit-refresh-function’ (a function named ‘magit-*-refresh-buffer’,
 where ‘*’ may be something like ‘diff’) with the value of
 ‘magit-refresh-args’ as arguments.
 
  -- Macro: magit-mode-setup buffer switch-func mode refresh-func
           &optional refresh-args
      This function displays and selects BUFFER, turns on MODE, and
      refreshes a first time.
 
      This function displays and optionally selects BUFFER by calling
      ‘magit-mode-display-buffer’ with BUFFER, MODE and SWITCH-FUNC as
      arguments.  Then it sets the local value of
      ‘magit-refresh-function’ to REFRESH-FUNC and that of
      ‘magit-refresh-args’ to REFRESH-ARGS.  Finally it creates the
      buffer content by calling REFRESH-FUNC with REFRESH-ARGS as
      arguments.
 
      All arguments are evaluated before switching to BUFFER.
 
  -- Function: magit-mode-display-buffer buffer mode &optional
           switch-function
      This function display BUFFER in some window and select it.  BUFFER
      may be a buffer or a string, the name of a buffer.  The buffer is
      returned.
 
      Unless BUFFER is already displayed in the selected frame, store the
      previous window configuration as a buffer local value, so that it
      can later be restored by ‘magit-mode-bury-buffer’.
 
      The buffer is displayed and selected using SWITCH-FUNCTION.  If
      that is ‘nil’ then ‘pop-to-buffer’ is used if the current buffer’s
      major mode derives from ‘magit-mode’.  Otherwise ‘switch-to-buffer’
      is used.
 
  -- Variable: magit-refresh-function
      The value of this buffer-local variable is the function used to
      refresh the current buffer.  It is called with ‘magit-refresh-args’
      as arguments.
 
  -- Variable: magit-refresh-args
      The list of arguments used by ‘magit-refresh-function’ to refresh
      the current buffer.  ‘magit-refresh-function’ is called with these
      arguments.
 
      The value is usually set using ‘magit-mode-setup’, but in some
      cases it’s also useful to provide commands that can change the
      value.  For example, the ‘magit-diff-refresh’ transient can be used
      to change any of the arguments used to display the diff, without
      having to specify again which differences should be shown, but
      ‘magit-diff-more-context’, ‘magit-diff-less-context’ and
      ‘magit-diff-default-context’ change just the ‘-U<N>’ argument.  In
      both case this is done by changing the value of this variable and
      then calling this ‘magit-refresh-function’.
 
 
 File: magit.info,  Node: Conventions,  Prev: Refreshing Buffers,  Up: Plumbing
 
 10.4 Conventions
 ================
 
 Also see *note Completion and Confirmation::.
 
 * Menu:
 
 * Theming Faces::
 
 
 File: magit.info,  Node: Theming Faces,  Up: Conventions
 
 10.4.1 Theming Faces
 --------------------
 
 The default theme uses blue for local branches, green for remote
 branches, and goldenrod (brownish yellow) for tags.  When creating a new
 theme, you should probably follow that example.  If your theme already
 uses other colors, then stick to that.
 
    In older releases these reference faces used to have a background
 color and a box around them.  The basic default faces no longer do so,
 to make Magit buffers much less noisy, and you should follow that
 example at least with regards to boxes.  (Boxes were used in the past to
 work around a conflict between the highlighting overlay and text
 property backgrounds.  That’s no longer necessary because highlighting
 no longer causes other background colors to disappear.)  Alternatively
 you can keep the background color and/or box, but then have to take
 special care to adjust ‘magit-branch-current’ accordingly.  By default
 it looks mostly like ‘magit-branch-local’, but with a box (by default
 the former is the only face that uses a box, exactly so that it sticks
 out).  If the former also uses a box, then you have to make sure that it
 differs in some other way from the latter.
 
    The most difficult faces to theme are those related to diffs,
 headings, highlighting, and the region.  There are faces that fall into
 all four groups - expect to spend some time getting this right.
 
    The ‘region’ face in the default theme, in both the light and dark
 variants, as well as in many other themes, distributed with Emacs or by
 third-parties, is very ugly.  It is common to use a background color
 that really sticks out, which is ugly but if that were the only problem
 then it would be acceptable.  Unfortunately many themes also set the
 foreground color, which ensures that all text within the region is
 readable.  Without doing that there might be cases where some foreground
 color is too close to the region background color to still be readable.
 But it also means that text within the region loses all syntax
 highlighting.
 
    I consider the work that went into getting the ‘region’ face right to
 be a good indicator for the general quality of a theme.  My
 recommendation for the ‘region’ face is this: use a background color
 slightly different from the background color of the ‘default’ face, and
 do not set the foreground color at all.  So for a light theme you might
 use a light (possibly tinted) gray as the background color of ‘default’
 and a somewhat darker gray for the background of ‘region’.  That should
 usually be enough to not collide with the foreground color of any other
 face.  But if some other faces also set a light gray as background
 color, then you should also make sure it doesn’t collide with those (in
 some cases it might be acceptable though).
 
    Magit only uses the ‘region’ face when the region is "invalid" by its
 own definition.  In a Magit buffer the region is used to either select
 multiple sibling sections, so that commands which support it act on all
 of these sections instead of just the current section, or to select
 lines within a single hunk section.  In all other cases, the section is
 considered invalid and Magit won’t act on it.  But such invalid sections
 happen, either because the user has not moved point enough yet to make
 it valid or because she wants to use a non-magit command to act on the
 region, e.g., ‘kill-region’.
 
    So using the regular ‘region’ face for invalid sections is a feature.
 It tells the user that Magit won’t be able to act on it.  It’s
 acceptable if that face looks a bit odd and even (but less so) if it
 collides with the background colors of section headings and other things
 that have a background color.
 
    Magit highlights the current section.  If a section has subsections,
 then all of them are highlighted.  This is done using faces that have
 "highlight" in their names.  For most sections,
 ‘magit-section-highlight’ is used for both the body and the heading.
 Like the ‘region’ face, it should only set the background color to
 something similar to that of ‘default’.  The highlight background color
 must be different from both the ‘region’ background color and the
 ‘default’ background color.
 
    For diff related sections Magit uses various faces to highlight
 different parts of the selected section(s).  Note that hunk headings,
 unlike all other section headings, by default have a background color,
 because it is useful to have very visible separators between hunks.
 That face ‘magit-diff-hunk-heading’, should be different from both
 ‘magit-diff-hunk-heading-highlight’ and ‘magit-section-highlight’, as
 well as from ‘magit-diff-context’ and ‘magit-diff-context-highlight’.
 By default we do that by changing the foreground color.  Changing the
 background color would lead to complications, and there are already
 enough we cannot get around.  (Also note that it is generally a good
 idea for section headings to always be bold, but only for sections that
 have subsections).
 
    When there is a valid region selecting diff-related sibling sections,
 i.e., multiple files or hunks, then the bodies of all these sections use
 the respective highlight faces, but additionally the headings instead
 use one of the faces ‘magit-diff-file-heading-selection’ or
 ‘magit-diff-hunk-heading-selection’.  These faces have to be different
 from the regular highlight variants to provide explicit visual
 indication that the region is active.
 
    When theming diff related faces, start by setting the option
 ‘magit-diff-refine-hunk’ to ‘all’.  You might personally prefer to only
 refine the current hunk or not use hunk refinement at all, but some of
 the users of your theme want all hunks to be refined, so you have to
 cater to that.
 
    (Also turn on ‘magit-diff-highlight-indentation’,
 ‘magit-diff-highlight-trailing’, and ‘magit-diff-paint-whitespace’; and
 insert some whitespace errors into the code you use for testing.)
 
    For added lines you have to adjust three faces: ‘magit-diff-added’,
 ‘magit-diff-added-highlight’, and ‘diff-refined-added’.  Make sure that
 the latter works well with both of the former, as well as ‘smerge-other’
 and ‘diff-added’.  Then do the same for the removed lines, context
 lines, lines added by us, and lines added by them.  Also make sure the
 respective added, removed, and context faces use approximately the same
 saturation for both the highlighted and unhighlighted variants.  Also
 make sure the file and diff headings work nicely with context lines
 (e.g., make them look different).  Line faces should set both the
 foreground and the background color.  For example, for added lines use
 two different greens.
 
    It’s best if the foreground color of both the highlighted and the
 unhighlighted variants are the same, so you will need to have to find a
 color that works well on the highlight and unhighlighted background, the
 refine background, and the highlight context background.  When there is
 an hunk internal region, then the added- and removed-lines background
 color is used only within that region.  Outside the region the
 highlighted context background color is used.  This makes it easier to
 see what is being staged.  With an hunk internal region the hunk heading
 is shown using ‘magit-diff-hunk-heading-selection’, and so are the thin
 lines that are added around the lines that fall within the region.  The
 background color of that has to be distinct enough from the various
 other involved background colors.
 
    Nobody said this would be easy.  If your theme restricts itself to a
 certain set of colors, then you should make an exception here.
 Otherwise it would be impossible to make the diffs look good in each and
 every variation.  Actually you might want to just stick to the default
 definitions for these faces.  You have been warned.  Also please note
 that if you do not get this right, this will in some cases look to users
 like bugs in Magit - so please do it right or not at all.
 
 
 File: magit.info,  Node: FAQ,  Next: Debugging Tools,  Prev: Plumbing,  Up: Top
 
 Appendix A FAQ
 **************
 
 The next two nodes lists frequently asked questions.  For a list of
 frequently *and recently* asked questions, i.e., questions that haven’t
 made it into the manual yet, see
 <https://github.com/magit/magit/wiki/FAQ>.
 
    Please also see *note Debugging Tools::.
 
 * Menu:
 
 * FAQ - How to ...?::
 * FAQ - Issues and Errors::
 
 
 File: magit.info,  Node: FAQ - How to ...?,  Next: FAQ - Issues and Errors,  Up: FAQ
 
 A.1 FAQ - How to ...?
 =====================
 
 * Menu:
 
 * How to pronounce Magit?::
 * How to show git's output?::
 * How to install the gitman info manual?::
 * How to show diffs for gpg-encrypted files?::
 * How does branching and pushing work?::
 * Should I disable VC?::
 
 
 File: magit.info,  Node: How to pronounce Magit?,  Next: How to show git's output?,  Up: FAQ - How to ...?
 
 A.1.1 How to pronounce Magit?
 -----------------------------
 
 Either ‘mu[m's] git’ or ‘magi{c => t}’ is fine.
 
    The slogan is "It’s Magit!  The magical Git client", so it makes
 sense to pronounce Magit like magic, while taking into account that C
 and T do not sound the same.
 
    The German "Magie" is not pronounced the same as the English "magic",
 so if you speak German then you can use the above rationale to justify
 using the former pronunciation; ‘Mag{ie => it}’.
 
    You can also choose to use the former pronunciation just because you
 like it better.
 
    Also see <https://magit.vc/assets/videos/magic.mp4>.  Also see
 <https://emacs.stackexchange.com/questions/13696>.
 
 
 File: magit.info,  Node: How to show git's output?,  Next: How to install the gitman info manual?,  Prev: How to pronounce Magit?,  Up: FAQ - How to ...?
 
 A.1.2 How to show git’s output?
 -------------------------------
 
 To show the output of recently run git commands, press ‘$’ (or, if that
 isn’t available, ‘M-x magit-process-buffer’).  This will show a buffer
 containing a section per git invocation; as always press ‘TAB’ to expand
 or collapse them.
 
    By default, git’s output is only inserted into the process buffer if
 it is run for side-effects.  When the output is consumed in some way,
 also inserting it into the process buffer would be too expensive.  For
 debugging purposes, it’s possible to do so anyway by setting
 ‘magit-git-debug’ to ‘t’.
 
 
 File: magit.info,  Node: How to install the gitman info manual?,  Next: How to show diffs for gpg-encrypted files?,  Prev: How to show git's output?,  Up: FAQ - How to ...?
 
 A.1.3 How to install the gitman info manual?
 --------------------------------------------
 
 Git’s manpages can be exported as an info manual called ‘gitman’.
 Magit’s own info manual links to nodes in that manual instead of the
 actual manpages because Info doesn’t support linking to manpages.
 
    Unfortunately some distributions do not install the ‘gitman’ manual
 by default and you will have to install a separate documentation package
 to get it.
 
    Magit patches Info adding the ability to visit links to the ‘gitman’
 Info manual by instead viewing the respective manpage.  If you prefer
 that approach, then set the value of ‘magit-view-git-manual-method’ to
 one of the supported packages ‘man’ or ‘woman’, e.g.:
 
      (setq magit-view-git-manual-method 'man)
 
 
 File: magit.info,  Node: How to show diffs for gpg-encrypted files?,  Next: How does branching and pushing work?,  Prev: How to install the gitman info manual?,  Up: FAQ - How to ...?
 
 A.1.4 How to show diffs for gpg-encrypted files?
 ------------------------------------------------
 
 Git supports showing diffs for encrypted files, but has to be told to do
 so.  Since Magit just uses Git to get the diffs, configuring Git also
 affects the diffs displayed inside Magit.
 
      git config --global diff.gpg.textconv "gpg --no-tty --decrypt"
      echo "*.gpg filter=gpg diff=gpg" > .gitattributes
 
 
 File: magit.info,  Node: How does branching and pushing work?,  Next: Should I disable VC?,  Prev: How to show diffs for gpg-encrypted files?,  Up: FAQ - How to ...?
 
 A.1.5 How does branching and pushing work?
 ------------------------------------------
 
 Please see *note Branching:: and
 <https://emacsair.me/2016/01/17/magit-2.4>
 
 
 File: magit.info,  Node: Should I disable VC?,  Prev: How does branching and pushing work?,  Up: FAQ - How to ...?
 
 A.1.6 Should I disable VC?
 --------------------------
 
 If you don’t use VC (the built-in version control interface) then you
 might be tempted to disable it, not least because we used to recommend
 that you do that.
 
    We no longer recommend that you disable VC.  Doing so would break
 useful third-party packages (such as ‘diff-hl’), which depend on VC
 being enabled.
 
    If you choose to disable VC anyway, then you can do so by changing
 the value of ‘vc-handled-backends’.
 
 
 File: magit.info,  Node: FAQ - Issues and Errors,  Prev: FAQ - How to ...?,  Up: FAQ
 
 A.2 FAQ - Issues and Errors
 ===========================
 
 * Menu:
 
 * Magit is slow::
 * I changed several thousand files at once and now Magit is unusable::
 * I am having problems committing::
 * I am using MS Windows and cannot push with Magit::
 * I am using macOS and SOMETHING works in shell, but not in Magit: I am using macOS and SOMETHING works in shell but not in Magit.
 * Expanding a file to show the diff causes it to disappear::
 * Point is wrong in the COMMIT_EDITMSG buffer::
 * The mode-line information isn't always up-to-date::
 * A branch and tag sharing the same name breaks SOMETHING::
 * My Git hooks work on the command-line but not inside Magit::
 * git-commit-mode isn't used when committing from the command-line::
 * Point ends up inside invisible text when jumping to a file-visiting buffer::
 * I am no longer able to save popup defaults::
 
 
 File: magit.info,  Node: Magit is slow,  Next: I changed several thousand files at once and now Magit is unusable,  Up: FAQ - Issues and Errors
 
 A.2.1 Magit is slow
 -------------------
 
 See *note Performance:: and *note I changed several thousand files at
 once and now Magit is unusable::.
 
 
 File: magit.info,  Node: I changed several thousand files at once and now Magit is unusable,  Next: I am having problems committing,  Prev: Magit is slow,  Up: FAQ - Issues and Errors
 
 A.2.2 I changed several thousand files at once and now Magit is unusable
 ------------------------------------------------------------------------
 
 Magit is currently not expected to work well under such conditions.  It
 sure would be nice if it did.  Reaching satisfactory performance under
 such conditions will require some heavy refactoring.  This is no small
 task but I hope to eventually find the time to make it happen.
 
    But for now we recommend you use the command line to complete this
 one commit.  Also see *note Performance::.
 
 
 File: magit.info,  Node: I am having problems committing,  Next: I am using MS Windows and cannot push with Magit,  Prev: I changed several thousand files at once and now Magit is unusable,  Up: FAQ - Issues and Errors
 
 A.2.3 I am having problems committing
 -------------------------------------
 
 That likely means that Magit is having problems finding an appropriate
 emacsclient executable.  See *note (with-editor)Configuring
 With-Editor:: and *note (with-editor)Debugging::.
 
 
 File: magit.info,  Node: I am using MS Windows and cannot push with Magit,  Next: I am using macOS and SOMETHING works in shell but not in Magit,  Prev: I am having problems committing,  Up: FAQ - Issues and Errors
 
 A.2.4 I am using MS Windows and cannot push with Magit
 ------------------------------------------------------
 
 It’s almost certain that Magit is only incidental to this issue.  It is
 much more likely that this is a configuration issue, even if you can
 push on the command line.
 
    Detailed setup instructions can be found at
 <https://github.com/magit/magit/wiki/Pushing-with-Magit-from-Windows>.
 
 
 File: magit.info,  Node: I am using macOS and SOMETHING works in shell but not in Magit,  Next: Expanding a file to show the diff causes it to disappear,  Prev: I am using MS Windows and cannot push with Magit,  Up: FAQ - Issues and Errors
 
 A.2.5 I am using macOS and SOMETHING works in shell, but not in Magit
 ---------------------------------------------------------------------
 
 This usually occurs because Emacs doesn’t have the same environment
 variables as your shell.  Try installing and configuring
 <https://github.com/purcell/exec-path-from-shell>.  By default it
 synchronizes ‘$PATH’, which helps Magit find the same ‘git’ as the one
 you are using on the shell.
 
    If SOMETHING is "passphrase caching with gpg-agent for commit and/or
 tag signing", then you’ll also need to synchronize ‘$GPG_AGENT_INFO’.
 
 
 File: magit.info,  Node: Expanding a file to show the diff causes it to disappear,  Next: Point is wrong in the COMMIT_EDITMSG buffer,  Prev: I am using macOS and SOMETHING works in shell but not in Magit,  Up: FAQ - Issues and Errors
 
 A.2.6 Expanding a file to show the diff causes it to disappear
 --------------------------------------------------------------
 
 This is probably caused by a customization of a ‘diff.*’ Git variable.
 You probably set that variable for a reason, and should therefore only
 undo that setting in Magit by customizing ‘magit-git-global-arguments’.
 
 
 File: magit.info,  Node: Point is wrong in the COMMIT_EDITMSG buffer,  Next: The mode-line information isn't always up-to-date,  Prev: Expanding a file to show the diff causes it to disappear,  Up: FAQ - Issues and Errors
 
 A.2.7 Point is wrong in the ‘COMMIT_EDITMSG’ buffer
 ---------------------------------------------------
 
 Neither Magit nor ‘git-commit‘ fiddle with point in the buffer used to
 write commit messages, so something else must be doing it.
 
    You have probably globally enabled a mode which restores point in
 file-visiting buffers.  It might be a bit surprising, but when you write
 a commit message, then you are actually editing a file.
 
    So you have to figure out which package is doing it.  ‘saveplace’,
 ‘pointback’, and ‘session’ are likely candidates.  These snippets might
 help:
 
      (setq session-name-disable-regexp "\\(?:\\`'\\.git/[A-Z_]+\\'\\)")
 
      (with-eval-after-load 'pointback
        (lambda ()
          (when (or git-commit-mode git-rebase-mode)
            (pointback-mode -1))))
 
 
 File: magit.info,  Node: The mode-line information isn't always up-to-date,  Next: A branch and tag sharing the same name breaks SOMETHING,  Prev: Point is wrong in the COMMIT_EDITMSG buffer,  Up: FAQ - Issues and Errors
 
 A.2.8 The mode-line information isn’t always up-to-date
 -------------------------------------------------------
 
 Magit is not responsible for the version control information that is
 being displayed in the mode-line and looks something like ‘Git-master’.
 The built-in "Version Control" package, also known as "VC", updates that
 information, and can be told to do so more often:
 
      (setq auto-revert-check-vc-info t)
 
    But doing so isn’t good for performance.  For more (overly
 optimistic) information see *note (emacs)VC Mode Line::.
 
    If you don’t really care about seeing this information in the
 mode-line, but just don’t want to see _incorrect_ information, then
 consider simply not displaying it in the mode-line:
 
      (setq-default mode-line-format
                    (delete '(vc-mode vc-mode) mode-line-format))
 
 
 File: magit.info,  Node: A branch and tag sharing the same name breaks SOMETHING,  Next: My Git hooks work on the command-line but not inside Magit,  Prev: The mode-line information isn't always up-to-date,  Up: FAQ - Issues and Errors
 
 A.2.9 A branch and tag sharing the same name breaks SOMETHING
 -------------------------------------------------------------
 
 Or more generally, ambiguous refnames break SOMETHING.
 
    Magit assumes that refs are named non-ambiguously across the
 "refs/heads/", "refs/tags/", and "refs/remotes/" namespaces (i.e., all
 the names remain unique when those prefixes are stripped).  We consider
 ambiguous refnames unsupported and recommend that you use a
 non-ambiguous naming scheme.  However, if you do work with a repository
 that has ambiguous refnames, please report any issues you encounter, so
 that we can investigate whether there is a simple fix.
 
 
 File: magit.info,  Node: My Git hooks work on the command-line but not inside Magit,  Next: git-commit-mode isn't used when committing from the command-line,  Prev: A branch and tag sharing the same name breaks SOMETHING,  Up: FAQ - Issues and Errors
 
 A.2.10 My Git hooks work on the command-line but not inside Magit
 -----------------------------------------------------------------
 
 When Magit calls ‘git’ it adds a few global arguments including
 ‘--literal-pathspecs’ and the ‘git’ process started by Magit then passes
 that setting on to other ‘git’ process it starts itself.  It does so by
 setting the environment variable ‘GIT_LITERAL_PATHSPECS’, not by calling
 subprocesses with the ‘--literal-pathspecs’ argument.  You can therefore
 override this setting in hook scripts using ‘unset
 GIT_LITERAL_PATHSPECS’.
 
 
 File: magit.info,  Node: git-commit-mode isn't used when committing from the command-line,  Next: Point ends up inside invisible text when jumping to a file-visiting buffer,  Prev: My Git hooks work on the command-line but not inside Magit,  Up: FAQ - Issues and Errors
 
 A.2.11 ‘git-commit-mode’ isn’t used when committing from the command-line
 -------------------------------------------------------------------------
 
 The reason for this is that ‘git-commit.el’ has not been loaded yet
 and/or that the server has not been started yet.  These things have
 always already been taken care of when you commit from Magit because in
 order to do so, Magit has to be loaded and doing that involves loading
 ‘git-commit’ and starting the server.
 
    If you want to commit from the command-line, then you have to take
 care of these things yourself.  Your ‘init.el’ file should contain:
 
      (require 'git-commit)
      (server-mode)
 
    Instead of ‘(require ’git-commit)‘ you may also use:
 
      (load "/path/to/magit-autoloads.el")
 
    You might want to do that because loading ‘git-commit’ causes large
 parts of Magit to be loaded.
 
    There are also some variations of ‘(server-mode)’ that you might want
 to try.  Personally I use:
 
      (use-package server
        :config (or (server-running-p) (server-mode)))
 
    Now you can use:
 
      $ emacs&
      $ EDITOR=emacsclient git commit
 
    However you cannot use:
 
      $ killall emacs
      $ EDITOR="emacsclient --alternate-editor emacs" git commit
 
    This will actually end up using ‘emacs’, not ‘emacsclient’.  If you
 do this, then you can still edit the commit message but
 ‘git-commit-mode’ won’t be used and you have to exit ‘emacs’ to finish
 the process.
 
    Tautology ahead.  If you want to be able to use ‘emacsclient’ to
 connect to a running ‘emacs’ instance, even though no ‘emacs’ instance
 is running, then you cannot use ‘emacsclient’ directly.
 
    Instead you have to create a script that does something like this:
 
    Try to use ‘emacsclient’ (without using ‘--alternate-editor’).  If
 that succeeds, do nothing else.  Otherwise start ‘emacs &’ (and
 ‘init.el’ must call ‘server-start’) and try to use ‘emacsclient’ again.
 
 
 File: magit.info,  Node: Point ends up inside invisible text when jumping to a file-visiting buffer,  Next: I am no longer able to save popup defaults,  Prev: git-commit-mode isn't used when committing from the command-line,  Up: FAQ - Issues and Errors
 
 A.2.12 Point ends up inside invisible text when jumping to a file-visiting buffer
 ---------------------------------------------------------------------------------
 
 This can happen when you type ‘RET’ on a hunk to visit the respective
 file at the respective position.  One solution to this problem is to use
 ‘global-reveal-mode’.  It makes sure that text around point is always
 visible.  If that is too drastic for your taste, then you may instead
 use ‘magit-diff-visit-file-hook’ to reveal the text, possibly using
 ‘reveal-post-command’ or for Org buffers ‘org-reveal’.
 
 
 File: magit.info,  Node: I am no longer able to save popup defaults,  Prev: Point ends up inside invisible text when jumping to a file-visiting buffer,  Up: FAQ - Issues and Errors
 
 A.2.13 I am no longer able to save popup defaults
 -------------------------------------------------
 
 Magit used to use Magit-Popup to implement the transient popup menus.
 Now it used Transient instead, which is Magit-Popup’s successor.
 
    In the older Magit-Popup menus, it was possible to save user settings
 (e.g., setting the gpg signing key for commits) by using ‘C-c C-c’ in
 the popup buffer.  This would dismiss the popup, but save the settings
 as the defaults for future popups.
 
    When switching to Transient menus, this functionality is now
 available via ‘C-x C-s’ instead; the ‘C-x’ prefix has other options as
 well when using Transient, which will be displayed when it is typed.
 See <https://magit.vc/manual/transient/Saving-Values.html#Saving-Values>
 for more details.
 
 
 File: magit.info,  Node: Debugging Tools,  Next: Keystroke Index,  Prev: FAQ,  Up: Top
 
 B Debugging Tools
 *****************
 
 Magit and its dependencies provide a few debugging tools, and we
 appreciate it very much if you use those tools before reporting an
 issue.  Please include all relevant output when reporting an issue.
 
 ‘M-x magit-version’
      This command shows the currently used versions of Magit, Git, and
      Emacs in the echo area.  Non-interactively this just returns the
      Magit version.
 
 ‘M-x magit-emacs-Q-command’
      This command shows a debugging shell command in the echo area and
      adds it to the kill ring.  Paste that command into a shell and run
      it.
 
      This shell command starts ‘emacs’ with only ‘magit’ and its
      dependencies loaded.  Neither your configuration nor other
      installed packages are loaded.  This makes it easier to determine
      whether some issue lays with Magit or something else.
 
      If you run Magit from its Git repository, then you should be able
      to use ‘make emacs-Q’ instead of the output of this command.
 
 ‘M-x magit-toggle-git-debug’
      This command toggles whether additional git errors are reported.
 
      Magit basically calls git for one of these two reasons: for
      side-effects or to do something with its standard output.
 
      When git is run for side-effects then its output, including error
      messages, go into the process buffer which is shown when using ‘$’.
 
      When git’s output is consumed in some way, then it would be too
      expensive to also insert it into this buffer, but when this option
      is non-nil and git returns with a non-zero exit status, then at
      least its standard error is inserted into this buffer.
 
      This is only intended for debugging purposes.  Do not enable this
      permanently, that would negatively affect performance.  Also note
      that just because git exits with a non-zero exit status and prints
      an error message that usually doesn’t mean that it is an error as
      far as Magit is concerned, which is another reason we usually hide
      these error messages.  Whether some error message is relevant in
      the context of some unexpected behavior has to be judged on a case
      by case basis.
 
 ‘M-x magit-toggle-verbose-refresh’
      This command toggles whether Magit refreshes buffers verbosely.
      Enabling this helps figuring out which sections are bottlenecks.
      The additional output can be found in the ‘*Messages*’ buffer.
 
 ‘M-x magit-debug-git-executable’
      This command displays a buffer containing information about the
      available and used ‘git’ executable(s), and can be useful when
      investigating ‘exec-path’ issues.
 
      Also see *note Git Executable::.
 
 ‘M-x with-editor-debug’
      This command displays a buffer containing information about the
      available and used ‘emacsclient’ executable(s), and can be useful
      when investigating why Magit (or rather ‘with-editor’) cannot find
      an appropriate ‘emacsclient’ executable.
 
      Also see *note (with-editor)Debugging::.
 
 Please also see *note FAQ::.
 
 
 File: magit.info,  Node: Keystroke Index,  Next: Function and Command Index,  Prev: Debugging Tools,  Up: Top
 
 Appendix C Keystroke Index
 **************************
 
 
 * Menu:
 
 * !:                                     Running Git Manually.
                                                               (line  13)
 * ! !:                                   Running Git Manually.
                                                               (line  17)
 * ! a:                                   Running Git Manually.
                                                               (line  53)
 * ! b:                                   Running Git Manually.
                                                               (line  56)
 * ! g:                                   Running Git Manually.
                                                               (line  59)
 * ! k:                                   Running Git Manually.
                                                               (line  50)
 * ! m:                                   Running Git Manually.
                                                               (line  62)
 * ! p:                                   Running Git Manually.
                                                               (line  25)
 * ! s:                                   Running Git Manually.
                                                               (line  34)
 * ! S:                                   Running Git Manually.
                                                               (line  38)
 * $:                                     Viewing Git Output.  (line  17)
 * +:                                     Log Buffer.          (line  64)
 * + <1>:                                 Refreshing Diffs.    (line  65)
 * -:                                     Log Buffer.          (line  67)
 * - <1>:                                 Refreshing Diffs.    (line  62)
 * 0:                                     Refreshing Diffs.    (line  68)
 * 1:                                     Section Visibility.  (line  39)
 * 2:                                     Section Visibility.  (line  39)
 * 3:                                     Section Visibility.  (line  39)
 * 4:                                     Section Visibility.  (line  39)
 * 5:                                     Repository List.     (line 115)
 * ::                                     Running Git Manually.
                                                               (line  25)
 * =:                                     Log Buffer.          (line  59)
 * >:                                     Sparse checkouts.    (line  17)
 * > a:                                   Sparse checkouts.    (line  39)
 * > d:                                   Sparse checkouts.    (line  50)
 * > e:                                   Sparse checkouts.    (line  21)
 * > r:                                   Sparse checkouts.    (line  44)
 * > s:                                   Sparse checkouts.    (line  33)
 * ^:                                     Section Movement.    (line  28)
 * a:                                     Applying.            (line  34)
 * A:                                     Cherry Picking.      (line   9)
 * A A:                                   Cherry Picking.      (line  17)
 * A a:                                   Cherry Picking.      (line  23)
 * A A <1>:                               Cherry Picking.      (line  85)
 * A a <1>:                               Cherry Picking.      (line  91)
 * A d:                                   Cherry Picking.      (line  51)
 * A h:                                   Cherry Picking.      (line  40)
 * A n:                                   Cherry Picking.      (line  62)
 * A s:                                   Cherry Picking.      (line  72)
 * A s <1>:                               Cherry Picking.      (line  88)
 * B:                                     Bisecting.           (line   9)
 * b:                                     Blaming.             (line 115)
 * b <1>:                                 Branch Commands.     (line  13)
 * b <2>:                                 Editing Rebase Sequences.
                                                               (line  70)
 * B B:                                   Bisecting.           (line  16)
 * B b:                                   Bisecting.           (line  32)
 * b b:                                   Branch Commands.     (line  47)
 * b C:                                   Branch Commands.     (line  31)
 * b c:                                   Branch Commands.     (line  63)
 * B g:                                   Bisecting.           (line  36)
 * B k:                                   Bisecting.           (line  46)
 * b k:                                   Branch Commands.     (line 138)
 * b l:                                   Branch Commands.     (line  69)
 * B m:                                   Bisecting.           (line  40)
 * b m:                                   Branch Commands.     (line 149)
 * b n:                                   Branch Commands.     (line  54)
 * B r:                                   Bisecting.           (line  51)
 * B s:                                   Bisecting.           (line  26)
 * b s:                                   Branch Commands.     (line  91)
 * b S:                                   Branch Commands.     (line 118)
 * b x:                                   Branch Commands.     (line 123)
 * c:                                     Blaming.             (line 141)
 * C:                                     Cloning Repository.  (line  20)
 * c <1>:                                 Initiating a Commit. (line   9)
 * c <2>:                                 Editing Rebase Sequences.
                                                               (line  59)
 * C >:                                   Cloning Repository.  (line  38)
 * c a:                                   Initiating a Commit. (line  18)
 * c A:                                   Initiating a Commit. (line  59)
 * C b:                                   Cloning Repository.  (line  44)
 * C C:                                   Cloning Repository.  (line  28)
 * c c:                                   Initiating a Commit. (line  14)
 * C d:                                   Cloning Repository.  (line  55)
 * C e:                                   Cloning Repository.  (line  61)
 * c e:                                   Initiating a Commit. (line  21)
 * c f:                                   Initiating a Commit. (line  39)
 * c F:                                   Initiating a Commit. (line  46)
 * C m:                                   Cloning Repository.  (line  48)
 * C s:                                   Cloning Repository.  (line  32)
 * c s:                                   Initiating a Commit. (line  49)
 * c S:                                   Initiating a Commit. (line  56)
 * c w:                                   Initiating a Commit. (line  30)
 * C-<return>:                            Visiting Files and Blobs from a Diff.
                                                               (line  50)
 * C-<tab>:                               Section Visibility.  (line  14)
 * C-c C-a:                               Commit Pseudo Headers.
                                                               (line  16)
 * C-c C-b:                               Log Buffer.          (line  20)
 * C-c C-b <1>:                           Refreshing Diffs.    (line  84)
 * C-c C-c:                               Select from Log.     (line  21)
 * C-c C-c <1>:                           Editing Commit Messages.
                                                               (line  18)
 * C-c C-c <2>:                           Editing Rebase Sequences.
                                                               (line   7)
 * C-c C-d:                               Refreshing Diffs.    (line  75)
 * C-c C-d <1>:                           Editing Commit Messages.
                                                               (line  54)
 * C-c C-e:                               Commands Available in Diffs.
                                                               (line  24)
 * C-c C-f:                               Log Buffer.          (line  23)
 * C-c C-f <1>:                           Refreshing Diffs.    (line  87)
 * C-c C-i:                               Commit Pseudo Headers.
                                                               (line  13)
 * C-c C-k:                               Select from Log.     (line  26)
 * C-c C-k <1>:                           Editing Commit Messages.
                                                               (line  22)
 * C-c C-k <2>:                           Editing Rebase Sequences.
                                                               (line  11)
 * C-c C-n:                               Log Buffer.          (line  26)
 * C-c C-o:                               Commit Pseudo Headers.
                                                               (line  28)
 * C-c C-p:                               Commit Pseudo Headers.
                                                               (line  31)
 * C-c C-r:                               Commit Pseudo Headers.
                                                               (line  19)
 * C-c C-s:                               Commit Pseudo Headers.
                                                               (line  22)
 * C-c C-t:                               Commands Available in Diffs.
                                                               (line  15)
 * C-c C-t <1>:                           Commit Pseudo Headers.
                                                               (line  25)
 * C-c C-w:                               Using the Revision Stack.
                                                               (line   7)
 * C-c f:                                 Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f , c:                             Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f , k:                             Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f , r:                             Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f , x:                             Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f B:                               Blaming.             (line  28)
 * C-c f b:                               Blaming.             (line  28)
 * C-c f B <1>:                           Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f b <1>:                           Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f B b:                             Blaming.             (line  28)
 * C-c f B e:                             Blaming.             (line  28)
 * C-c f B f:                             Blaming.             (line  28)
 * C-c f B q:                             Blaming.             (line  28)
 * C-c f B r:                             Blaming.             (line  28)
 * C-c f c:                               Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f D:                               Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f d:                               Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f e:                               Blaming.             (line  28)
 * C-c f e <1>:                           Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f f:                               Blaming.             (line  28)
 * C-c f f <1>:                           Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f g:                               Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f G:                               Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f L:                               Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f l:                               Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f M:                               Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f m:                               Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f n:                               Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f p:                               Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f q:                               Blaming.             (line  28)
 * C-c f q <1>:                           Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f r:                               Blaming.             (line  28)
 * C-c f r <1>:                           Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f s:                               Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f s <1>:                           Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f t:                               Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f u:                               Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f u <1>:                           Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f v:                               Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c f V:                               Commands for Buffers Visiting Files.
                                                               (line  52)
 * C-c g:                                 Transient Commands.  (line  20)
 * C-c M-g:                               Commands for Buffers Visiting Files.
                                                               (line  58)
 * C-c M-g , c:                           Commands for Buffers Visiting Files.
                                                               (line  86)
 * C-c M-g , k:                           Commands for Buffers Visiting Files.
                                                               (line  82)
 * C-c M-g , r:                           Commands for Buffers Visiting Files.
                                                               (line  78)
 * C-c M-g , x:                           Commands for Buffers Visiting Files.
                                                               (line  74)
 * C-c M-g B:                             Blaming.             (line  34)
 * C-c M-g b:                             Blaming.             (line  45)
 * C-c M-g B <1>:                         Commands for Buffers Visiting Files.
                                                               (line 137)
 * C-c M-g B b:                           Blaming.             (line  45)
 * C-c M-g B e:                           Blaming.             (line  76)
 * C-c M-g B f:                           Blaming.             (line  68)
 * C-c M-g B q:                           Blaming.             (line  87)
 * C-c M-g B r:                           Blaming.             (line  60)
 * C-c M-g c:                             Commands for Buffers Visiting Files.
                                                               (line 176)
 * C-c M-g D:                             Commands for Buffers Visiting Files.
                                                               (line  91)
 * C-c M-g d:                             Commands for Buffers Visiting Files.
                                                               (line 101)
 * C-c M-g e:                             Blaming.             (line  76)
 * C-c M-g e <1>:                         Commands for Buffers Visiting Files.
                                                               (line 182)
 * C-c M-g f:                             Blaming.             (line  68)
 * C-c M-g g:                             Commands for Buffers Visiting Files.
                                                               (line 166)
 * C-c M-g G:                             Commands for Buffers Visiting Files.
                                                               (line 172)
 * C-c M-g L:                             Commands for Buffers Visiting Files.
                                                               (line 109)
 * C-c M-g l:                             Commands for Buffers Visiting Files.
                                                               (line 119)
 * C-c M-g M:                             Commands for Buffers Visiting Files.
                                                               (line 132)
 * C-c M-g n:                             Commands for Buffers Visiting Files.
                                                               (line 153)
 * C-c M-g p:                             Commands for Buffers Visiting Files.
                                                               (line 149)
 * C-c M-g q:                             Blaming.             (line  87)
 * C-c M-g r:                             Blaming.             (line  60)
 * C-c M-g s:                             Commands for Buffers Visiting Files.
                                                               (line  63)
 * C-c M-g s <1>:                         Commands for Buffers Visiting Files.
                                                               (line  63)
 * C-c M-g t:                             Commands for Buffers Visiting Files.
                                                               (line 129)
 * C-c M-g u:                             Commands for Buffers Visiting Files.
                                                               (line  69)
 * C-c M-g u <1>:                         Commands for Buffers Visiting Files.
                                                               (line  69)
 * C-c M-g v:                             Commands for Buffers Visiting Files.
                                                               (line 156)
 * C-c M-g V:                             Commands for Buffers Visiting Files.
                                                               (line 160)
 * C-c M-i:                               Commit Pseudo Headers.
                                                               (line  35)
 * C-c M-s:                               Editing Commit Messages.
                                                               (line  33)
 * C-c TAB:                               Section Visibility.  (line  14)
 * C-w:                                   Common Commands.     (line  22)
 * C-x g:                                 Status Buffer.       (line  23)
 * C-x M-g:                               Transient Commands.  (line  20)
 * C-x u:                                 Editing Rebase Sequences.
                                                               (line  77)
 * d:                                     Diffing.             (line  22)
 * D:                                     Refreshing Diffs.    (line  16)
 * d c:                                   Diffing.             (line  63)
 * d d:                                   Diffing.             (line  27)
 * D f:                                   Refreshing Diffs.    (line  45)
 * D F:                                   Refreshing Diffs.    (line  49)
 * D g:                                   Refreshing Diffs.    (line  21)
 * d p:                                   Diffing.             (line  56)
 * d r:                                   Diffing.             (line  30)
 * D r:                                   Refreshing Diffs.    (line  41)
 * d s:                                   Diffing.             (line  48)
 * D s:                                   Refreshing Diffs.    (line  25)
 * d t:                                   Diffing.             (line  67)
 * D t:                                   Refreshing Diffs.    (line  38)
 * d u:                                   Diffing.             (line  53)
 * d w:                                   Diffing.             (line  43)
 * D w:                                   Refreshing Diffs.    (line  31)
 * DEL:                                   Log Buffer.          (line  50)
 * DEL <1>:                               Commands Available in Diffs.
                                                               (line  56)
 * DEL <2>:                               Blaming.             (line 103)
 * DEL <3>:                               Editing Rebase Sequences.
                                                               (line  25)
 * e:                                     Ediffing.            (line  10)
 * E:                                     Ediffing.            (line  21)
 * e <1>:                                 Editing Rebase Sequences.
                                                               (line  46)
 * E c:                                   Ediffing.            (line 100)
 * E i:                                   Ediffing.            (line  94)
 * E m:                                   Ediffing.            (line  33)
 * E m <1>:                               Ediffing.            (line  48)
 * E r:                                   Ediffing.            (line  25)
 * E s:                                   Ediffing.            (line  87)
 * E t:                                   Ediffing.            (line  79)
 * E u:                                   Ediffing.            (line  91)
 * E w:                                   Ediffing.            (line  97)
 * E z:                                   Ediffing.            (line 103)
 * f:                                     Repository List.     (line 111)
 * f <1>:                                 Editing Rebase Sequences.
                                                               (line  52)
 * f <2>:                                 Fetching.            (line  10)
 * F:                                     Pulling.             (line  10)
 * f a:                                   Fetching.            (line  45)
 * f C:                                   Branch Commands.     (line  31)
 * F C:                                   Branch Commands.     (line  31)
 * f e:                                   Fetching.            (line  34)
 * F e:                                   Pulling.             (line  28)
 * f m:                                   Fetching.            (line  48)
 * f o:                                   Fetching.            (line  37)
 * f p:                                   Fetching.            (line  15)
 * F p:                                   Pulling.             (line  14)
 * f r:                                   Fetching.            (line  41)
 * f u:                                   Fetching.            (line  22)
 * F u:                                   Pulling.             (line  21)
 * g:                                     Automatic Refreshing of Magit Buffers.
                                                               (line  26)
 * G:                                     Automatic Refreshing of Magit Buffers.
                                                               (line  34)
 * H:                                     Section Types and Values.
                                                               (line  14)
 * I:                                     Creating Repository. (line   7)
 * j:                                     Log Buffer.          (line  31)
 * j <1>:                                 Commands Available in Diffs.
                                                               (line  43)
 * k:                                     Viewing Git Output.  (line  24)
 * k <1>:                                 Applying.            (line  40)
 * k <2>:                                 Editing Rebase Sequences.
                                                               (line  56)
 * k <3>:                                 Stashing.            (line 118)
 * l:                                     Logging.             (line  30)
 * L:                                     Refreshing Logs.     (line  12)
 * L <1>:                                 Log Buffer.          (line   7)
 * L <2>:                                 Log Margin.          (line  52)
 * l <1>:                                 Editing Rebase Sequences.
                                                               (line  94)
 * l a:                                   Logging.             (line  61)
 * l b:                                   Logging.             (line  58)
 * L d:                                   Log Margin.          (line  66)
 * L g:                                   Refreshing Logs.     (line  17)
 * l h:                                   Logging.             (line  40)
 * l H:                                   Reflog.              (line  18)
 * l l:                                   Logging.             (line  35)
 * l L:                                   Logging.             (line  55)
 * L L:                                   Refreshing Logs.     (line  34)
 * L L <1>:                               Log Margin.          (line  60)
 * L l:                                   Log Margin.          (line  63)
 * l o:                                   Logging.             (line  49)
 * l O:                                   Reflog.              (line  15)
 * l r:                                   Reflog.              (line  12)
 * L s:                                   Refreshing Logs.     (line  21)
 * l u:                                   Logging.             (line  43)
 * L w:                                   Refreshing Logs.     (line  27)
 * m:                                     Repository List.     (line 105)
 * m <1>:                                 Merging.             (line  10)
 * M:                                     Remote Commands.     (line  14)
 * m a:                                   Merging.             (line  42)
 * m a <1>:                               Merging.             (line  91)
 * M a:                                   Remote Commands.     (line  48)
 * M C:                                   Remote Commands.     (line  32)
 * m e:                                   Merging.             (line  30)
 * m i:                                   Merging.             (line  54)
 * M k:                                   Remote Commands.     (line  60)
 * m m:                                   Merging.             (line  18)
 * m m <1>:                               Merging.             (line  86)
 * m n:                                   Merging.             (line  36)
 * m p:                                   Merging.             (line  75)
 * M p:                                   Remote Commands.     (line  63)
 * M P:                                   Remote Commands.     (line  67)
 * M r:                                   Remote Commands.     (line  52)
 * m s:                                   Merging.             (line  67)
 * M u:                                   Remote Commands.     (line  56)
 * M-1:                                   Section Visibility.  (line  45)
 * M-2:                                   Section Visibility.  (line  45)
 * M-3:                                   Section Visibility.  (line  45)
 * M-4:                                   Section Visibility.  (line  45)
 * M-<tab>:                               Section Visibility.  (line  29)
 * M-n:                                   Section Movement.    (line  24)
 * M-n <1>:                               Editing Commit Messages.
                                                               (line  41)
 * M-n <2>:                               Editing Rebase Sequences.
                                                               (line  40)
 * M-p:                                   Section Movement.    (line  19)
 * M-p <1>:                               Editing Commit Messages.
                                                               (line  36)
 * M-p <2>:                               Editing Rebase Sequences.
                                                               (line  37)
 * M-w:                                   Blaming.             (line 134)
 * M-w <1>:                               Common Commands.     (line  39)
 * MM:                                    Editing Rebase Sequences.
                                                               (line 102)
 * Mt:                                    Editing Rebase Sequences.
                                                               (line 108)
 * n:                                     Section Movement.    (line  16)
 * n <1>:                                 Blaming.             (line 118)
 * N:                                     Blaming.             (line 121)
 * n <2>:                                 Editing Rebase Sequences.
                                                               (line  34)
 * n <3>:                                 Minor Mode for Buffers Visiting Blobs.
                                                               (line  16)
 * o:                                     Submodule Transient. (line   7)
 * O:                                     Subtree.             (line   9)
 * o a:                                   Submodule Transient. (line  20)
 * o d:                                   Submodule Transient. (line  45)
 * O e:                                   Subtree.             (line  37)
 * O e p:                                 Subtree.             (line  48)
 * O e s:                                 Subtree.             (line  52)
 * o f:                                   Submodule Transient. (line  51)
 * O i:                                   Subtree.             (line  13)
 * O i a:                                 Subtree.             (line  24)
 * O i c:                                 Subtree.             (line  28)
 * O i f:                                 Subtree.             (line  34)
 * O i m:                                 Subtree.             (line  31)
 * o l:                                   Submodule Transient. (line  48)
 * o p:                                   Submodule Transient. (line  32)
 * o r:                                   Submodule Transient. (line  26)
 * o s:                                   Submodule Transient. (line  40)
 * o u:                                   Submodule Transient. (line  36)
 * p:                                     Section Movement.    (line  11)
 * p <1>:                                 Blaming.             (line 124)
 * P:                                     Blaming.             (line 127)
 * p <2>:                                 Editing Rebase Sequences.
                                                               (line  31)
 * P <1>:                                 Pushing.             (line  10)
 * p <3>:                                 Minor Mode for Buffers Visiting Blobs.
                                                               (line  13)
 * P C:                                   Branch Commands.     (line  31)
 * P e:                                   Pushing.             (line  29)
 * P m:                                   Pushing.             (line  45)
 * P o:                                   Pushing.             (line  33)
 * P p:                                   Pushing.             (line  15)
 * P r:                                   Pushing.             (line  37)
 * P t:                                   Pushing.             (line  52)
 * P T:                                   Pushing.             (line  59)
 * P u:                                   Pushing.             (line  22)
 * q:                                     Quitting Windows.    (line   7)
 * q <1>:                                 Log Buffer.          (line  14)
 * q <2>:                                 Blaming.             (line 130)
 * q <3>:                                 Minor Mode for Buffers Visiting Blobs.
                                                               (line  19)
 * r:                                     Rebasing.            (line  10)
 * r <1>:                                 Editing Rebase Sequences.
                                                               (line  43)
 * r a:                                   Rebasing.            (line 111)
 * r e:                                   Rebasing.            (line  42)
 * r e <1>:                               Rebasing.            (line 107)
 * r f:                                   Rebasing.            (line  79)
 * r i:                                   Rebasing.            (line  76)
 * r k:                                   Rebasing.            (line  91)
 * r m:                                   Rebasing.            (line  83)
 * r p:                                   Rebasing.            (line  28)
 * r r:                                   Rebasing.            (line  97)
 * r s:                                   Rebasing.            (line  47)
 * r s <1>:                               Rebasing.            (line 103)
 * r u:                                   Rebasing.            (line  35)
 * r w:                                   Rebasing.            (line  87)
 * RET:                                   Repository List.     (line 102)
 * RET <1>:                               References Buffer.   (line 159)
 * RET <2>:                               Visiting Files and Blobs from a Diff.
                                                               (line   9)
 * RET <3>:                               Blaming.             (line  91)
 * RET <4>:                               Editing Rebase Sequences.
                                                               (line  15)
 * s:                                     Staging and Unstaging.
                                                               (line  29)
 * S:                                     Staging and Unstaging.
                                                               (line  36)
 * s <1>:                                 Editing Rebase Sequences.
                                                               (line  49)
 * S-<tab>:                               Section Visibility.  (line  33)
 * SPC:                                   Log Buffer.          (line  41)
 * SPC <1>:                               Commands Available in Diffs.
                                                               (line  53)
 * SPC <2>:                               Blaming.             (line  94)
 * SPC <3>:                               Editing Rebase Sequences.
                                                               (line  19)
 * t:                                     Editing Rebase Sequences.
                                                               (line  97)
 * t <1>:                                 Tagging.             (line   9)
 * T:                                     Notes.               (line   9)
 * T a:                                   Notes.               (line  47)
 * T c:                                   Notes.               (line  43)
 * t k:                                   Tagging.             (line  37)
 * T m:                                   Notes.               (line  35)
 * t p:                                   Tagging.             (line  43)
 * T p:                                   Notes.               (line  28)
 * t r:                                   Tagging.             (line  18)
 * T r:                                   Notes.               (line  21)
 * t t:                                   Tagging.             (line  14)
 * T T:                                   Notes.               (line  14)
 * TAB:                                   Section Visibility.  (line  10)
 * u:                                     Repository List.     (line 108)
 * u <1>:                                 Staging and Unstaging.
                                                               (line  42)
 * U:                                     Staging and Unstaging.
                                                               (line  50)
 * v:                                     Applying.            (line  47)
 * V:                                     Reverting.           (line   7)
 * V a:                                   Reverting.           (line  35)
 * V s:                                   Reverting.           (line  32)
 * V V:                                   Reverting.           (line  15)
 * V v:                                   Reverting.           (line  20)
 * V V <1>:                               Reverting.           (line  29)
 * W:                                     Plain Patches.       (line   7)
 * w:                                     Maildir Patches.     (line   9)
 * w a:                                   Plain Patches.       (line  20)
 * w a <1>:                               Maildir Patches.     (line  23)
 * w a <2>:                               Maildir Patches.     (line  38)
 * W c:                                   Plain Patches.       (line  12)
 * w m:                                   Maildir Patches.     (line  20)
 * W s:                                   Plain Patches.       (line  26)
 * w s:                                   Maildir Patches.     (line  34)
 * w w:                                   Maildir Patches.     (line  14)
 * w w <1>:                               Maildir Patches.     (line  31)
 * x:                                     Editing Rebase Sequences.
                                                               (line  62)
 * x <1>:                                 Resetting.           (line   9)
 * X f:                                   Resetting.           (line  44)
 * X h:                                   Resetting.           (line  24)
 * X i:                                   Resetting.           (line  33)
 * X k:                                   Resetting.           (line  28)
 * X m:                                   Resetting.           (line  15)
 * X s:                                   Resetting.           (line  19)
 * X w:                                   Resetting.           (line  39)
 * X w <1>:                               Wip Modes.           (line  64)
 * Y:                                     Cherries.            (line  18)
 * y:                                     References Buffer.   (line   7)
 * y <1>:                                 Editing Rebase Sequences.
                                                               (line  74)
 * y c:                                   References Buffer.   (line  25)
 * y o:                                   References Buffer.   (line  30)
 * y r:                                   References Buffer.   (line  34)
 * y y:                                   References Buffer.   (line  21)
 * z:                                     Stashing.            (line   9)
 * Z:                                     Worktree.            (line   9)
 * z a:                                   Stashing.            (line  52)
 * z b:                                   Stashing.            (line 105)
 * z B:                                   Stashing.            (line 110)
 * Z b:                                   Worktree.            (line  13)
 * Z c:                                   Worktree.            (line  16)
 * z f:                                   Stashing.            (line 115)
 * Z g:                                   Worktree.            (line  26)
 * z i:                                   Stashing.            (line  20)
 * z I:                                   Stashing.            (line  42)
 * z k:                                   Stashing.            (line  98)
 * Z k:                                   Worktree.            (line  22)
 * z l:                                   Stashing.            (line 121)
 * Z m:                                   Worktree.            (line  19)
 * z p:                                   Stashing.            (line  74)
 * z v:                                   Stashing.            (line 102)
 * z w:                                   Stashing.            (line  24)
 * z W:                                   Stashing.            (line  46)
 * z x:                                   Stashing.            (line  30)
 * z z:                                   Stashing.            (line  14)
 * z Z:                                   Stashing.            (line  36)
 
 
 File: magit.info,  Node: Function and Command Index,  Next: Variable Index,  Prev: Keystroke Index,  Up: Top
 
 Appendix D Function and Command Index
 *************************************
 
 
 * Menu:
 
 * bug-reference-mode:                    Commit Mode and Hooks.
                                                               (line  48)
 * forward-line:                          Editing Rebase Sequences.
                                                               (line  34)
 * git-commit-ack:                        Commit Pseudo Headers.
                                                               (line  16)
 * git-commit-cc:                         Commit Pseudo Headers.
                                                               (line  28)
 * git-commit-check-style-conventions:    Commit Message Conventions.
                                                               (line  33)
 * git-commit-insert-pseudo-header:       Commit Pseudo Headers.
                                                               (line  13)
 * git-commit-next-message:               Editing Commit Messages.
                                                               (line  41)
 * git-commit-prev-message:               Editing Commit Messages.
                                                               (line  36)
 * git-commit-propertize-diff:            Commit Mode and Hooks.
                                                               (line  40)
 * git-commit-reported:                   Commit Pseudo Headers.
                                                               (line  31)
 * git-commit-review:                     Commit Pseudo Headers.
                                                               (line  19)
 * git-commit-save-message:               Editing Commit Messages.
                                                               (line  33)
 * git-commit-save-message <1>:           Commit Mode and Hooks.
                                                               (line  26)
 * git-commit-setup-changelog-support:    Commit Mode and Hooks.
                                                               (line  29)
 * git-commit-signoff:                    Commit Pseudo Headers.
                                                               (line  22)
 * git-commit-suggested:                  Commit Pseudo Headers.
                                                               (line  35)
 * git-commit-test:                       Commit Pseudo Headers.
                                                               (line  25)
 * git-commit-turn-on-auto-fill:          Commit Mode and Hooks.
                                                               (line  33)
 * git-commit-turn-on-flyspell:           Commit Mode and Hooks.
                                                               (line  36)
 * git-rebase-backward-line:              Editing Rebase Sequences.
                                                               (line  31)
 * git-rebase-break:                      Editing Rebase Sequences.
                                                               (line  70)
 * git-rebase-edit:                       Editing Rebase Sequences.
                                                               (line  46)
 * git-rebase-exec:                       Editing Rebase Sequences.
                                                               (line  62)
 * git-rebase-fixup:                      Editing Rebase Sequences.
                                                               (line  52)
 * git-rebase-insert:                     Editing Rebase Sequences.
                                                               (line  74)
 * git-rebase-kill-line:                  Editing Rebase Sequences.
                                                               (line  56)
 * git-rebase-label:                      Editing Rebase Sequences.
                                                               (line  94)
 * git-rebase-merge:                      Editing Rebase Sequences.
                                                               (line 102)
 * git-rebase-merge-toggle-editmsg:       Editing Rebase Sequences.
                                                               (line 108)
 * git-rebase-move-line-down:             Editing Rebase Sequences.
                                                               (line  40)
 * git-rebase-move-line-up:               Editing Rebase Sequences.
                                                               (line  37)
 * git-rebase-pick:                       Editing Rebase Sequences.
                                                               (line  59)
 * git-rebase-reset:                      Editing Rebase Sequences.
                                                               (line  97)
 * git-rebase-reword:                     Editing Rebase Sequences.
                                                               (line  43)
 * git-rebase-show-commit:                Editing Rebase Sequences.
                                                               (line  15)
 * git-rebase-show-or-scroll-down:        Editing Rebase Sequences.
                                                               (line  25)
 * git-rebase-show-or-scroll-up:          Editing Rebase Sequences.
                                                               (line  19)
 * git-rebase-squash:                     Editing Rebase Sequences.
                                                               (line  49)
 * git-rebase-undo:                       Editing Rebase Sequences.
                                                               (line  77)
 * ido-enter-magit-status:                Status Buffer.       (line  96)
 * magit-add-section-hook:                Section Hooks.       (line  20)
 * magit-after-save-refresh-status:       Automatic Refreshing of Magit Buffers.
                                                               (line  55)
 * magit-am:                              Maildir Patches.     (line   9)
 * magit-am-abort:                        Maildir Patches.     (line  38)
 * magit-am-apply-maildir:                Maildir Patches.     (line  20)
 * magit-am-apply-patches:                Maildir Patches.     (line  14)
 * magit-am-continue:                     Maildir Patches.     (line  31)
 * magit-am-skip:                         Maildir Patches.     (line  34)
 * magit-apply:                           Applying.            (line  34)
 * magit-bisect:                          Bisecting.           (line   9)
 * magit-bisect-bad:                      Bisecting.           (line  32)
 * magit-bisect-good:                     Bisecting.           (line  36)
 * magit-bisect-mark:                     Bisecting.           (line  40)
 * magit-bisect-reset:                    Bisecting.           (line  51)
 * magit-bisect-run:                      Bisecting.           (line  26)
 * magit-bisect-skip:                     Bisecting.           (line  46)
 * magit-bisect-start:                    Bisecting.           (line  16)
 * magit-blame:                           Blaming.             (line  28)
 * magit-blame <1>:                       Blaming.             (line  34)
 * magit-blame <2>:                       Blaming.             (line 115)
 * magit-blame <3>:                       Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-blame <4>:                       Commands for Buffers Visiting Files.
                                                               (line 137)
 * magit-blame-addition:                  Blaming.             (line  28)
 * magit-blame-addition <1>:              Blaming.             (line  45)
 * magit-blame-additions:                 Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-blame-copy-hash:                 Blaming.             (line 134)
 * magit-blame-cycle-style:               Blaming.             (line 141)
 * magit-blame-echo:                      Blaming.             (line  28)
 * magit-blame-echo <1>:                  Blaming.             (line  76)
 * magit-blame-echo <2>:                  Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-blame-next-chunk:                Blaming.             (line 118)
 * magit-blame-next-chunk-same-commit:    Blaming.             (line 121)
 * magit-blame-previous-chunk:            Blaming.             (line 124)
 * magit-blame-previous-chunk-same-commit: Blaming.            (line 127)
 * magit-blame-quit:                      Blaming.             (line  28)
 * magit-blame-quit <1>:                  Blaming.             (line  87)
 * magit-blame-quit <2>:                  Blaming.             (line 130)
 * magit-blame-quit <3>:                  Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-blame-removal:                   Blaming.             (line  28)
 * magit-blame-removal <1>:               Blaming.             (line  60)
 * magit-blame-removal <2>:               Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-blame-reverse:                   Blaming.             (line  28)
 * magit-blame-reverse <1>:               Blaming.             (line  68)
 * magit-blame-reverse <2>:               Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-blob-next:                       Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-blob-next <1>:                   Commands for Buffers Visiting Files.
                                                               (line 153)
 * magit-blob-next <2>:                   Minor Mode for Buffers Visiting Blobs.
                                                               (line  16)
 * magit-blob-previous:                   Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-blob-previous <1>:               Commands for Buffers Visiting Files.
                                                               (line 149)
 * magit-blob-previous <2>:               Minor Mode for Buffers Visiting Blobs.
                                                               (line  13)
 * magit-blob-visit-file:                 Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-blob-visit-file <1>:             Commands for Buffers Visiting Files.
                                                               (line 160)
 * magit-branch:                          Branch Commands.     (line  13)
 * magit-branch-and-checkout:             Branch Commands.     (line  63)
 * magit-branch-checkout:                 Branch Commands.     (line  69)
 * magit-branch-configure:                Branch Commands.     (line  31)
 * magit-branch-create:                   Branch Commands.     (line  54)
 * magit-branch-delete:                   Branch Commands.     (line 138)
 * magit-branch-or-checkout:              Branch Commands.     (line 257)
 * magit-branch-orphan:                   Branch Commands.     (line 253)
 * magit-branch-rename:                   Branch Commands.     (line 149)
 * magit-branch-reset:                    Branch Commands.     (line 123)
 * magit-branch-shelve:                   Auxiliary Branch Commands.
                                                               (line   9)
 * magit-branch-spinoff:                  Branch Commands.     (line  91)
 * magit-branch-spinout:                  Branch Commands.     (line 118)
 * magit-branch-unshelve:                 Auxiliary Branch Commands.
                                                               (line  19)
 * magit-builtin-completing-read:         Support for Completion Frameworks.
                                                               (line  41)
 * magit-bundle:                          Bundle.              (line   8)
 * magit-call-git:                        Calling Git for Effect.
                                                               (line  28)
 * magit-call-process:                    Calling Git for Effect.
                                                               (line  31)
 * magit-cancel-section:                  Creating Sections.   (line  69)
 * magit-checkout:                        Branch Commands.     (line  47)
 * magit-cherry:                          Cherries.            (line  18)
 * magit-cherry-apply:                    Cherry Picking.      (line  23)
 * magit-cherry-copy:                     Cherry Picking.      (line  17)
 * magit-cherry-donate:                   Cherry Picking.      (line  51)
 * magit-cherry-harvest:                  Cherry Picking.      (line  40)
 * magit-cherry-pick:                     Cherry Picking.      (line   9)
 * magit-cherry-spinoff:                  Cherry Picking.      (line  72)
 * magit-cherry-spinout:                  Cherry Picking.      (line  62)
 * magit-clone:                           Cloning Repository.  (line  20)
 * magit-clone-bare:                      Cloning Repository.  (line  44)
 * magit-clone-mirror:                    Cloning Repository.  (line  48)
 * magit-clone-regular:                   Cloning Repository.  (line  28)
 * magit-clone-shallow:                   Cloning Repository.  (line  32)
 * magit-clone-shallow-exclude:           Cloning Repository.  (line  61)
 * magit-clone-shallow-since:             Cloning Repository.  (line  55)
 * magit-clone-sparse:                    Cloning Repository.  (line  38)
 * magit-commit:                          Initiating a Commit. (line   9)
 * magit-commit <1>:                      Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-commit <2>:                      Commands for Buffers Visiting Files.
                                                               (line 176)
 * magit-commit-amend:                    Initiating a Commit. (line  18)
 * magit-commit-augment:                  Initiating a Commit. (line  59)
 * magit-commit-create:                   Initiating a Commit. (line  14)
 * magit-commit-extend:                   Initiating a Commit. (line  21)
 * magit-commit-fixup:                    Initiating a Commit. (line  39)
 * magit-commit-instant-fixup:            Initiating a Commit. (line  46)
 * magit-commit-instant-squash:           Initiating a Commit. (line  56)
 * magit-commit-reword:                   Initiating a Commit. (line  30)
 * magit-commit-squash:                   Initiating a Commit. (line  49)
 * magit-completing-read:                 Support for Completion Frameworks.
                                                               (line  57)
 * magit-copy-buffer-revision:            Common Commands.     (line  39)
 * magit-copy-section-value:              Common Commands.     (line  22)
 * magit-current-section:                 Section Selection.   (line   6)
 * magit-cycle-margin-style:              Log Margin.          (line  63)
 * magit-debug-git-executable:            Git Executable.      (line  55)
 * magit-debug-git-executable <1>:        Debugging Tools.     (line  57)
 * magit-define-section-jumper:           Creating Sections.   (line  74)
 * magit-describe-section:                Section Types and Values.
                                                               (line  14)
 * magit-describe-section-briefly:        Section Types and Values.
                                                               (line  17)
 * magit-describe-section-briefly <1>:    Matching Sections.   (line   7)
 * magit-diff:                            Diffing.             (line  22)
 * magit-diff <1>:                        Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-diff <2>:                        Commands for Buffers Visiting Files.
                                                               (line  91)
 * magit-diff-buffer-file:                Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-diff-buffer-file <1>:            Commands for Buffers Visiting Files.
                                                               (line 101)
 * magit-diff-default-context:            Refreshing Diffs.    (line  68)
 * magit-diff-dwim:                       Diffing.             (line  27)
 * magit-diff-edit-hunk-commit:           Commands Available in Diffs.
                                                               (line  24)
 * magit-diff-flip-revs:                  Refreshing Diffs.    (line  45)
 * magit-diff-less-context:               Refreshing Diffs.    (line  62)
 * magit-diff-more-context:               Refreshing Diffs.    (line  65)
 * magit-diff-paths:                      Diffing.             (line  56)
 * magit-diff-range:                      Diffing.             (line  30)
 * magit-diff-refresh:                    Refreshing Diffs.    (line  16)
 * magit-diff-refresh <1>:                Refreshing Diffs.    (line  21)
 * magit-diff-save-default-arguments:     Refreshing Diffs.    (line  31)
 * magit-diff-scope:                      Matching Sections.   (line 110)
 * magit-diff-set-default-arguments:      Refreshing Diffs.    (line  25)
 * magit-diff-show-or-scroll-down:        Log Buffer.          (line  50)
 * magit-diff-show-or-scroll-down <1>:    Blaming.             (line 103)
 * magit-diff-show-or-scroll-up:          Log Buffer.          (line  41)
 * magit-diff-show-or-scroll-up <1>:      Blaming.             (line  94)
 * magit-diff-staged:                     Diffing.             (line  48)
 * magit-diff-switch-range-type:          Refreshing Diffs.    (line  41)
 * magit-diff-toggle-file-filter:         Refreshing Diffs.    (line  49)
 * magit-diff-toggle-refine-hunk:         Refreshing Diffs.    (line  38)
 * magit-diff-trace-definition:           Commands Available in Diffs.
                                                               (line  15)
 * magit-diff-type:                       Matching Sections.   (line  88)
 * magit-diff-unstaged:                   Diffing.             (line  53)
 * magit-diff-visit-file:                 Visiting Files and Blobs from a Diff.
                                                               (line   9)
 * magit-diff-visit-file-other-frame:     Visiting Files and Blobs from a Diff.
                                                               (line  71)
 * magit-diff-visit-file-other-window:    Visiting Files and Blobs from a Diff.
                                                               (line  70)
 * magit-diff-visit-file-worktree:        Visiting Files and Blobs from a Diff.
                                                               (line  50)
 * magit-diff-visit-worktree-file-other-frame: Visiting Files and Blobs from a Diff.
                                                               (line  73)
 * magit-diff-visit-worktree-file-other-window: Visiting Files and Blobs from a Diff.
                                                               (line  72)
 * magit-diff-while-committing:           Refreshing Diffs.    (line  75)
 * magit-diff-while-committing <1>:       Editing Commit Messages.
                                                               (line  54)
 * magit-diff-working-tree:               Diffing.             (line  43)
 * magit-disable-section-inserter:        Per-Repository Configuration.
                                                               (line  31)
 * magit-discard:                         Applying.            (line  40)
 * magit-dispatch:                        Transient Commands.  (line  20)
 * magit-display-buffer:                  Switching Buffers.   (line   6)
 * magit-display-buffer-fullcolumn-most-v1: Switching Buffers. (line  68)
 * magit-display-buffer-fullframe-status-topleft-v1: Switching Buffers.
                                                               (line  59)
 * magit-display-buffer-fullframe-status-v1: Switching Buffers.
                                                               (line  54)
 * magit-display-buffer-same-window-except-diff-v1: Switching Buffers.
                                                               (line  49)
 * magit-display-buffer-traditional:      Switching Buffers.   (line  42)
 * magit-display-repository-buffer:       Common Commands.     (line   9)
 * magit-display-repository-buffer <1>:   Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-display-repository-buffer <2>:   Commands for Buffers Visiting Files.
                                                               (line 172)
 * magit-ediff:                           Ediffing.            (line  21)
 * magit-ediff-compare:                   Ediffing.            (line  25)
 * magit-ediff-dwim:                      Ediffing.            (line  10)
 * magit-ediff-resolve-all:               Ediffing.            (line  48)
 * magit-ediff-resolve-rest:              Ediffing.            (line  33)
 * magit-ediff-show-commit:               Ediffing.            (line 100)
 * magit-ediff-show-staged:               Ediffing.            (line  94)
 * magit-ediff-show-stash:                Ediffing.            (line 103)
 * magit-ediff-show-unstaged:             Ediffing.            (line  91)
 * magit-ediff-show-working-tree:         Ediffing.            (line  97)
 * magit-ediff-stage:                     Ediffing.            (line  87)
 * magit-edit-line-commit:                Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-edit-line-commit <1>:            Commands for Buffers Visiting Files.
                                                               (line 182)
 * magit-emacs-Q-command:                 Debugging Tools.     (line  16)
 * magit-fetch:                           Fetching.            (line  10)
 * magit-fetch-all:                       Fetching.            (line  45)
 * magit-fetch-branch:                    Fetching.            (line  37)
 * magit-fetch-from-pushremote:           Fetching.            (line  15)
 * magit-fetch-from-upstream:             Fetching.            (line  22)
 * magit-fetch-modules:                   Submodule Transient. (line  51)
 * magit-fetch-other:                     Fetching.            (line  34)
 * magit-fetch-refspec:                   Fetching.            (line  41)
 * magit-file-checkout:                   Resetting.           (line  44)
 * magit-file-checkout <1>:               Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-file-checkout <2>:               Commands for Buffers Visiting Files.
                                                               (line  86)
 * magit-file-delete:                     Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-file-delete <1>:                 Commands for Buffers Visiting Files.
                                                               (line  82)
 * magit-file-dispatch:                   Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-file-dispatch <1>:               Commands for Buffers Visiting Files.
                                                               (line  58)
 * magit-file-rename:                     Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-file-rename <1>:                 Commands for Buffers Visiting Files.
                                                               (line  78)
 * magit-file-untrack:                    Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-file-untrack <1>:                Commands for Buffers Visiting Files.
                                                               (line  74)
 * magit-find-file:                       General-Purpose Visit Commands.
                                                               (line   9)
 * magit-find-file <1>:                   Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-find-file <2>:                   Commands for Buffers Visiting Files.
                                                               (line 156)
 * magit-find-file-other-frame:           General-Purpose Visit Commands.
                                                               (line  19)
 * magit-find-file-other-window:          General-Purpose Visit Commands.
                                                               (line  14)
 * magit-generate-buffer-name-default-function: Naming Buffers.
                                                               (line  16)
 * magit-get-section:                     Matching Sections.   (line  14)
 * magit-git:                             Calling Git for Effect.
                                                               (line  46)
 * magit-git-command:                     Running Git Manually.
                                                               (line  25)
 * magit-git-command-topdir:              Running Git Manually.
                                                               (line  17)
 * magit-git-exit-code:                   Getting a Value from Git.
                                                               (line  10)
 * magit-git-failure:                     Getting a Value from Git.
                                                               (line  17)
 * magit-git-false:                       Getting a Value from Git.
                                                               (line  25)
 * magit-git-insert:                      Getting a Value from Git.
                                                               (line  29)
 * magit-git-items:                       Getting a Value from Git.
                                                               (line  41)
 * magit-git-lines:                       Getting a Value from Git.
                                                               (line  37)
 * magit-git-mergetool:                   Running Git Manually.
                                                               (line  62)
 * magit-git-mergetool <1>:               Ediffing.            (line  79)
 * magit-git-str:                         Getting a Value from Git.
                                                               (line  75)
 * magit-git-string:                      Getting a Value from Git.
                                                               (line  32)
 * magit-git-success:                     Getting a Value from Git.
                                                               (line  13)
 * magit-git-true:                        Getting a Value from Git.
                                                               (line  21)
 * magit-git-wash:                        Calling Git for Effect.
                                                               (line  50)
 * magit-go-backward:                     Log Buffer.          (line  20)
 * magit-go-backward <1>:                 Refreshing Diffs.    (line  84)
 * magit-go-forward:                      Log Buffer.          (line  23)
 * magit-go-forward <1>:                  Refreshing Diffs.    (line  87)
 * magit-hunk-set-window-start:           Section Movement.    (line  45)
 * magit-ido-completing-read:             Support for Completion Frameworks.
                                                               (line  46)
 * magit-init:                            Creating Repository. (line   7)
 * magit-insert-am-sequence:              Status Sections.     (line  25)
 * magit-insert-assumed-unchanged-files:  Status Sections.     (line  98)
 * magit-insert-bisect-log:               Status Sections.     (line  39)
 * magit-insert-bisect-output:            Status Sections.     (line  33)
 * magit-insert-bisect-rest:              Status Sections.     (line  36)
 * magit-insert-diff-filter-header:       Status Header Sections.
                                                               (line  35)
 * magit-insert-error-header:             Status Header Sections.
                                                               (line  26)
 * magit-insert-head-branch-header:       Status Header Sections.
                                                               (line  38)
 * magit-insert-heading:                  Creating Sections.   (line  41)
 * magit-insert-ignored-files:            Status Sections.     (line  83)
 * magit-insert-local-branches:           References Sections. (line  16)
 * magit-insert-merge-log:                Status Sections.     (line  17)
 * magit-insert-modules:                  Status Module Sections.
                                                               (line  12)
 * magit-insert-modules-overview:         Status Module Sections.
                                                               (line  30)
 * magit-insert-modules-unpulled-from-pushremote: Status Module Sections.
                                                               (line  45)
 * magit-insert-modules-unpulled-from-upstream: Status Module Sections.
                                                               (line  40)
 * magit-insert-modules-unpushed-to-pushremote: Status Module Sections.
                                                               (line  55)
 * magit-insert-modules-unpushed-to-upstream: Status Module Sections.
                                                               (line  50)
 * magit-insert-push-branch-header:       Status Header Sections.
                                                               (line  45)
 * magit-insert-rebase-sequence:          Status Sections.     (line  21)
 * magit-insert-recent-commits:           Status Sections.     (line 110)
 * magit-insert-remote-branches:          References Sections. (line  19)
 * magit-insert-remote-header:            Status Header Sections.
                                                               (line  58)
 * magit-insert-repo-header:              Status Header Sections.
                                                               (line  55)
 * magit-insert-section:                  Creating Sections.   (line   6)
 * magit-insert-sequencer-sequence:       Status Sections.     (line  29)
 * magit-insert-skip-worktree-files:      Status Sections.     (line  92)
 * magit-insert-staged-changes:           Status Sections.     (line  53)
 * magit-insert-stashes:                  Status Sections.     (line  56)
 * magit-insert-status-headers:           Status Header Sections.
                                                               (line  12)
 * magit-insert-tags:                     References Sections. (line  22)
 * magit-insert-tags-header:              Status Header Sections.
                                                               (line  49)
 * magit-insert-tracked-files:            Status Sections.     (line  80)
 * magit-insert-unpulled-cherries:        Status Sections.     (line 119)
 * magit-insert-unpulled-from-pushremote: Status Sections.     (line  66)
 * magit-insert-unpulled-from-upstream:   Status Sections.     (line  62)
 * magit-insert-unpulled-or-recent-commits: Status Sections.   (line 104)
 * magit-insert-unpushed-cherries:        Status Sections.     (line 125)
 * magit-insert-unpushed-to-pushremote:   Status Sections.     (line  74)
 * magit-insert-unpushed-to-upstream:     Status Sections.     (line  70)
 * magit-insert-unstaged-changes:         Status Sections.     (line  50)
 * magit-insert-untracked-files:          Status Sections.     (line  42)
 * magit-insert-upstream-branch-header:   Status Header Sections.
                                                               (line  41)
 * magit-insert-user-header:              Status Header Sections.
                                                               (line  65)
 * magit-jump-to-diffstat-or-diff:        Commands Available in Diffs.
                                                               (line  43)
 * magit-kill-this-buffer:                Minor Mode for Buffers Visiting Blobs.
                                                               (line  19)
 * magit-list-repositories:               Repository List.     (line   6)
 * magit-list-submodules:                 Listing Submodules.  (line  13)
 * magit-list-submodules <1>:             Submodule Transient. (line  48)
 * magit-log:                             Logging.             (line  30)
 * magit-log <1>:                         Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-log <2>:                         Commands for Buffers Visiting Files.
                                                               (line 109)
 * magit-log-all:                         Logging.             (line  61)
 * magit-log-all-branches:                Logging.             (line  58)
 * magit-log-branches:                    Logging.             (line  55)
 * magit-log-buffer-file:                 Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-log-buffer-file <1>:             Commands for Buffers Visiting Files.
                                                               (line 119)
 * magit-log-bury-buffer:                 Log Buffer.          (line  14)
 * magit-log-current:                     Logging.             (line  35)
 * magit-log-double-commit-limit:         Log Buffer.          (line  64)
 * magit-log-half-commit-limit:           Log Buffer.          (line  67)
 * magit-log-head:                        Logging.             (line  40)
 * magit-log-maybe-show-more-commits:     Section Movement.    (line  58)
 * magit-log-maybe-update-blob-buffer:    Section Movement.    (line  72)
 * magit-log-maybe-update-revision-buffer: Section Movement.   (line  65)
 * magit-log-merged:                      Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-log-merged <1>:                  Commands for Buffers Visiting Files.
                                                               (line 132)
 * magit-log-move-to-parent:              Log Buffer.          (line  26)
 * magit-log-move-to-revision:            Log Buffer.          (line  31)
 * magit-log-other:                       Logging.             (line  49)
 * magit-log-refresh:                     Refreshing Logs.     (line  12)
 * magit-log-refresh <1>:                 Refreshing Logs.     (line  17)
 * magit-log-refresh <2>:                 Log Buffer.          (line   7)
 * magit-log-related:                     Logging.             (line  43)
 * magit-log-save-default-arguments:      Refreshing Logs.     (line  27)
 * magit-log-select-pick:                 Select from Log.     (line  21)
 * magit-log-select-quit:                 Select from Log.     (line  26)
 * magit-log-set-default-arguments:       Refreshing Logs.     (line  21)
 * magit-log-toggle-commit-limit:         Log Buffer.          (line  59)
 * magit-log-trace-definition:            Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-log-trace-definition <1>:        Commands for Buffers Visiting Files.
                                                               (line 129)
 * magit-margin-settings:                 Log Margin.          (line  52)
 * magit-maybe-set-dedicated:             Switching Buffers.   (line  89)
 * magit-merge:                           Merging.             (line  10)
 * magit-merge <1>:                       Merging.             (line  86)
 * magit-merge-abort:                     Merging.             (line  91)
 * magit-merge-absorb:                    Merging.             (line  42)
 * magit-merge-editmsg:                   Merging.             (line  30)
 * magit-merge-into:                      Merging.             (line  54)
 * magit-merge-nocommit:                  Merging.             (line  36)
 * magit-merge-plain:                     Merging.             (line  18)
 * magit-merge-preview:                   Merging.             (line  75)
 * magit-merge-squash:                    Merging.             (line  67)
 * magit-mode-bury-buffer:                Quitting Windows.    (line   7)
 * magit-mode-display-buffer:             Refreshing Buffers.  (line  32)
 * magit-mode-quit-window:                Quitting Windows.    (line  34)
 * magit-mode-setup:                      Refreshing Buffers.  (line  17)
 * magit-notes:                           Notes.               (line   9)
 * magit-notes-edit:                      Notes.               (line  14)
 * magit-notes-merge:                     Notes.               (line  35)
 * magit-notes-merge-abort:               Notes.               (line  47)
 * magit-notes-merge-commit:              Notes.               (line  43)
 * magit-notes-prune:                     Notes.               (line  28)
 * magit-notes-remove:                    Notes.               (line  21)
 * magit-patch:                           Plain Patches.       (line   7)
 * magit-patch-apply:                     Plain Patches.       (line  20)
 * magit-patch-apply <1>:                 Maildir Patches.     (line  23)
 * magit-patch-create:                    Plain Patches.       (line  12)
 * magit-patch-save:                      Plain Patches.       (line  26)
 * magit-pop-revision-stack:              Using the Revision Stack.
                                                               (line   7)
 * magit-process:                         Viewing Git Output.  (line  17)
 * magit-process-file:                    Getting a Value from Git.
                                                               (line  57)
 * magit-process-git:                     Getting a Value from Git.
                                                               (line  50)
 * magit-process-kill:                    Viewing Git Output.  (line  24)
 * magit-pull:                            Pulling.             (line  10)
 * magit-pull-branch:                     Pulling.             (line  28)
 * magit-pull-from-pushremote:            Pulling.             (line  14)
 * magit-pull-from-upstream:              Pulling.             (line  21)
 * magit-push:                            Pushing.             (line  10)
 * magit-push-current:                    Pushing.             (line  29)
 * magit-push-current-to-pushremote:      Pushing.             (line  15)
 * magit-push-current-to-upstream:        Pushing.             (line  22)
 * magit-push-implicitly:                 Pushing.             (line  74)
 * magit-push-matching:                   Pushing.             (line  45)
 * magit-push-other:                      Pushing.             (line  33)
 * magit-push-refspecs:                   Pushing.             (line  37)
 * magit-push-tag:                        Pushing.             (line  59)
 * magit-push-tags:                       Pushing.             (line  52)
 * magit-push-to-remote:                  Pushing.             (line  91)
 * magit-rebase:                          Rebasing.            (line  10)
 * magit-rebase-abort:                    Rebasing.            (line 111)
 * magit-rebase-autosquash:               Rebasing.            (line  79)
 * magit-rebase-branch:                   Rebasing.            (line  42)
 * magit-rebase-continue:                 Rebasing.            (line  97)
 * magit-rebase-edit:                     Rebasing.            (line 107)
 * magit-rebase-edit-commit:              Rebasing.            (line  83)
 * magit-rebase-interactive:              Rebasing.            (line  76)
 * magit-rebase-onto-pushremote:          Rebasing.            (line  28)
 * magit-rebase-onto-upstream:            Rebasing.            (line  35)
 * magit-rebase-remove-commit:            Rebasing.            (line  91)
 * magit-rebase-reword-commit:            Rebasing.            (line  87)
 * magit-rebase-skip:                     Rebasing.            (line 103)
 * magit-rebase-subset:                   Rebasing.            (line  47)
 * magit-reflog-current:                  Reflog.              (line  12)
 * magit-reflog-head:                     Reflog.              (line  18)
 * magit-reflog-other:                    Reflog.              (line  15)
 * magit-refresh:                         Automatic Refreshing of Magit Buffers.
                                                               (line  26)
 * magit-refresh-all:                     Automatic Refreshing of Magit Buffers.
                                                               (line  34)
 * magit-refs-set-show-commit-count:      References Buffer.   (line  34)
 * magit-region-sections:                 Section Selection.   (line   9)
 * magit-region-values:                   Section Selection.   (line  35)
 * magit-remote:                          Remote Commands.     (line  14)
 * magit-remote-add:                      Remote Commands.     (line  48)
 * magit-remote-configure:                Remote Commands.     (line  32)
 * magit-remote-prune:                    Remote Commands.     (line  63)
 * magit-remote-prune-refspecs:           Remote Commands.     (line  67)
 * magit-remote-remove:                   Remote Commands.     (line  60)
 * magit-remote-rename:                   Remote Commands.     (line  52)
 * magit-remote-set-url:                  Remote Commands.     (line  56)
 * magit-repolist-column-branch:          Repository List.     (line  51)
 * magit-repolist-column-branches:        Repository List.     (line  58)
 * magit-repolist-column-flag:            Repository List.     (line  64)
 * magit-repolist-column-flags:           Repository List.     (line  76)
 * magit-repolist-column-ident:           Repository List.     (line  40)
 * magit-repolist-column-path:            Repository List.     (line  44)
 * magit-repolist-column-stashes:         Repository List.     (line  61)
 * magit-repolist-column-unpulled-from-pushremote: Repository List.
                                                               (line  87)
 * magit-repolist-column-unpulled-from-upstream: Repository List.
                                                               (line  83)
 * magit-repolist-column-unpushed-to-pushremote: Repository List.
                                                               (line  95)
 * magit-repolist-column-unpushed-to-upstream: Repository List.
                                                               (line  91)
 * magit-repolist-column-upstream:        Repository List.     (line  54)
 * magit-repolist-column-version:         Repository List.     (line  47)
 * magit-repolist-fetch:                  Repository List.     (line 111)
 * magit-repolist-find-file-other-frame:  Repository List.     (line 115)
 * magit-repolist-mark:                   Repository List.     (line 105)
 * magit-repolist-status:                 Repository List.     (line 102)
 * magit-repolist-unmark:                 Repository List.     (line 108)
 * magit-reset-hard:                      Resetting.           (line  24)
 * magit-reset-index:                     Staging and Unstaging.
                                                               (line  78)
 * magit-reset-index <1>:                 Resetting.           (line  33)
 * magit-reset-keep:                      Resetting.           (line  28)
 * magit-reset-mixed:                     Resetting.           (line  15)
 * magit-reset-quickly:                   Resetting.           (line   9)
 * magit-reset-soft:                      Resetting.           (line  19)
 * magit-reset-worktree:                  Resetting.           (line  39)
 * magit-reset-worktree <1>:              Wip Modes.           (line  64)
 * magit-restore-window-configuration:    Quitting Windows.    (line  24)
 * magit-reverse:                         Applying.            (line  47)
 * magit-reverse-in-index:                Staging and Unstaging.
                                                               (line  58)
 * magit-revert:                          Reverting.           (line   7)
 * magit-revert-and-commit:               Reverting.           (line  15)
 * magit-revert-no-commit:                Reverting.           (line  20)
 * magit-run:                             Running Git Manually.
                                                               (line  13)
 * magit-run-git:                         Calling Git for Effect.
                                                               (line  34)
 * magit-run-git-async:                   Calling Git for Effect.
                                                               (line  59)
 * magit-run-git-gui:                     Running Git Manually.
                                                               (line  59)
 * magit-run-git-with-editor:             Calling Git for Effect.
                                                               (line  71)
 * magit-run-git-with-input:              Calling Git for Effect.
                                                               (line  37)
 * magit-run-gitk:                        Running Git Manually.
                                                               (line  50)
 * magit-run-gitk-all:                    Running Git Manually.
                                                               (line  53)
 * magit-run-gitk-branches:               Running Git Manually.
                                                               (line  56)
 * magit-save-window-configuration:       Switching Buffers.   (line  80)
 * magit-section-backward:                Section Movement.    (line  11)
 * magit-section-backward-siblings:       Section Movement.    (line  19)
 * magit-section-case:                    Matching Sections.   (line  66)
 * magit-section-cycle:                   Section Visibility.  (line  14)
 * magit-section-cycle-diffs:             Section Visibility.  (line  29)
 * magit-section-cycle-global:            Section Visibility.  (line  33)
 * magit-section-forward:                 Section Movement.    (line  16)
 * magit-section-forward-siblings:        Section Movement.    (line  24)
 * magit-section-hide:                    Section Visibility.  (line  55)
 * magit-section-hide-children:           Section Visibility.  (line  67)
 * magit-section-ident:                   Matching Sections.   (line  10)
 * magit-section-match:                   Matching Sections.   (line  18)
 * magit-section-set-window-start:        Section Movement.    (line  52)
 * magit-section-show:                    Section Visibility.  (line  52)
 * magit-section-show-children:           Section Visibility.  (line  62)
 * magit-section-show-headings:           Section Visibility.  (line  58)
 * magit-section-show-level-1:            Section Visibility.  (line  39)
 * magit-section-show-level-1-all:        Section Visibility.  (line  45)
 * magit-section-show-level-2:            Section Visibility.  (line  39)
 * magit-section-show-level-2-all:        Section Visibility.  (line  45)
 * magit-section-show-level-3:            Section Visibility.  (line  39)
 * magit-section-show-level-3-all:        Section Visibility.  (line  45)
 * magit-section-show-level-4:            Section Visibility.  (line  39)
 * magit-section-show-level-4-all:        Section Visibility.  (line  45)
 * magit-section-toggle:                  Section Visibility.  (line  10)
 * magit-section-toggle-children:         Section Visibility.  (line  70)
 * magit-section-up:                      Section Movement.    (line  28)
 * magit-section-value-if:                Matching Sections.   (line  57)
 * magit-sequence-abort:                  Cherry Picking.      (line  91)
 * magit-sequence-abort <1>:              Reverting.           (line  35)
 * magit-sequence-continue:               Cherry Picking.      (line  85)
 * magit-sequence-continue <1>:           Reverting.           (line  29)
 * magit-sequence-skip:                   Cherry Picking.      (line  88)
 * magit-sequence-skip <1>:               Reverting.           (line  32)
 * magit-shell-command:                   Running Git Manually.
                                                               (line  38)
 * magit-shell-command-topdir:            Running Git Manually.
                                                               (line  34)
 * magit-show-commit:                     Diffing.             (line  63)
 * magit-show-commit <1>:                 Blaming.             (line  91)
 * magit-show-refs:                       References Buffer.   (line   7)
 * magit-show-refs-current:               References Buffer.   (line  25)
 * magit-show-refs-head:                  References Buffer.   (line  21)
 * magit-show-refs-other:                 References Buffer.   (line  30)
 * magit-snapshot-both:                   Stashing.            (line  36)
 * magit-snapshot-index:                  Stashing.            (line  42)
 * magit-snapshot-worktree:               Stashing.            (line  46)
 * magit-sparse-checkout:                 Sparse checkouts.    (line  17)
 * magit-sparse-checkout-add:             Sparse checkouts.    (line  39)
 * magit-sparse-checkout-disable:         Sparse checkouts.    (line  50)
 * magit-sparse-checkout-enable:          Sparse checkouts.    (line  21)
 * magit-sparse-checkout-reapply:         Sparse checkouts.    (line  44)
 * magit-sparse-checkout-set:             Sparse checkouts.    (line  33)
 * magit-stage:                           Staging and Unstaging.
                                                               (line  29)
 * magit-stage-buffer-file:               Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-stage-buffer-file <1>:           Commands for Buffers Visiting Files.
                                                               (line  63)
 * magit-stage-file:                      Staging from File-Visiting Buffers.
                                                               (line  11)
 * magit-stage-file <1>:                  Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-stage-file <2>:                  Commands for Buffers Visiting Files.
                                                               (line  63)
 * magit-stage-modified:                  Staging and Unstaging.
                                                               (line  36)
 * magit-start-git:                       Calling Git for Effect.
                                                               (line  82)
 * magit-start-process:                   Calling Git for Effect.
                                                               (line 100)
 * magit-stash:                           Stashing.            (line   9)
 * magit-stash-apply:                     Stashing.            (line  52)
 * magit-stash-both:                      Stashing.            (line  14)
 * magit-stash-branch:                    Stashing.            (line 105)
 * magit-stash-branch-here:               Stashing.            (line 110)
 * magit-stash-clear:                     Stashing.            (line 118)
 * magit-stash-drop:                      Stashing.            (line  98)
 * magit-stash-format-patch:              Stashing.            (line 115)
 * magit-stash-index:                     Stashing.            (line  20)
 * magit-stash-keep-index:                Stashing.            (line  30)
 * magit-stash-list:                      Stashing.            (line 121)
 * magit-stash-pop:                       Stashing.            (line  74)
 * magit-stash-show:                      Diffing.             (line  67)
 * magit-stash-show <1>:                  Stashing.            (line 102)
 * magit-stash-worktree:                  Stashing.            (line  24)
 * magit-stashes-maybe-update-stash-buffer: Section Movement.  (line  92)
 * magit-status:                          Status Buffer.       (line  23)
 * magit-status-here:                     Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-status-here <1>:                 Commands for Buffers Visiting Files.
                                                               (line 166)
 * magit-status-maybe-update-blob-buffer: Section Movement.    (line  87)
 * magit-status-maybe-update-revision-buffer: Section Movement.
                                                               (line  77)
 * magit-status-maybe-update-stash-buffer: Section Movement.   (line  82)
 * magit-status-quick:                    Status Buffer.       (line  70)
 * magit-submodule:                       Submodule Transient. (line   7)
 * magit-submodule-add:                   Submodule Transient. (line  20)
 * magit-submodule-fetch:                 Fetching.            (line  48)
 * magit-submodule-populate:              Submodule Transient. (line  32)
 * magit-submodule-register:              Submodule Transient. (line  26)
 * magit-submodule-synchronize:           Submodule Transient. (line  40)
 * magit-submodule-unpopulate:            Submodule Transient. (line  45)
 * magit-submodule-update:                Submodule Transient. (line  36)
 * magit-subtree:                         Subtree.             (line   9)
 * magit-subtree-add:                     Subtree.             (line  24)
 * magit-subtree-add-commit:              Subtree.             (line  28)
 * magit-subtree-export:                  Subtree.             (line  37)
 * magit-subtree-import:                  Subtree.             (line  13)
 * magit-subtree-merge:                   Subtree.             (line  31)
 * magit-subtree-pull:                    Subtree.             (line  34)
 * magit-subtree-push:                    Subtree.             (line  48)
 * magit-subtree-split:                   Subtree.             (line  52)
 * magit-switch-to-repository-buffer:     Common Commands.     (line   6)
 * magit-switch-to-repository-buffer-other-frame: Common Commands.
                                                               (line   8)
 * magit-switch-to-repository-buffer-other-window: Common Commands.
                                                               (line   7)
 * magit-tag:                             Tagging.             (line   9)
 * magit-tag-create:                      Tagging.             (line  14)
 * magit-tag-delete:                      Tagging.             (line  37)
 * magit-tag-prune:                       Tagging.             (line  43)
 * magit-tag-release:                     Tagging.             (line  18)
 * magit-toggle-buffer-lock:              Modes and Buffers.   (line  18)
 * magit-toggle-git-debug:                Debugging Tools.     (line  29)
 * magit-toggle-margin:                   Refreshing Logs.     (line  34)
 * magit-toggle-margin <1>:               Log Margin.          (line  60)
 * magit-toggle-margin-details:           Log Margin.          (line  66)
 * magit-toggle-verbose-refresh:          Debugging Tools.     (line  52)
 * magit-unstage:                         Staging and Unstaging.
                                                               (line  42)
 * magit-unstage-all:                     Staging and Unstaging.
                                                               (line  50)
 * magit-unstage-buffer-file:             Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-unstage-buffer-file <1>:         Commands for Buffers Visiting Files.
                                                               (line  69)
 * magit-unstage-file:                    Staging from File-Visiting Buffers.
                                                               (line  18)
 * magit-unstage-file <1>:                Commands for Buffers Visiting Files.
                                                               (line  52)
 * magit-unstage-file <2>:                Commands for Buffers Visiting Files.
                                                               (line  69)
 * magit-version:                         Git Executable.      (line  59)
 * magit-version <1>:                     Debugging Tools.     (line  11)
 * magit-visit-ref:                       References Buffer.   (line 159)
 * magit-wip-commit:                      Wip Modes.           (line  85)
 * magit-wip-log:                         Wip Modes.           (line  47)
 * magit-wip-log-current:                 Wip Modes.           (line  55)
 * magit-worktree:                        Worktree.            (line   9)
 * magit-worktree-branch:                 Worktree.            (line  16)
 * magit-worktree-checkout:               Worktree.            (line  13)
 * magit-worktree-delete:                 Worktree.            (line  22)
 * magit-worktree-move:                   Worktree.            (line  19)
 * magit-worktree-status:                 Worktree.            (line  26)
 * scroll-down:                           Commands Available in Diffs.
                                                               (line  56)
 * scroll-up:                             Commands Available in Diffs.
                                                               (line  53)
 * with-editor-cancel:                    Editing Commit Messages.
                                                               (line  22)
 * with-editor-cancel <1>:                Editing Rebase Sequences.
                                                               (line  11)
 * with-editor-debug:                     Debugging Tools.     (line  64)
 * with-editor-finish:                    Editing Commit Messages.
                                                               (line  18)
 * with-editor-finish <1>:                Editing Rebase Sequences.
                                                               (line   7)
 * with-editor-usage-message:             Commit Mode and Hooks.
                                                               (line  51)
 
 
 File: magit.info,  Node: Variable Index,  Prev: Function and Command Index,  Up: Top
 
 Appendix E Variable Index
 *************************
 
 
 * Menu:
 
 * auto-revert-buffer-list-filter:        Automatic Reverting of File-Visiting Buffers.
                                                               (line  73)
 * auto-revert-interval:                  Automatic Reverting of File-Visiting Buffers.
                                                               (line  69)
 * auto-revert-mode:                      Automatic Reverting of File-Visiting Buffers.
                                                               (line  57)
 * auto-revert-stop-on-user-input:        Automatic Reverting of File-Visiting Buffers.
                                                               (line  65)
 * auto-revert-use-notify:                Automatic Reverting of File-Visiting Buffers.
                                                               (line  46)
 * auto-revert-verbose:                   Automatic Reverting of File-Visiting Buffers.
                                                               (line  94)
 * branch.autoSetupMerge:                 Branch Git Variables.
                                                               (line  71)
 * branch.autoSetupRebase:                Branch Git Variables.
                                                               (line  85)
 * branch.NAME.description:               Branch Git Variables.
                                                               (line  42)
 * branch.NAME.merge:                     Branch Git Variables.
                                                               (line  10)
 * branch.NAME.pushRemote:                Branch Git Variables.
                                                               (line  29)
 * branch.NAME.rebase:                    Branch Git Variables.
                                                               (line  20)
 * branch.NAME.remote:                    Branch Git Variables.
                                                               (line  15)
 * core.notesRef:                         Notes.               (line  53)
 * git-commit-finish-query-functions:     Commit Message Conventions.
                                                               (line  18)
 * git-commit-known-pseudo-headers:       Commit Pseudo Headers.
                                                               (line   9)
 * git-commit-major-mode:                 Commit Mode and Hooks.
                                                               (line  12)
 * git-commit-post-finish-hook:           Commit Mode and Hooks.
                                                               (line  54)
 * git-commit-setup-hook:                 Commit Mode and Hooks.
                                                               (line  21)
 * git-commit-style-convention-checks:    Commit Message Conventions.
                                                               (line  38)
 * git-commit-summary-max-length:         Commit Message Conventions.
                                                               (line  13)
 * git-rebase-auto-advance:               Editing Rebase Sequences.
                                                               (line  80)
 * git-rebase-confirm-cancel:             Editing Rebase Sequences.
                                                               (line  86)
 * git-rebase-show-instructions:          Editing Rebase Sequences.
                                                               (line  83)
 * global-auto-revert-mode:               Automatic Reverting of File-Visiting Buffers.
                                                               (line  21)
 * magit-auto-revert-immediately:         Automatic Reverting of File-Visiting Buffers.
                                                               (line  30)
 * magit-auto-revert-mode:                Automatic Reverting of File-Visiting Buffers.
                                                               (line  17)
 * magit-auto-revert-tracked-only:        Automatic Reverting of File-Visiting Buffers.
                                                               (line  51)
 * magit-bisect-show-graph:               Bisecting.           (line  57)
 * magit-blame-disable-modes:             Blaming.             (line 165)
 * magit-blame-echo-style:                Blaming.             (line 151)
 * magit-blame-goto-chunk-hook:           Blaming.             (line 170)
 * magit-blame-read-only:                 Blaming.             (line 161)
 * magit-blame-styles:                    Blaming.             (line 147)
 * magit-blame-time-format:               Blaming.             (line 157)
 * magit-branch-adjust-remote-upstream-alist: Branch Commands. (line 202)
 * magit-branch-direct-configure:         Branch Commands.     (line  19)
 * magit-branch-prefer-remote-upstream:   Branch Commands.     (line 158)
 * magit-branch-read-upstream-first:      Branch Commands.     (line 153)
 * magit-buffer-name-format:              Naming Buffers.      (line  25)
 * magit-bury-buffer-function:            Quitting Windows.    (line  16)
 * magit-cherry-margin:                   Cherries.            (line  21)
 * magit-clone-always-transient:          Cloning Repository.  (line  12)
 * magit-clone-default-directory:         Cloning Repository.  (line  84)
 * magit-clone-name-alist:                Cloning Repository.  (line  94)
 * magit-clone-set-remote-head:           Cloning Repository.  (line  66)
 * magit-clone-set-remote.pushDefault:    Cloning Repository.  (line  75)
 * magit-clone-url-format:                Cloning Repository.  (line 114)
 * magit-commit-ask-to-stage:             Initiating a Commit. (line  65)
 * magit-commit-diff-inhibit-same-window: Initiating a Commit. (line  97)
 * magit-commit-extend-override-date:     Initiating a Commit. (line  72)
 * magit-commit-reword-override-date:     Initiating a Commit. (line  75)
 * magit-commit-show-diff:                Initiating a Commit. (line  69)
 * magit-commit-squash-confirm:           Initiating a Commit. (line  78)
 * magit-completing-read-function:        Support for Completion Frameworks.
                                                               (line  27)
 * magit-define-global-key-bindings:      Global Bindings.     (line   6)
 * magit-diff-adjust-tab-width:           Diff Options.        (line  17)
 * magit-diff-buffer-file-locked:         Commands for Buffers Visiting Files.
                                                               (line 104)
 * magit-diff-extra-stat-arguments:       Diff Options.        (line 112)
 * magit-diff-hide-trailing-cr-characters: Diff Options.       (line  77)
 * magit-diff-highlight-hunk-region-functions: Diff Options.   (line  80)
 * magit-diff-highlight-indentation:      Diff Options.        (line  63)
 * magit-diff-highlight-trailing:         Diff Options.        (line  59)
 * magit-diff-paint-whitespace:           Diff Options.        (line  38)
 * magit-diff-paint-whitespace-lines:     Diff Options.        (line  52)
 * magit-diff-refine-hunk:                Diff Options.        (line   6)
 * magit-diff-refine-ignore-whitespace:   Diff Options.        (line  13)
 * magit-diff-unmarked-lines-keep-foreground: Diff Options.    (line 105)
 * magit-diff-visit-previous-blob:        Visiting Files and Blobs from a Diff.
                                                               (line  38)
 * magit-direct-use-buffer-arguments:     Transient Arguments and Buffer Variables.
                                                               (line  73)
 * magit-display-buffer-function:         Switching Buffers.   (line  25)
 * magit-display-buffer-noselect:         Switching Buffers.   (line  17)
 * magit-dwim-selection:                  Completion and Confirmation.
                                                               (line  42)
 * magit-ediff-dwim-resolve-function:     Ediffing.            (line 105)
 * magit-ediff-dwim-show-on-hunks:        Ediffing.            (line 111)
 * magit-ediff-quit-hook:                 Ediffing.            (line 124)
 * magit-ediff-show-stash-with-index:     Ediffing.            (line 118)
 * magit-generate-buffer-name-function:   Naming Buffers.      (line   6)
 * magit-git-debug:                       Viewing Git Output.  (line  26)
 * magit-git-debug <1>:                   Getting a Value from Git.
                                                               (line  68)
 * magit-git-executable:                  Git Executable.      (line  26)
 * magit-git-global-arguments:            Global Git Arguments.
                                                               (line   6)
 * magit-keep-region-overlay:             The Selection.       (line  52)
 * magit-list-refs-sortby:                Additional Completion Options.
                                                               (line   6)
 * magit-log-auto-more:                   Log Buffer.          (line  69)
 * magit-log-buffer-file-locked:          Commands for Buffers Visiting Files.
                                                               (line 124)
 * magit-log-margin:                      Log Margin.          (line  12)
 * magit-log-margin-show-committer-date:  Log Margin.          (line  44)
 * magit-log-section-commit-count:        Status Sections.     (line 114)
 * magit-log-select-margin:               Select from Log.     (line  28)
 * magit-log-show-color-graph-limit:      Log Buffer.          (line  78)
 * magit-log-show-refname-after-summary:  Log Buffer.          (line  74)
 * magit-log-show-signatures-limit:       Log Buffer.          (line  84)
 * magit-log-trace-definition-function:   Commands Available in Diffs.
                                                               (line  17)
 * magit-module-sections-hook:            Status Module Sections.
                                                               (line  19)
 * magit-module-sections-nested:          Status Module Sections.
                                                               (line  22)
 * magit-no-confirm:                      Action Confirmation. (line  18)
 * magit-pop-revision-stack-format:       Using the Revision Stack.
                                                               (line  34)
 * magit-post-clone-hook:                 Cloning Repository.  (line 133)
 * magit-post-commit-hook:                Initiating a Commit. (line  86)
 * magit-post-display-buffer-hook:        Switching Buffers.   (line  85)
 * magit-pre-display-buffer-hook:         Switching Buffers.   (line  76)
 * magit-prefer-remote-upstream:          Branch Git Variables.
                                                               (line 109)
 * magit-prefix-use-buffer-arguments:     Transient Arguments and Buffer Variables.
                                                               (line  65)
 * magit-process-extreme-logging:         Viewing Git Output.  (line  56)
 * magit-process-raise-error:             Calling Git for Effect.
                                                               (line 125)
 * magit-pull-or-fetch:                   Fetching.            (line  51)
 * magit-reflog-margin:                   Reflog.              (line  20)
 * magit-refresh-args:                    Refreshing Buffers.  (line  52)
 * magit-refresh-buffer-hook:             Automatic Refreshing of Magit Buffers.
                                                               (line  41)
 * magit-refresh-function:                Refreshing Buffers.  (line  47)
 * magit-refresh-status-buffer:           Automatic Refreshing of Magit Buffers.
                                                               (line  46)
 * magit-refs-filter-alist:               References Buffer.   (line 137)
 * magit-refs-focus-column-width:         References Buffer.   (line  75)
 * magit-refs-margin:                     References Buffer.   (line  89)
 * magit-refs-margin-for-tags:            References Buffer.   (line 112)
 * magit-refs-pad-commit-counts:          References Buffer.   (line  45)
 * magit-refs-primary-column-width:       References Buffer.   (line  63)
 * magit-refs-sections-hook:              References Sections. (line  13)
 * magit-refs-show-commit-count:          References Buffer.   (line  36)
 * magit-refs-show-remote-prefix:         References Buffer.   (line  57)
 * magit-remote-add-set-remote.pushDefault: Remote Commands.   (line  83)
 * magit-remote-direct-configure:         Remote Commands.     (line  20)
 * magit-remote-git-executable:           Git Executable.      (line  32)
 * magit-repolist-columns:                Repository List.     (line  12)
 * magit-repository-directories:          Status Buffer.       (line  57)
 * magit-revision-filter-files-on-follow: Revision Buffer.     (line  55)
 * magit-revision-insert-related-refs:    Revision Buffer.     (line   6)
 * magit-revision-show-gravatars:         Revision Buffer.     (line  15)
 * magit-revision-use-hash-sections:      Revision Buffer.     (line  31)
 * magit-root-section:                    Matching Sections.   (line  81)
 * magit-save-repository-buffers:         Automatic Saving of File-Visiting Buffers.
                                                               (line  13)
 * magit-section-cache-visibility:        Section Visibility.  (line  95)
 * magit-section-initial-visibility-alist: Section Visibility. (line  79)
 * magit-section-movement-hook:           Section Movement.    (line  41)
 * magit-section-set-visibility-hook:     Section Visibility.  (line 105)
 * magit-section-show-child-count:        Section Options.     (line   9)
 * magit-section-visibility-indicator:    Section Visibility.  (line 122)
 * magit-shell-command-verbose-prompt:    Running Git Manually.
                                                               (line  43)
 * magit-stashes-margin:                  Stashing.            (line 123)
 * magit-status-headers-hook:             Status Header Sections.
                                                               (line  17)
 * magit-status-margin:                   Status Options.      (line   6)
 * magit-status-sections-hook:            Status Sections.     (line  10)
 * magit-submodule-list-columns:          Listing Submodules.  (line  20)
 * magit-this-process:                    Calling Git for Effect.
                                                               (line 121)
 * magit-uniquify-buffer-names:           Naming Buffers.      (line  65)
 * magit-unstage-committed:               Staging and Unstaging.
                                                               (line  52)
 * magit-update-other-window-delay:       Section Movement.    (line  97)
 * magit-visit-ref-behavior:              References Buffer.   (line 168)
 * magit-wip-after-apply-mode:            Legacy Wip Modes.    (line  18)
 * magit-wip-after-apply-mode-lighter:    Legacy Wip Modes.    (line  54)
 * magit-wip-after-save-local-mode-lighter: Legacy Wip Modes.  (line  51)
 * magit-wip-after-save-mode:             Legacy Wip Modes.    (line  13)
 * magit-wip-before-change-mode:          Legacy Wip Modes.    (line  31)
 * magit-wip-before-change-mode-lighter:  Legacy Wip Modes.    (line  57)
 * magit-wip-initial-backup-mode:         Legacy Wip Modes.    (line  35)
 * magit-wip-initial-backup-mode-lighter: Legacy Wip Modes.    (line  60)
 * magit-wip-merge-branch:                Wip Graph.           (line   6)
 * magit-wip-mode:                        Wip Modes.           (line  30)
 * magit-wip-mode-lighter:                Wip Modes.           (line  98)
 * magit-wip-namespace:                   Wip Modes.           (line  91)
 * notes.displayRef:                      Notes.               (line  57)
 * pull.rebase:                           Branch Git Variables.
                                                               (line  50)
 * remote.NAME.fetch:                     Remote Git Variables.
                                                               (line  14)
 * remote.NAME.push:                      Remote Git Variables.
                                                               (line  23)
 * remote.NAME.pushurl:                   Remote Git Variables.
                                                               (line  18)
 * remote.NAME.tagOpts:                   Remote Git Variables.
                                                               (line  27)
 * remote.NAME.url:                       Remote Git Variables.
                                                               (line  10)
 * remote.pushDefault:                    Branch Git Variables.
                                                               (line  62)
 
 
 
 Tag Table:
 Node: Top774
 Node: Introduction6566
 Node: Installation11282
 Node: Installing from Melpa11612
 Node: Installing from the Git Repository12687
 Node: Post-Installation Tasks15501
 Node: Getting Started16786
 Node: Interface Concepts22597
 Node: Modes and Buffers22976
 Node: Switching Buffers24687
 Node: Naming Buffers29426
 Node: Quitting Windows32501
 Node: Automatic Refreshing of Magit Buffers34436
 Node: Automatic Saving of File-Visiting Buffers37317
 Node: Automatic Reverting of File-Visiting Buffers38501
 Node: Risk of Reverting Automatically43486
 Node: Sections45868
 Node: Section Movement46794
 Node: Section Visibility51668
 Node: Section Hooks58355
 Node: Section Types and Values60761
 Node: Section Options62176
 Node: Transient Commands62647
 Node: Transient Arguments and Buffer Variables64123
 Node: Completion Confirmation and the Selection71140
 Node: Action Confirmation71586
 Node: Completion and Confirmation80091
 Node: The Selection83276
 Node: The hunk-internal region86174
 Node: Support for Completion Frameworks87263
 Node: Additional Completion Options92166
 Node: Mouse Support92764
 Node: Running Git93340
 Node: Viewing Git Output93585
 Node: Git Process Status96289
 Node: Running Git Manually97254
 Node: Git Executable99944
 Node: Global Git Arguments102952
 Node: Inspecting103757
 Node: Status Buffer104914
 Node: Status Sections109925
 Node: Status Header Sections115452
 Node: Status Module Sections118071
 Node: Status Options120568
 Node: Repository List121931
 Node: Logging126709
 Node: Refreshing Logs129551
 Node: Log Buffer130972
 Node: Log Margin135795
 Node: Select from Log138948
 Node: Reflog141158
 Node: Cherries142795
 Node: Diffing144633
 Node: Refreshing Diffs147667
 Node: Commands Available in Diffs151356
 Node: Diff Options153869
 Node: Revision Buffer159332
 Node: Ediffing162652
 Node: References Buffer168702
 Node: References Sections179296
 Node: Bisecting180153
 Node: Visiting Files and Blobs182464
 Node: General-Purpose Visit Commands182992
 Node: Visiting Files and Blobs from a Diff183945
 Node: Blaming187389
 Node: Manipulating194377
 Node: Creating Repository194719
 Node: Cloning Repository195256
 Node: Staging and Unstaging201697
 Node: Staging from File-Visiting Buffers205678
 Node: Applying206784
 Node: Committing208857
 Node: Initiating a Commit209440
 Node: Editing Commit Messages214630
 Node: Using the Revision Stack217403
 Node: Commit Pseudo Headers220448
 Node: Commit Mode and Hooks221743
 Node: Commit Message Conventions224601
 Node: Branching226588
 Node: The Two Remotes226814
 Node: Branch Commands229467
 Node: Branch Git Variables242317
 Node: Auxiliary Branch Commands247691
 Node: Merging248807
 Node: Resolving Conflicts252963
 Node: Rebasing258337
 Node: Editing Rebase Sequences263126
 Node: Information About In-Progress Rebase267342
 Ref: Information About In-Progress Rebase-Footnote-1276455
 Node: Cherry Picking277051
 Node: Reverting281385
 Node: Resetting282804
 Node: Stashing284630
 Node: Transferring291011
 Node: Remotes291233
 Node: Remote Commands291385
 Node: Remote Git Variables295424
 Node: Fetching296695
 Node: Pulling299141
 Node: Pushing300167
 Node: Plain Patches304458
 Node: Maildir Patches305929
 Node: Miscellaneous307408
 Node: Tagging307754
 Node: Notes309647
 Node: Submodules311982
 Node: Listing Submodules312200
 Node: Submodule Transient314348
 Node: Subtree316835
 Node: Worktree318766
 Node: Sparse checkouts319842
 Node: Bundle322618
 Node: Common Commands322993
 Node: Wip Modes325621
 Node: Wip Graph330512
 Node: Legacy Wip Modes332825
 Node: Commands for Buffers Visiting Files335712
 Node: Minor Mode for Buffers Visiting Blobs343940
 Node: Customizing344738
 Node: Per-Repository Configuration346334
 Node: Essential Settings348588
 Node: Safety348934
 Node: Performance350695
 Ref: Log Performance353658
 Ref: Diff Performance354963
 Ref: Refs Buffer Performance356304
 Ref: Committing Performance356879
 Node: Microsoft Windows Performance357861
 Node: MacOS Performance359052
 Ref: MacOS Performance-Footnote-1360075
 Node: Global Bindings360157
 Node: Plumbing362385
 Node: Calling Git363214
 Node: Getting a Value from Git364739
 Node: Calling Git for Effect368467
 Node: Section Plumbing374361
 Node: Creating Sections374589
 Node: Section Selection378485
 Node: Matching Sections380281
 Node: Refreshing Buffers386202
 Node: Conventions389346
 Node: Theming Faces389538
 Node: FAQ397643
 Node: FAQ - How to ...?398081
 Node: How to pronounce Magit?398438
 Node: How to show git's output?399241
 Node: How to install the gitman info manual?400027
 Node: How to show diffs for gpg-encrypted files?400997
 Node: How does branching and pushing work?401593
 Node: Should I disable VC?401926
 Node: FAQ - Issues and Errors402529
 Node: Magit is slow403474
 Node: I changed several thousand files at once and now Magit is unusable403767
 Node: I am having problems committing404493
 Node: I am using MS Windows and cannot push with Magit404974
 Node: I am using macOS and SOMETHING works in shell but not in Magit405592
 Node: Expanding a file to show the diff causes it to disappear406426
 Node: Point is wrong in the COMMIT_EDITMSG buffer407014
 Node: The mode-line information isn't always up-to-date408059
 Node: A branch and tag sharing the same name breaks SOMETHING409122
 Node: My Git hooks work on the command-line but not inside Magit410009
 Node: git-commit-mode isn't used when committing from the command-line410855
 Node: Point ends up inside invisible text when jumping to a file-visiting buffer413126
 Node: I am no longer able to save popup defaults413975
 Node: Debugging Tools414956
 Node: Keystroke Index418130
 Node: Function and Command Index459744
 Node: Variable Index517945
 
 End Tag Table
 
 
 Local Variables:
 coding: utf-8
 End: